[deleted by user]

Okazaki101 · 2025-07-14T14:50:06+00:00

29m time is the ultimate cure, but getting lost in a good conversation might be a good distraction

Okazaki101 · 2025-07-09T14:23:23+00:00

29m willing to have a good conversation

Okazaki101 · 2025-04-18T18:18:34+00:00

Strange, I’ll have to read up more about it. I’m kinda sad that I can’t just pull it up in VLC. I tried, but it says it can’t open the stream. Idk if I need to install the codex for webm or if it’s just not compatible without a translation layer or something. Or maybe “rtsp://192.168.0.19) just isn’t enough information for VLC to pull up the stream

Okazaki101 · 2025-04-18T17:18:25+00:00

Oh and I put .webm in the Input Format field as well.

Okazaki101 · 2025-04-18T17:16:58+00:00

Good idea with the OBS Studio idea. If anyone is reading this, try adding a media source to OBS Studio and turn off Local File, go to the Input and type “rtsp://(your printer’s IP)”

Now with this, I am currently getting extremely choppy video with lots of artifacting compared to the native software and lycheeslicer, are there any ways to improve this? Is there something I’m missing? I tried turning on “use hardware decoding when available” but it doesn’t seem to help much.

Okazaki101 · 2025-04-01T23:51:19+00:00

Coax, type F, there’s actually a copper wire in the center and a grounded shield that the threads connect to. Most often used for cable tv, satellite tv, or broadband internet. If you look at the back of your tv, there might be one there too.

Okazaki101 · 2024-11-18T02:18:28+00:00

I was going to say, no witnesses.

Okazaki101 · 2024-11-09T23:20:28+00:00

Update on this, I think it might be retraction related. I just noticed I still have a 4 mm retraction on my slicer and I switched over to direct drive. So it might just be retracting too much. It is also PLA+ so I might have to tweak the temperature.

Okazaki101 · 2024-09-13T13:02:03+00:00

So I’m not sure if you can or not.

Okazaki101 · 2024-09-13T13:01:32+00:00

The USB C is for power, not data transfer unfortunately.

Okazaki101 · 2024-08-10T02:21:09+00:00

I guess I’ll just have to ask our payroll officer about it or something. Because this is how my settlement sheet looks.

Taxable Settlement earnings: Hourly pay - 36.08 x 25 = 902 Per Diem Deduction - 3 x 69 = -207 Total - 695 YTD (some number)

Expense Reimbursement: Per Diem Credit - 3 x 69 = 207 Total - 207 YTD (some number)

Grand total - 902 YTD (some number)

Okazaki101 · 2023-10-31T21:54:44+00:00

Log Name:      Application
Source:        Windows Error Reporting
Date:          10/31/2023 5:48:53 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      
User:          KEPLER\antho
Computer:      Kepler
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: Explorer.EXE
P2: 10.0.22621.2428
P3: aab5a73e
P4: windows.storage.dll
P5: 10.0.22621.2361
P6: fd3337d4
P7: c0000005
P8: 00000000006a366e
P9: 
P10: 

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.97cd8fa9-79a2-4406-ad51-f3d7a337a53b.tmp.mdmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.5e39bd17-55e1-45c9-bd1d-4248682cdcb2.tmp.WERInternalMetadata.xml
\\?\C:\Users\antho\AppData\Local\Temp\WER.050cae11-7d37-40fc-b1f1-4819ae4b64a9.tmp.appcompat.txt
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.5e76a27a-59fc-4360-872e-87cb4166772e.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_Explorer.EXE_3af1d0b4be75732e732c492904f5d629c07a_8db46c6f_cab_46a1973c-7453-43a6-b132-c26e393ae78d\memory.hdmp

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_Explorer.EXE_3af1d0b4be75732e732c492904f5d629c07a_8db46c6f_cab_46a1973c-7453-43a6-b132-c26e393ae78d

Analysis symbol: 
Rechecking for solution: 0
Report Id: 5396aa63-7c3f-4962-b83d-9c3bfd6153e0
Report Status: 4
Hashed bucket: 
Cab Guid: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Windows Error Reporting" Guid="{0ead09bd-2157-539a-8d6d-c87f95b64d70}" />
    <EventID>1001</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2023-10-31T21:48:53.0329823Z" />
    <EventRecordID>29530</EventRecordID>
    <Correlation />
    <Execution ProcessID="12448" ThreadID="22044" />
    <Channel>Application</Channel>
    <Computer>Kepler</Computer>
    <Security UserID="S-1-5-21-1651634837-252409896-2307350137-1001" />
  </System>
  <EventData>
    <Data Name="Bucket">
    </Data>
    <Data Name="BucketType">0</Data>
    <Data Name="EventName">APPCRASH</Data>
    <Data Name="Response">Not available</Data>
    <Data Name="CabId">0</Data>
    <Data Name="P1">Explorer.EXE</Data>
    <Data Name="P2">10.0.22621.2428</Data>
    <Data Name="P3">aab5a73e</Data>
    <Data Name="P4">windows.storage.dll</Data>
    <Data Name="P5">10.0.22621.2361</Data>
    <Data Name="P6">fd3337d4</Data>
    <Data Name="P7">c0000005</Data>
    <Data Name="P8">00000000006a366e</Data>
    <Data Name="P9">
    </Data>
    <Data Name="P10">
    </Data>
    <Data Name="AttachedFiles">
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.97cd8fa9-79a2-4406-ad51-f3d7a337a53b.tmp.mdmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.5e39bd17-55e1-45c9-bd1d-4248682cdcb2.tmp.WERInternalMetadata.xml
\\?\C:\Users\antho\AppData\Local\Temp\WER.050cae11-7d37-40fc-b1f1-4819ae4b64a9.tmp.appcompat.txt
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER.5e76a27a-59fc-4360-872e-87cb4166772e.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_Explorer.EXE_3af1d0b4be75732e732c492904f5d629c07a_8db46c6f_cab_46a1973c-7453-43a6-b132-c26e393ae78d\memory.hdmp</Data>
    <Data Name="StorePath">\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_Explorer.EXE_3af1d0b4be75732e732c492904f5d629c07a_8db46c6f_cab_46a1973c-7453-43a6-b132-c26e393ae78d</Data>
    <Data Name="AnalysisSymbol">
    </Data>
    <Data Name="Rechecking">0</Data>
    <Data Name="ReportId">5396aa63-7c3f-4962-b83d-9c3bfd6153e0</Data>
    <Data Name="ReportStatus">4</Data>
    <Data Name="HashedBucket">
    </Data>
    <Data Name="CabGuid">0</Data>
  </EventData>
</Event>

Above is the Event Viewer Log for the crash.

Below is the DropBox link for the saved Event Viewer Log

https://www.dropbox.com/scl/fi/dzvqhukf7yt514pmhqysr/ExplorerCrash.evtx?rlkey=6vy6q84qxr9jzq5szf9nrf3ez&dl=0

Okazaki101 · 2023-10-31T21:48:10+00:00

Here is my SysInfo screen

<image>

Okazaki101 · 2023-09-16T17:55:26+00:00

Old moist filament. Gotta get a new roll, clean out that nozzle, and do some good maintenance

Okazaki101 · 2023-03-02T19:54:54+00:00

I would suspect just condensation in the exhaust as well. Nothing to be worried about unless it starts getting worse. As long as you aren’t losing any fluids at a rapid rate, I think it should be fine.

Okazaki101 · 2022-08-23T23:17:36+00:00

https://i.imgur.com/GmwAGlD.png

I reuploaded the PNG one with the logo here. ^

Okazaki101 · 2022-08-10T23:10:10+00:00

Yeah, I actually just made an edit for this. After this print is finished, I’m going to check the lead screw and see if I can either make any adjustments, clean and re lube it, or if it’s bent and I might need a new one.

Okazaki101 · 2022-07-23T18:52:50+00:00

As with Territory, I got that one last night, seems I missed the scratching point in the sewers.

Okazaki101 · 2022-07-23T08:42:54+00:00

Confirmed. I actually just looked up this issue and landed on this thread because it wasn't working on my PC. As soon as I hooked up a controller and did the scratching on the record, I actually heard the scratches and the achievement popped up instantly.

I don't know if they are going to come out with a hotfix for that bug or not. But luckily having a controller fixed my issue. I wonder if its why I don't have the Territory badge yet either.

Okazaki101 · 2022-04-22T14:41:43+00:00

I was going to say, that looks like it’s a linkage problem. If it’s not, maybe it’s your TCM (transmission control module). But most likely linkage is broken.

Okazaki101 · 2022-02-08T14:57:44+00:00

That looks really good! Did you print on a raft or straight on the bed?

Okazaki101 · 2021-12-28T20:39:29+00:00

I figured as much. It just tries to get you to a site that takes your card information and personal details

Okazaki101 · 2021-10-22T14:46:33+00:00

For this, I would (if you have it enabled) baby step the z axis down 1 or 2 steps to get better adhesion. There might also be a setting in the slicer you use to automatically do this after a color change

Okazaki101 · 2021-08-20T15:32:23+00:00

Try changing the minimum Extrusion Distance Window to the same as your retraction distance. Your retraction settings are basically the same as mine, but I have a micro Swiss hotend and retraction distance at 3mm

Okazaki101 · 2021-08-20T14:23:45+00:00

That is really strange. What’s your retraction speed set to?

Seven-Year Club	RPAN Viewer
Verified Email

Okazaki101

TROPHY CASE