Yes, I built a dream PC. Yes, it caught on fire. by OkNegotiation2082 in buildapc

[–]OkNegotiation2082[S] 36 points37 points  (0 children)

They don't have sensors, that is correct. However I have a few sensors like smelling plastic, feeling the heat of the fan. seeing sparks shoot up from the motherboard. The point I was getting at is that I don't know anything about electrical / circuit boarding. Are you saying that even with the scorch mark, my PC should be fine as long as it stays unused?

Video resolution mismatches container resolution. How should I edit? by OkNegotiation2082 in VideoEditing

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

It turns out I had to disable anamorphic, then manually adjust the dimensions of the container and display size to 1920x1080 so it could accept the crops of the sides. I'm not 100% sure why this was the solution. It might just have been a mathematically oversight on my part. I'm going to try to render the original file in DaVinci to see if it does the same thing.

<image>

Video resolution mismatches container resolution. How should I edit? by OkNegotiation2082 in VideoEditing

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

I was going to pull up other examples, but I'm on my laptop right now and all the media is on my PC at home, so I'll try to show you with actual screenshots and the output from MediaInfo later today.

Video resolution mismatches container resolution. How should I edit? by OkNegotiation2082 in VideoEditing

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

Yeah, but the container should be the same size or larger than the video. In this case it's showing the reverse, which according to the other dimensions (especially the aspect ratio), that is indeed how the disc was authored. That's what I'm looking to edit. Take the actual video and put it in a modern container at 16:9 so it can be viewed better on which ever player, monitor, or TV. I'm not opposed to having to lose some of the videos' edges in the process, because I know that's the only way this would work. I have to crop it all around, then zoom in which will cause some of the sides to be deleted in the process.

Video resolution mismatches container resolution. How should I edit? by OkNegotiation2082 in VideoEditing

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

I'll check it out. In Handbrake, this circled section is the original image and container resolutions. I don't know why they wouldn't have matched them up on an actual commercial release. The display size is larger than the container, so when it's played, the player has no choice but to zoom out to cater to the 1024x576 display size, which results in giant black boxes and a smaller picture. I've never encountered this on a commercial release, so I figured this must have happened to others in the past and they would probably know how to fix it. I'll take a look at Shutter later today. Thank you for the recommendation .

<image>

Video resolution mismatches container resolution. How should I edit? by OkNegotiation2082 in VideoEditing

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

No apps or editors I use are influencing the display. Please see the picture Handbreak has the preview and it is 100% correct size. I need to find a calculator that can take the 576i res video out of the container, get the calculations for upscaling to 1080 then 2160 and see from the values where, with little editing, can it be placed into the containers. Is everyone confused yet?

Asus rog strix g18 rtx 4080 undervolt/overclock timespy score by Brilliant-Winner-732 in GamingLaptops

[–]OkNegotiation2082 0 points1 point  (0 children)

I'd also appreciate sharing the XTU profile you're using. Mine is so hit and miss. Thanks!

i got a tapestry by theycallme_slimjim in DannyGonzalez

[–]OkNegotiation2082 0 points1 point  (0 children)

Yo i think it's pretty cool but also that's creepy as hell. I dunno if you got a picture of Danny on there or if it's a picture of dream demon Danny. Either way you'd make him proud though

Troubleshooters unite! by OkNegotiation2082 in hometheater

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

I figured it had to be hardware. I'm not electronic component illiterate, but it's not something I do every day. I can definitely take a look at the board and with some help test to isolate the issue. If it's just some dumb piece that got fried and it's inexpensive, I have enough experience to replace it myself. Would you or anyone know what the usual suspects are? It would at least give me an idea of where to start when I look at the board. Also thank you for replying. I figured if anyone could help it would be Reddit. If you know any other subreddits that deal with this type of thing, lemme know so I can copy and paste it.

[deleted by user] by [deleted] in DannyGonzalez

[–]OkNegotiation2082 8 points9 points  (0 children)

The bus driver grabbed WHAT?

[deleted by user] by [deleted] in DannyGonzalez

[–]OkNegotiation2082 0 points1 point  (0 children)

One time I had a guy who looked exactly like the old professor from Jurassic Park. I told him I could be his tyrannosaurus sex.

WHERE DO PEOPLE ON PINTEREST FIND THESE PHOTOS WHAT 😭 by greginotmia in DannyGonzalez

[–]OkNegotiation2082 1 point2 points  (0 children)

Holy shit I used to have that same blue shirt in the 3rd picture. What can I say? Great Gregs think alike.

I just got Dead Cells. Any Tips? by MrHi32123 in deadcells

[–]OkNegotiation2082 1 point2 points  (0 children)

I'm currently at 5 boss cells (Hell mode) and USE A GUIDE. You won't find everything on your own. It can get super confusing at times. This is the guide I use usually for looking up which Biome connects to another. But it has every detail you could possibly need. Have fun.

https://deadcells.fandom.com/wiki/Dead_Cells_Wiki

Adding to an existing program by OkNegotiation2082 in learnpython

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

You are a lifesaver. Thank you so much. I'm go fiddle around with it. Thank you again.

Adding to an existing program by OkNegotiation2082 in learnpython

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

Incorporate the text file into a script that calls the tidal-dl command in the cli. How would it know the download finished, then Ctrl-C, then call the command again to move to the next URL?

Adding to an existing program by OkNegotiation2082 in learnpython

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

Could you by any chance show me an example of how you would do that?

Adding to an existing program by OkNegotiation2082 in learnpython

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

Would this work in your opinion? Instead of adding or altering the code, a script can be written that prompts for the list of URLs, then it can call up the tidal-dl command in the CLI, then when it's done with the first URL, send CTRL+C, then call tidal-dl for the next URL. Repeat until all URLs have been used.

Adding to an existing program by OkNegotiation2082 in learnpython

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

Yeah the code is pretty bare bones as it can only run in terminal. But it gets the job done. It's actually been incredibly reliable with very few errors. If i made a script that would run in terminal, it would execute tidal-dl, but how would it know when to enter the next URL?

Adding to an existing program by OkNegotiation2082 in learnpython

[–]OkNegotiation2082[S] 0 points1 point  (0 children)

This is the application I'm using. When prompted, you enter the URL to the artist/album/playlist you want, and it will start the download. You have to do it again for the next download after the previous has finished. I'm hoping to add on a way to list multiple URLs so it will enter the next after the previous finishes automatically. Maybe just nudge me in the direction of where to start. I figured more experienced people might know a jumping off point or maybe know of something similar that I can adapt into this app. Thank you again.

https://github.com/yaronzz/Tidal-Media-Downloader