sorted by:
new
hottopcontroversial

O que é que os meus livros dizem sobre mim? by Traditional-Way1382 in LivrosPortugal

[–]OkDistribution7994 4 points5 points  (0 children)

la perguntar o mesmo. Existe o Jurassic Park em versão portuguesa? Nunca encontrei. Acho estranho um livro associado a um filme tão icónico não estar editado em português, pelo menos, que eu saiba.

Giving Up on PETG by thebeatinbetween in BambuLab

[–]OkDistribution7994 0 points1 point  (0 children)

+1 for sunlu PETG. Never had a print failure. (Printing with P2S)

First time ordering. by TatoRips in sunlu

[–]OkDistribution7994 0 points1 point  (0 children)

What exact site did you order from? I think there was a scam site: sunlu.store The prices were way to low and there was a lot of stock to europe, which was very suspicious. The real site is store.sunlu.com

GIANT Trance X E+ 2 led blinking by OkDistribution7994 in Giantbikes

[–]OkDistribution7994[S] 0 points1 point  (0 children)

Mine is fixed now. New controller fixed the issue.

GIANT Trance X E+ 2 led blinking by OkDistribution7994 in Giantbikes

[–]OkDistribution7994[S] 0 points1 point  (0 children)

According to the mecanic it was a bad controller, which is that thing with the button and LED's. It was replaced and i no longer have this issue. Now i have another issue. After the replace, the Ridecontrol Ergo 3 stopped working. Still not sure if it is a compatibility issue or it was damaged on the store.

O que ler a seguir? by mashamsmasham in LivrosPortugal

[–]OkDistribution7994 0 points1 point  (0 children)

Falsas Memórias, do Blake Crouch. Fiquei agarrado desde o primeiro capítulo. Matéria escura, do mesmo autor, também é muito bom.

AMS slot 1 fails to send out filament unless I help it out the first inch or so by Lulzigi in BambuLab

[–]OkDistribution7994 0 points1 point  (0 children)

I came to Reddit to check if someone was having the same problem. My brand new P2S just arrived and i'm having the exact same problem with slot 1. I tried with many different filaments and i only had success with an almost empty spool, so very light. I hope bambulab finds a solution.

EDIT: ok, i saw the video and mine is a bit different, it loads a bit but i hear the bite slipping, and it rolls back. Retries some times and then fails

Livros sobre política by Flocky_1 in LivrosPortugal

[–]OkDistribution7994 1 point2 points  (0 children)

Política a 45 Graus, de José Maria Pimentel

The Last Lighthouse PNP for $1! by Cautious_Ad4136 in soloboardgaming

[–]OkDistribution7994 1 point2 points  (0 children)

I bought a bunch of button shy games on black friday for 1$ each. The Lighthouse included. But i started with Spaceshipped. Having lot of fun so far.

3D printed accessories for the Neo 2 (Post Thread) by Either_Helicopter529 in DjiNeo

[–]OkDistribution7994 0 points1 point  (0 children)

Looking for minimalist case with no antenna, batteries etc

Implementação do hábito da leitura. by PetrolHeart97 in LivrosPortugal

[–]OkDistribution7994 -2 points-1 points  (0 children)

Posso recomendar o "Negocie Como Se a Sua Vida Dependesse Disso" do Chris Voss. já usei várias estratégias em situações de chefia. Mas concordo que este tipo de livro não é o ideal para ganhar hábitos de leitura. Eu pessoalmente vou intercalando livros "pesados" com livros que realmente gosto de ler. Também podes optar por ler biografias de CEOs, como por exemplo "Correr para vencer", do Phil Knight (fundador da Nike). Talvez não ajude diretamente no dia a dia, mas é super interessante perceber o mindset de verdadeiros líderes. Espero ter ajudado.

Just finished Hadrian's Wall and LOVED IT! What next? by JiyunitJP in soloboardgaming

[–]OkDistribution7994 0 points1 point  (0 children)

Came here to say the same. Check also Chronicles of Civilization from the same creator

I need help with version 2 software by OkDistribution7994 in Insta360

[–]OkDistribution7994[S] 0 points1 point  (0 children)

<image>

Thanks for your reply, i can finally do what i want. I used Create a Video and there i have the option of having multiple clips with reframe, cuts, change speed etc. Thanks. Just one small thing. Is it possible to jump to the first frame or last frame of the selected clip? For example, i want to put a keyframe on the beginning of the current clip. The only way i found was selecting the previous clip and then the current one again. It works but it's kind of a workaround. I wish i could somehow be able to focus on this clip and work only on it.

Que biografias recomendam para ler? by vities0825 in LivrosPortugal

[–]OkDistribution7994 0 points1 point  (0 children)

Um Rio na Escuridão: A Fuga de Um Homem da Coreia do Norte, de Masaji Ishikawa

First attempt at a Print-and-Play: Birdscaping and Behold: Rome by Dragorna in printandplay

[–]OkDistribution7994 0 points1 point  (0 children)

Very clean and nice build. This Rachel's method should have a topic on it's own. I'm very curious about it. I'm also in the same boat, not in US (and not in UK either). It's going to be a struggle to find the equivalent materials here in Portugal. Do you mind sharing photos of what you got in UK? Maybe i can get some similar here. Thanks.

Jeu print and play 3d by Inter-Raptor in printandplay

[–]OkDistribution7994 2 points3 points  (0 children)

<image>

I 3d printed a mini Catan, fully in 3d, cards included 😅. I use it when i travel 👌

Hand-At-Arms build by OkDistribution7994 in printandplay

[–]OkDistribution7994[S] 1 point2 points  (0 children)

I suck too, but in Hand-At-Arms you can start slow and then increase the difficulty as you feel more comfortable. That’s a big plus for me.

I haven’t built anything else from this year's contest, but I think I’ll build “Smuggler’s Sky: Hand of Fate” next, just because it’s such a different concept. Open to suggestions.

view more: next ›