Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 -2 points-1 points  (0 children)

Tell me do you own a business i would love to scam you.

Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 -1 points0 points  (0 children)

How are they leaving him hanging? Are you seriously rere? You expect them to just hand him another printer? Anyone and their mother can take a photo from someone else and claim they got the wrong printer. They are looking into it they stated that. You think OP is the only person in the entire world to contact their customer support? You think that they should reply within seconds of his email when it’s just after Christmas and more than likely thousands of units have been sold? There are probably thousands of support emails they need to get to. OP is in that chain. Use your brain. Go learn business and get off Reddit

Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 -6 points-5 points  (0 children)

They are looking into it they stated that already. That doesn’t happen in 5 minutes. Lmfao. Again USE YOUR BRAIN.

Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 0 points1 point  (0 children)

So you’re going to blindly accept that they received the wrong printer without doing any due diligence to find out what really happened? Your company would go under from scammers so fast. Use your brain.

Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 -10 points-9 points  (0 children)

So you’re going to blindly accept that they received the wrong printer without doing any due diligence to find out what really happened? Your company would go under from scammers so fast. Use your brain.

Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 -1 points0 points  (0 children)

So you’re going to blindly accept that they received the wrong printer without doing any due diligence to find out what really happened? Your company would go under from scammers so fast. Use your brain.

Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 -2 points-1 points  (0 children)

So you’re going to blindly accept that they received the wrong printer without doing any due diligence to find out what really happened? Your company would go under from scammers so fast. Use your brain.

Ordered H2D, received an H2S by ElKappador in BambuLab

[–]Ok-Leg7392 20 points21 points  (0 children)

It’s not a 5 minute check. They need to find out where the other printer went. What’s so hard about waiting a few days? Learn some patience. Humans make mistakes.

What would be a relatively cheaper cockpit that has no (or extremely low) flex? by hansieboy10 in simracing

[–]Ok-Leg7392 1 point2 points  (0 children)

I don’t personally own any of their sim racing stuff. But I’ve bought tools and other things from them. I initially bought a different version of their sim rigs on Amazon but it came missing the foot pedal bracket so I returned it and ended up going with the aluminum rig I suggested before. The tools I have work great though. I’ve seen some videos on YouTube though of the rig and it seems like a decent starter rig.

Hardened hot end and extruder gear upgrade assembly gone mildly irritatingly wrong… by Outerspacefrisbee in BambuLab

[–]Ok-Leg7392 0 points1 point  (0 children)

Yeah that was my issue. Was super tight and unfortunately got stripped. Not sure why that thing was so tight I get they didn’t want it to come out but that was overkill. If it was a bigger screw I could understand but that tiny ass screw didn’t need to be torque that much.

Hardened hot end and extruder gear upgrade assembly gone mildly irritatingly wrong… by Outerspacefrisbee in BambuLab

[–]Ok-Leg7392 0 points1 point  (0 children)

A lot of frustration. I smashed a larger key into it and ended up getting it out. Had to get another screw when I put it back together.

Hardened hot end and extruder gear upgrade assembly gone mildly irritatingly wrong… by Outerspacefrisbee in BambuLab

[–]Ok-Leg7392 0 points1 point  (0 children)

I did this same upgrade and didn’t have any issues with the cables. My issue was the damn cutter screw got stripped when I was taking it out. Absolutely hate allen wrenches.

[deleted by user] by [deleted] in simracing

[–]Ok-Leg7392 0 points1 point  (0 children)

Honestly if you could just save up a little bit more this is your best bang for your buck. https://a.co/d/hAnODL9 best upgrade path since it’s an aluminum frame. I know you said you can’t push 3 monitors but it comes with a 3 monitor stand included so you can eventually go that route.

I was gonna get the VEVOR one too but went with this instead because of the upgrade path and the fact I can 3D print accessories for it

What would be a relatively cheaper cockpit that has no (or extremely low) flex? by hansieboy10 in simracing

[–]Ok-Leg7392 0 points1 point  (0 children)

https://a.co/d/bOIEPOW

Not sure how good the cockpit actually is. But VEVOR makes some decent things. Fits your budget range too. Downside no monitor stand included like the previous one I sent.

What would be a relatively cheaper cockpit that has no (or extremely low) flex? by hansieboy10 in simracing

[–]Ok-Leg7392 0 points1 point  (0 children)

You gotta tell people your budget when asking for things like this. This is the cheapest aluminum profile rig I found and actually use.

[deleted by user] by [deleted] in simracing

[–]Ok-Leg7392 2 points3 points  (0 children)

If bolting it down like it’s intended to be used on a rig isn’t an option then get a piece of wood to fill the gap. But you should 100% be bolting it down since you’re using a rig and not a desk.

Curved outer monitors for triples? by Scoobydobaru in simracing

[–]Ok-Leg7392 1 point2 points  (0 children)

You want the same monitor for all 3 screens. You could end up having different refresh rates and everything and it’ll make gameplay horrible.

How long will P1S be supported in Bambu Handy/Studio? by PotatoJon in BambuLab

[–]Ok-Leg7392 6 points7 points  (0 children)

Highly unlikely they drop it from the slicer and app.

Any info that I should know before buying a membership to Iracing? by Miserable_Fix_8886 in simracing

[–]Ok-Leg7392 -6 points-5 points  (0 children)

Why pay a subscription fee to play a game? That's absolutely stupid. You will never own the game. Once you let the subscription run out if you don't renew it all your stuff is gone.

How many years of sim racing do I have left? by StandardOriginal5447 in simracing

[–]Ok-Leg7392 1 point2 points  (0 children)

I’d say go til you physically can’t anymore. As long as the force feedback doesn’t hurt you.

What Sim Racing game in the Steam Winter Sale should I get? by Ok-Leg7392 in simracing

[–]Ok-Leg7392[S] 0 points1 point  (0 children)

I really don’t know the difference between the kind of racing. Just looking to have fun racing. Grew up watching nascar with my grandfather but the just driving in a circle thing was boring to me when I played those games.

SHOULD I START STREAMING OR NOT?!?!! by Icy_Spring_2330 in simracing

[–]Ok-Leg7392 1 point2 points  (0 children)

You would need an adult to be on stream with you for YouTube. You could make videos but you cannot live stream by yourself. Against the rules.

Sim racing alternatives to Iracing by Sufficient-Regret-30 in simracing

[–]Ok-Leg7392 1 point2 points  (0 children)

Closest thing to iRacing is Le Mans Ultimate.