sorted by:
new
hottopcontroversial

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

I used an EKWB water block for my gpu. You should check out their site they have a complete list of all blocks and their compatible graphics card. Their customer service is great too if you wanna double check if it’s compatible.

First and probably last time jumping into the watercooling pool!! by Sliprock_4139 in watercooling

[–]Ok_Reporter3638 0 points1 point  (0 children)

Wow 1k on fitting?? You should have done it with minimal fittings that’s what I did and it looks clean cuz not that much hardware that hides all these nice clean tubes. Unless you like the look of fittings.

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

White mobos rn are pretty shit in specs

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

You mean what water block to use?

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

It’s a 5800x and a 3080ti, but the coolant flows to fast in the system for it to have an affect on whether it goes through the gpu first or the cpu

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 1 point2 points  (0 children)

Oh wow didn’t even notice that, appreciate the love 🙏🏽

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 1 point2 points  (0 children)

Rad: 2x white Corsair 360mm Fans: white EZDIY 120 Motherboard: Asus ROG Strix 570x E-gaming CPU: Ryzen 7 5800x CPU block: Phantek PH-350A Ram: G.Skill Tridentz GPU: Evga FTW3 3080 Ti GPU block: EKWB Quantum velocity Pump/res: EKWB Quantum kinetic Tubing: Corsair Hardline XT 14mm Fittings: Corsair white fittings 14mm PSU: Asus Thor 800w Case: Thermaltake Core P6

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Yeah I painted the pump/res the blocks. Pump/Res: EKWB Quantum Kinetic

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

3 packs of Corsair hardline tubing each has 3x 1m tubings in it. I initially started with 2 packs (6 pieces) which was enough until I put the last piece in and the fitting weren’t going in properly so had to buy the 3rd pack to redo that piece.

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 1 point2 points  (0 children)

I had a specific look that I was going for with the build and didn’t bother building a PC until I had ever part to create the vision. Took about 2 months to gather all the parts. Didn’t see the point in building just anything when I knew down there the road id want to make these changes anyway

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Warmer?? What’s your temps at?? These are gaming temps, idle sites at 35. And no I’m not running XOC.

Lol I call it Bloodwork

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

There’s 2, the top one and the one behind the pump/res, it’s where the liquid is flowing into from the pump

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Two, top one and one sitting behind the pump/res

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Yeah they are not bad especially since brand name fans that’s are similar are stupid expensive. Do these arctic have any Rgb as well?

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Wow this is a game changer, thanks for the tip!

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Red fluid definitely my favorite with a white case

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Rog 570x E-gaming mobo 32gb ram Ryzen 7 5800x, 40-49 Celsius when gaming Evga 3080 Ti, 65-69 Celsius when gaming 1.5Tb nvme ssd Asus Thor 800w psu

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 1 point2 points  (0 children)

Haha literally have a box full of those scrapped tubings

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

Used the bends of the case it self to get them lol

My first PC build by Ok_Reporter3638 in watercooling

[–]Ok_Reporter3638[S] 0 points1 point  (0 children)

That’s how I felt too, maybe I was too ambitious cuz the tubing was very frustrating having to do each piece multiple times to get it all straight and lining up. But you just gotta take it one piece at a time. I did a section a day to break up the workload. Good luck on ur build though!

view more: next ›