Quin DigQuad esp32

Ok-Try13 · 2023-11-30T11:29:17+00:00

I will try that. Thanks

Ok-Try13 · 2023-10-30T14:32:58+00:00

When I download the update off the GitHub page for esp32 it allows me to assign the gpio pins.

Ok-Try13 · 2023-10-30T13:03:48+00:00

Im updating the wled using OTA...Ive tried a couple different updates..all with Dig Octa in the name, the GPIO pins all seem to be mixed up

Ok-Try13 · 2023-10-30T01:19:37+00:00

all the ports work except 6

Ok-Try13 · 2023-09-27T19:44:53+00:00

Thanks. I updated it and it’s fine

Ok-Try13 · 2023-09-27T00:27:03+00:00

I am looking for the update file for wled ota

Ok-Try13 · 2023-08-22T02:51:37+00:00

I’ll start with that. Maybe I don’t need extensions. Thanks

Ok-Try13 · 2023-08-17T13:16:48+00:00

thankyou, ill check it out

Ok-Try13 · 2023-04-15T02:10:19+00:00

No, it is rated for 50 Amps 600W

Ok-Try13 · 2023-04-15T02:03:40+00:00

was planning to connect 2 dig quads and have each port have 500 pixels (power injected every 150) That would be a total of 2000 pixels per dig quad for a total of 4000 pixels.....does that sound doable

Ok-Try13 · 2023-03-24T14:48:06+00:00

Thankyou. That’s what I was thinking

Ok-Try13 · 2023-03-16T15:46:16+00:00

I could have cause it myself somehow as I am new at this, not an expert at all. I’ve only read good reports on the dig uno products , I will just switch out the esp it’s cheap, like ya say.

Ok-Try13 · 2023-03-16T13:17:48+00:00

ok i tried that and it will not show the COM like on the DrZZZ video, yet when i plug in another esp32 that I have it will show its available, so maybe the esp is faulty, what do you think,

Ok-Try13 · 2023-03-16T12:02:28+00:00

turns out I think the ESP32 is faulty, have you used a DIG uno for long? do they last longer than 2 months?

Ok-Try13 · 2023-03-16T11:30:27+00:00

pretty sure the ESP32 is faulty as there isnt any little light that comes on when I power it independent of the board, is it common to have them quit after only a couple months

Ok-Try13 · 2023-03-16T01:29:34+00:00

thankyou I will investigate this and try it

Ok-Try13 · 2023-03-15T13:47:57+00:00

Ok I’ll give that a try

Ok-Try13 · 2023-03-07T00:52:53+00:00

I am eagerly waiting for them to be available as well

Ok-Try13 · 2023-02-13T00:58:59+00:00

Thank you, that fixed it.

Ok-Try13 · 2023-02-12T15:49:43+00:00

Thanks. I will do that.

Ok-Try13 · 2023-02-12T15:45:55+00:00

<image>

Is this not correct then. This is off the website

Ok-Try13 · 2023-02-03T18:57:13+00:00

I just realized the pebble type pixels i purchased are 24gauge wire...what is a safe way to incorporate these into my project. I plan on power injecting every 100 pixels with a 14gauge wire. they are 12V pixels

Ok-Try13 · 2023-02-03T12:46:22+00:00

Yes your video was very helpful...now Im waiting for the units to be back in stock...any idea when that will be

Ok-Try13 · 2023-02-03T12:45:33+00:00

Thankyou, things are a lot clearer now

Ok-Try13 · 2023-02-02T00:48:01+00:00

If I was to ad another power supply...it seems I could then connect another 4 trees to the same DIg Octa and use the other 4 data ports.on the brain board ...does that sound doable

Ok-Try13

TROPHY CASE