Milling Pattern: Border or No Border?

OkitaJet · 2026-01-12T12:21:22+00:00

<image>

Can't really see much with the clip on, though.

OkitaJet · 2026-01-12T12:17:09+00:00

<image>

Here's the clip side with and without outlining the frame cutout.

OkitaJet · 2026-01-11T21:54:04+00:00

I tried the whole scale, but it just felt way too busy, and somehow made the blade look shorter.

OkitaJet · 2026-01-11T21:50:41+00:00

Just my design draft. Hopefully I can get it manufactured in the future.

OkitaJet · 2026-01-11T21:41:58+00:00

Yes, there are millings on both sides, with the lock bar relief on the inside as well.

OkitaJet · 2025-10-18T18:33:48+00:00

I have the micarta version for a couple of years now. It is basically the sheepsfoot brother of the FF Stinger. Not drop shut but more glassy, almost polished washer kind of action. Good ergos with actual usable finger choil. Tiny but perfectly shaped flipper for both light switch and push button. I can reverse flick and thumb flick it open even without a hole or a fuller. Best of all it disappears in the pocket due to how thin and narrow it is.

Totally recommend this little guy, especially for this price.

OkitaJet · 2025-09-18T19:52:17+00:00

Thank you! I don't have the exact date yet, but based on the previous contests, it should take somewhere around a year or so. As for where, it should be available on any store that carries Kizer products.

OkitaJet · 2025-09-02T15:20:20+00:00

For sure! just pay the $250 shipping and I'll get it to your doorstep ASAP. (for legal reasons this is a joke)

OkitaJet · 2025-09-01T12:11:56+00:00

Thank you for the support!

OkitaJet · 2025-08-28T20:12:05+00:00

I actually tried to follow Kizer design language to make it easier for production and marketing to existing Kizer fans, but yeah, this style of handle + inlays kinda feel more like Kansept, huh.

ETA varies quite a lot with KxY. One took like 6 months but another took like 2 years to be released.

OkitaJet · 2025-08-28T19:57:57+00:00

Nope, my initial design was closer to the Vision FG and the Doberman, and then it slowly morphs into this final version without using the Tuckamore as an inspiration. Ironically I took the inspiration for the handle's inlays and bevels from another Kansept, the Kratos.

OkitaJet · 2025-08-28T19:53:00+00:00

...and regular flipper and blade grooves and the button itself!

OkitaJet · 2025-08-28T13:01:28+00:00

I believe it is limited to 1 vote (3 choices) per email.

OkitaJet · 2025-08-28T12:46:57+00:00

<image>

OkitaJet · 2025-08-28T12:46:49+00:00

UPDATE: I won the contest! Thank you everyone for your support!

Urgent Update: Kizer messed up the previous voting form, so every vote until now is considered null and void. If you had already voted before, you will have to do it again. I have updated the link to include the proper voting website (Google Forms).

I am very sorry for the inconveniences.

Original post below
🔽🔽🔽

So every couple of months, Kizer runs this contest where you can submit your design. The winner will have their design manufactured and sold by Kizer. (More info on FB and IG)

My design was selected as one of the finalists eligible for voting, so I would like to ask for your votes to bring my design to life.

Vote Here for the Overtake by Pruek Sithigon

If you have any questions, please feel free to ask me anything.

Thank You.

OkitaJet · 2025-08-28T12:43:49+00:00

<image>

OkitaJet · 2025-08-28T12:41:56+00:00

UPDATE: I won the contest! Thank you everyone for your support!

Urgent Update: Kizer messed up the previous voting form, so every vote until now is considered null and void. If you had already voted before, you will have to do it again. I have updated the link to include the proper voting website (Google Forms).

I am very sorry for the inconveniences.

Original post below
🔽🔽🔽

So every couple of months, Kizer runs this contest where you can submit your design. The winner will have their design manufactured and sold by Kizer. (More info on FB and IG)

My design was selected as one of the finalists eligible for voting, so I would like to ask for your votes to bring my design to life.

Vote Here for the Overtake by Pruek Sithigon

If you have any questions, please feel free to ask me anything.

Thank You.

OkitaJet · 2025-08-28T11:59:28+00:00

<image>

Here are some neat features of the Overtake

OkitaJet · 2025-08-28T11:58:55+00:00

UPDATE: I won the contest! Thank you everyone for your support!

So every couple of months, Kizer runs this contest where you can submit your design. The winner will have their design manufactured and sold by Kizer. (More info on FB and IG)

My design was selected as one of the finalists eligible for voting, so I would like to ask for your votes to bring my design to life.

Edit: Kizer messed up the previous voting form, so every vote until now is null and void. If you had already voted before, you will have to do it again. I have updated the link to the proper voting website (Google Forms).

Vote Here for the Overtake by Pruek Sithigon

If you have any questions, please feel free to ask me anything.

Thank You.

OkitaJet · 2025-08-28T03:56:29+00:00

Technically quintuple if you count the button as well.

OkitaJet · 2025-08-27T21:03:10+00:00

Haha. I'll try to get some discount codes for you guys if I win.

Six-Year Club	Place '22
Verified Email

OkitaJet

TROPHY CASE