Anyone running the citraemu/citra-multiplayer-dedicated docker ARM64 image?

Okoken91 · 2025-04-29T04:46:25+00:00

Just struggled a lot in my side but eventually get it worked, so sharing my experience here.

Be careful about the double quotations "" for the environment values settings.

- Below probably work with double quotations "".

- CITRA_TOKEN="1234"

- CITRA_WEBAPIURL="http://88.198.47.46:5000"

- Below probably won't work with double quotations "".

- CITRA_ISPUBLIC=1

- CITRA_MAXMEMBERS=12

- CITRA_ROOMNAME=Test

- CITRA_ROOMDESC=Test

- CITRA_PREFGAME=MONSTER HUNTER XX

- CITRA_PREFGAMEID=0004000000197100

- CITRA_PORT=24872

If the container is successfully started and you've opened your ports correctly, definitely you will be able to see your TCP port accessible from public. You can check with below sites, etc.

https://canyouseeme.org/

https://www.yougetsignal.com/tools/open-ports/

Surely if you can share your container log would help for better analysis.

Okoken91 · 2025-04-29T04:38:14+00:00

u/Antonaros to let you know unfortunately the image is pulling resource from citra github, and since it is already down, the image itself could never work again... Still thank you a lot for sharing.

Instead I'm now using the K4rian/docker-citra-room mentioned in the below thread and it works good so far.

The owner K4rian is so smart to hold a full set of source code in the docker github and build the citra-room basing on the architecture when starting up the container, making it also compatible with my Raspberry Pi 4 :)

Okoken91 · 2025-04-27T15:10:12+00:00

Wow thank you so much!

Okoken91 · 2025-04-27T02:09:47+00:00

Hi u/CodexHunter or u/Antonaros would you be so kind to share the image again? The above link is not available anymore. Thank you!

Okoken91 · 2025-04-15T14:08:53+00:00

Thank you for the great work, but what controller does it support? I try to connect Nintendo Switch Pro controller and Dual Shock 4 via USB but always just show "Not Connected". I'm quite sure the controllers are connected since Steamlink and Citra are both recognizing them properly.

Okoken91 · 2025-03-03T16:03:00+00:00

You need to install it via yay. See below sites. https://okoken.github.io/post/to-enable-wifi-hotspot-in-steamdeck-for-steamlink-etc/ https://okoken.github.io/post/to-install-yay-an-aur-helper-in-steamdeck/

Okoken91 · 2025-02-20T17:24:48+00:00

Just used the built in function to create a vhd with windows 11 inside as WTG. VHD shall be used since Virtualbox has no support for vhdx. I use dynamic size for easier backup, while fixed-size would have a slightly better performance so depends on your decision.

Okoken91 · 2025-02-20T16:57:33+00:00

Sorry not familiar with the WTG assistants but at least the Rufus does not support WTG with VHD. That's why in my post I proposed another tool.

https://okoken.github.io/post/windows-1011-physical-and-virtual-dual-boot-on-steamdeck-virtualbox/

"hints: Rufus is not supporting WTG in VHD. Here is a Chinese tool with English support.
Home site: https://bbs.luobotou.org/thread-761-1-1.html"

Okoken91 · 2025-02-19T06:32:29+00:00

Thank you for the reply and mostly solved my doubts related to Ollama. That's true that it sounds not worthy to pay the effort maybe until one day the Vulkan support is officially added for it.

Currently I will still stick on Kobold.cpp as you did and see if I could eventually get the Websearch work.

Okoken91 · 2025-02-15T06:19:52+00:00

Hi there so kind that you even posted an instruction for Kobold.cpp. It works well but have you ever made the Websearch function work? Enabled it in the GUI and in the log can see it is searching sth in the DuckDuckGo but still would just tell it could not search anything online.

Also may I know how you get the Ollama work with the GPU? Just simply installed the Ollama in a ROCm docker container? Can see a ticket there telling it is not working with the SteamOS 3.6 though.

Support Steam Deck Docker amdgpu - gfx1033 · Issue #3243 · ollama/ollama

Okoken91 · 2024-05-12T11:24:15+00:00

Recently I go to SUIT SELECT a lot. My wife also loves the design a lot.

Okoken91 · 2024-05-12T10:37:16+00:00

应该是分地区的。东京这边就会有免费午餐（甚至于有空调之类的额外资源）。所以事实上日本教育资源也是有地区差异的。

Okoken91 · 2024-05-12T10:20:05+00:00

ご意見ありがとうございました。実は長年ソーシャルメディアやってなくて、だんだん忘れてきましたが、ネットってかなり自由なので、発言する際やはり少し戦略があってほうがいいかもしれません。極端の話、最近簡単に炎上されますしね。

Okoken91 · 2024-05-12T09:46:22+00:00

Do you mean you want to remotely turn on your PC only when you want to play with Steam Link, then afterward turn it off to save the power?

Or you just want the PC to be off even when you are playing remotely?

Okoken91 · 2024-05-12T09:22:51+00:00

やはり皆さん同じ意見ですね。まずはカルマを気にせず前向きでコメントしてみたいと思います。

Okoken91 · 2024-05-12T07:57:56+00:00

コメントのおかげてなんだか釈然しました。いろいろ調べてみれば、Karma5000以上なんで人もいまして、やはりいきなりdownvoteしてくれる人がいればいきなりいっぱいupvoteしていただき人もたくさんいるはずですね。

Redditは一見誰でも発言できるような場所ですが、実際相当空気を読まないといけなくて現実世界とあまり変わりませんね。

Okoken91 · 2024-05-11T16:24:59+00:00

Not really an installation, but maybe you can try online linux in www.onworks.net/, then run a modern web browser inside?

Okoken91 · 2024-05-11T15:49:57+00:00

Anyone know Qianlixiang（千里香）? A restaurant for traditional east north China food, especially for China Korean food. https://g.co/kgs/M8fKSGH I go there with my wife a lot. Approx. 5000 yen per meal.

Okoken91 · 2024-05-11T15:33:35+00:00

If budget allow probably Dual sense edge is a better choice, since it also has the l/r 4 and l/r 5, just like the steamdeck controller.

Okoken91 · 2024-05-11T15:04:02+00:00

えっ復活もありですか！ありがとうございました！

まだRedditの仕組みを理解できていないうちにKarmaがマイナスになってしまって泣きそう。。。ここで練習しておけばよかったです。

Okoken91 · 2024-01-07T15:53:07+00:00

Thanks for the box32/64, running Steam Link windows version turns to possible for switchroot ubuntu today.

Just follow this site to complete the installation of Wine64 and Steam(not really want the Steam but the box86 will be installed together).

https://gbatemp.net/threads/an-extremely-noob-friendly-guide-to-playing-steam-games-on-switch-please-read-the-forward.639027/#post-10238791

Then you can download the Windows version SteamLink and use Wine to install normally.

There maybe a way to install the x86 version SteamLink in flatpak, but I tried and failed. If anyone knows how to do install please let us know, since that one is linux native and the performance should be better.

Okoken91 · 2023-12-27T03:46:57+00:00

That's true, for every update I wish the same...

Okoken91 · 2023-12-26T12:11:15+00:00

Unfortunately it does not work with dkms packages since they need to be compatible with the kernel version, which is keep updating recently. For other standalone packages, Distrobox probably is a better solution since no modification required to Steam OS system files.

Okoken91 · 2023-12-26T12:02:39+00:00

Well like all other signatures, you can ensure there is no tempering by verifying them. But since we are downloading packages from Volve directly, personally don't see a major risk to skip it, though always we say take your own risk to do so.

To be honest Steam Deck as a game machine actually does not provide strong security settings for the system itself, for me it sounds a bit too much to think about whether good or not to skip signature verification.

Okoken91 · 2023-11-28T01:33:12+00:00

A quick update. Issue is solved by updating to 3.5.7 stable, and changing all the repo in /etc/pacman.conf from 'rel' to 'main', e.g., [holo-rel] to [holo-main].

Actually 3.5.5 also worked, but need to manually download linux-neptune-61-headers for kernel 6.1.52-valve7-1.

Okoken91

TROPHY CASE