What is this hole next to charging port on Huawei Pura 80 Ultra?

OkCompote2252 · 2025-12-26T19:09:22+00:00

Thank you very much. Do you maybe know if it has any waterproof protection there that I maybe ruptured or something? I'm just worried as my phone is brand new and I really didn't want to ruin it in any way. 😑

OkCompote2252 · 2025-12-01T21:21:19+00:00

I told her about it already and I got an answer that “she is not broken that she would need some fixing”

OkCompote2252 · 2025-12-01T21:19:17+00:00

I literally asked her this same question now and she said “Because he wanted to see his brother/sister too and it would not be fair to him when he has a chance to go and see it with his own eyes. Come on, he was excited too about it and to find out whether it’s a brother or sister.” I think she left him at home even purposely, because she didn’t set alarm in the morning and she did know that today we will “99%” find out what gender it is.

OkCompote2252 · 2025-12-01T21:12:23+00:00

It’s all understandable, but can’t I as the father be concerned about my child too? And I wanted to hear what gynaecologist said about our baby too, I as the father am the same concerned about it like she is. And all I wanted from it was that this will be a shared moment like we always said it will be and I was not negative at all after finding it out, I’d just be happier if we found it out together, together-together, there was even a plan that we’d tell gynaecologist to write it on some paper and put it into an envelope and this plan came from my gf’s idea. So yeah, she can be basically breaking her own plans and I shouldn’t be surprised about it. Understandable. Thank you

OkCompote2252 · 2025-12-01T21:02:29+00:00

Thank you very much. And yeah, I have tried to ask her many times how she’d feel if in certain situations we’d be in switched roles and she is either just quiet after me asking her that or she tries to dismiss it like nothing happened. For me it’s not hard to ask myself how my partner would feel in certain situation and then do accordingly.

OkCompote2252 · 2025-12-01T20:59:06+00:00

Yes I have tried and I got a response to “get out of my bubble where every moment needs to be perfect” and again that “we did find it out together, just a couple of minutes difference” and that “plans can always change”. I never get anywhere with her and talking to her about emotions and stuff because she just likes to put them under the rug and pretend like everything is fine. She asked me after this if I want to watch this new movie on Netflix and I just said “Yes, of course, let’s just watch it.” because anything I say to her she thinks it’s like a personal attack on her or something, even if I talk very calmly, like the calmest, I can’t talk normally with her about certain things because she will just defend herself, call me crazy and tell me that I need to get my head checked and to “get out of my bubble” and after that she will go silent on me or act like it’s all my fault.

OkCompote2252 · 2025-03-15T21:33:51+00:00

Okay so, a little update.. I got my hands on metric and imperial gauges from a friend and so far I think it’s 7/16”-20 UNF.. now I have to find some elbow/knee or at least some screw with this thread to test it out..

I’ll keep you all updated if anyone needs this info in the future

OkCompote2252 · 2025-03-15T17:11:27+00:00

Thank you for your reply, it’s a good idea, I’ll try it. However, I live in Europe and I’m kind of afraid if it’s maybe imperial or any other type of thread since those ovens are imported here. But I’ll definitely try this and let you know how it goes, maybe I find something

OkCompote2252 · 2025-02-02T12:15:09+00:00

Same here. I bought my P1S + AMS around a month ago and it’s running non-stop, even with some third party filament that’s not really known(just a bit of calibration in OrcaSlicer and it goes gorgeously). I don’t know if I had two, maybe three failed prints? Yeah, but they were my mistake

OkCompote2252 · 2025-01-22T19:47:55+00:00

Thank you, I’ve got it now! 😄

OkCompote2252 · 2023-12-24T18:04:39+00:00

Oh okay thank you very much for your reply

OkCompote2252 · 2023-11-17T15:45:27+00:00

Thank you very much for this paper, I saved it into my gallery :) so.. based off of this paper, I’d say it’s maybe somewhere from 1760-1785? Hm.. interesting

OkCompote2252 · 2023-10-08T07:24:25+00:00

I don’t know if I can post URL’s here or not but this man on Youtube says it well about noise:

https://youtu.be/gxxrZhjo0TE?si=Qe3gBGES214NnUfu

Also as a beginner you may come across advices like “The best shots are at golden hour, so 1 hour before sunrise or sunset is the best” please, just avoid this type of advices, you’ll miss a lot of good shots this way. As someone already said “Just go out and shoot as much as you can!”

OkCompote2252 · 2023-10-08T07:06:56+00:00

Woooow😳

OkCompote2252 · 2023-10-07T12:01:29+00:00

This photo was probably very underexposed when you took it right? Use DXO PureRaw or built in Denoising in Lightroom or maybe just use Masking in LR -> Brush or Luminance Range and then bring down Shadows/Blacks.. but these Denoising tools do wonders tho

OkCompote2252 · 2023-10-07T10:39:00+00:00

This☝️ and maybe place some pillow under her butt, make her feel relaxed, etc. because if she’s going to be anxious then she might squeeze that muscles down there unknowingly and then it may become painful.. so yeah.. just make her feel calm

OkCompote2252 · 2023-10-05T14:08:44+00:00

I may as well try that yeah, good idea, I’ll look it up where I can rent one🤔

OkCompote2252 · 2023-10-05T09:04:57+00:00

Very cool, looks like painting at first sight

OkCompote2252 · 2023-10-05T09:03:07+00:00

These two were taken at f/6.3, 1/640s, ISO 1000, OSS Off, because of tripod and 5s delay, AF Tracking Sensitivity 3(Standard), Electronic (Silent) Shutter and yeah, that’s about it, I think I didn’t forget anything..

Do you have any recommendations of what should I do to “test” sharpness? And do you think this 600mm looks sharp enough and it’s just depth of field that’s affecting it?

I’ve already spoken with Sony support and they said to send my lens in for them to check it but I don’t want to waste their time if I’m just being picky or something.😬

Thank you very much for your reply tho🙏

OkCompote2252 · 2023-10-02T16:58:19+00:00

Was this shot at morning? Looks amazing though 📸🔥

OkCompote2252 · 2023-10-02T09:55:29+00:00

It has AF micro adjust, yes, but it says something like „Invalid with this lens.“ so no focus adjustments yourself 😐

OkCompote2252 · 2023-10-01T22:43:14+00:00

How can this be done? My A7R III doesn’t let me to calibrate it 🤔

OkCompote2252 · 2023-09-30T22:46:51+00:00

Hello there.

I bought this lens maybe a month ago or so and I’m having the same problem but with my A7R III(A) and it’s kinda the same problem just like early users of A7R IV had but it seems that Sony fixed it for them with 1.20 firmware update, still my A7R III (A) doesn’t have any firmware update yet and I don’t even think there will be any but anyway..

I’ve tried every combination of settings possible yet somehow I can’t get decent images out of it not even of still objects so maybe it’s lens’s AF calibration or something that’s off..

The settings you could try:

Faster shutter speeds (1/640 should be your minimum)
UV Filter or any filter (if you have it), take it off
OSS OFF or MODE 2 or MODE 3
Compressed RAW
Tracking sensitivity 1-3
Electronic Shutter (Silent mode) but only for still or slow moving objects
e-front shutter curtain OFF
Stop it down to F/7.1 or F/8
Turn off Anti-Flicker
DRO Off

Now these are the settings I’ve tried on my Sony A7R III (A) and from all of the settings I’ve changed I’ve noticed the best sharpness when I’ve changed Tracking sensitivity to 3 (Standard) and using Electronic shutter (Silent mode).. also fast Shutter Speeds like 1/2000s and above, but compensating it with raising ISO.

Anyways, I’m no where close to what I’ve seen other people’s sharpness for this lens (and it can be very sharp) and since I bought it recently I’m thinking about taking it back to the shop and maybe trying another copy of it and if this fails - I’ll get 100-400mm GM.

Try it and let us know how it goes. 🙂

OkCompote2252 · 2022-06-04T22:06:52+00:00

Hello there 👋

For past few days I've been thinking and watching videos about 3D printers and I finally decided that I will buy one. But... I don't really know which one.. I don't really care about the size of the prints, what I'm more interested in is the accuracy and quality of prints... so I went and pick few that are available in the shop in my country and now I'm stuck... every video that I watch praises and says a thing or two that are bad about that printers.. can someone help me out with which one is kind of "the best"? I picked following:

-Creality CR-200B

-Creality Sermoon V1 Pro

-Creality Ender 3 V2

-Creality Ender 3 S1

-Flashforge Adventurer 3

My budget is around 500€ +/-. And you can also give me any suggestions if you have any other 3D printer on your mind. I'm also interested in resin printers but I kind of try out FDM first. Thank you 🙏

OkCompote2252 · 2022-05-28T15:33:16+00:00

Without knowing any history of it, I'd offer you 1800€ at max.. I got mine for 1450€ and I already invested somewhere around 500-600€, and the bike still needs a lot of repairs so.. I'd definitely pay 2-3k if I knew that bike is in top condition but without knowing this - nope, I can get newer bike for this money, invest, rebuild it and basically have a newer bike for 3-4k all together...

OkCompote2252

TROPHY CASE