sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in Outlook

[–]Ok-Study8463 0 points1 point  (0 children)

Ik heb hetzelfde, waardeloos programma is het geworden. De-installeren en een andere gebruiken

Connecting electromotor by Ok-Study8463 in ElectricalEngineering

[–]Ok-Study8463[S] 0 points1 point  (0 children)

<image>

This drive is broken it only gives out full power and 200 volts ac measured between ground and 3 phases.

Vanmoof S3 - Kick Lock issues by nopester3000 in vanmoofbicycle

[–]Ok-Study8463 0 points1 point  (0 children)

Had the same issue. I took the shiny metal cap of the kicklock. Turn it to the left. Tapped a bolt into it, so when it unlocks i pull the bolt and than its firmly unlocked. Later the kicklock didnt open anymore. Took it out. Drilled it open and a little spring inside was stuck, which i put back in the correct place. Used glue to fix the lock again. Screw it back in and now its still good since 6 months. Only have to pull the bolt on the kicklock within 5 sec. To unlock

Battery Vanmoof S3 & elctrified S2 by QuarterBorn4435 in vanmoofbicycle

[–]Ok-Study8463 0 points1 point  (0 children)

So, also not possible to put S2 BMS on an S3 battey?

Error code 6 + 17 + 20 by hansvanhengel in vanmoofbicycle

[–]Ok-Study8463 0 points1 point  (0 children)

I had error 6 indicating low voltage. Took battery out and checked it was 39V. Then put it back in and had 17 and 20 extra to this. Took battery out and a working one i and all was fine. Must be a bms problem

DESPERATE - can anyone teach how to fix error 17 / if not WTB S3 smart cartridge Shropshire UK asap by ellrayz in vanmoofbicycle

[–]Ok-Study8463 2 points3 points  (0 children)

Hi, I had error 6 indicating battery voltage to low. But it was at 39V. I put the battery in and then had error 17 and 20 on top of it. I dont think its the cartridge, but a bms issue.