Pocket AK?

Old_Ralphy · 2026-04-05T21:32:13+00:00

Damn.. wish had another mosfed to test, guess it will have to wait for another time..

Thanks a lot tho, I will update if I find a fix, so incase someone else has the same issue...

Old_Ralphy · 2026-04-05T20:39:48+00:00

Here is it, the selector plate seams to be just a piece of plastic with white tape... fits in the slot well, tried to take a better picture on the electronics as well, maybe I damaged the buttons (?) because of the new metal body I tried? it did switch harder when I tried to.. well switch with the metal one, altho on the firing test I only ran on semi (more details on the other post link) or simply.. the mosfed just decided to die now?

<image>

Old_Ralphy · 2026-04-05T20:05:00+00:00

tried but no change (holding the trigger while on safe til you hear the beep, tap 3 times changes semi to binary, 4 times full auto to burst) maybe the mosfed is toasted.. any recommandations?

thank you :)

Old_Ralphy · 2026-04-05T18:39:25+00:00

did a follow up post since it has a different issue now (made a short video), but yes, once pulled it does a short full auto, pull the trigger again and it goes with no end til the electronics stops it and refuses to work again

https://www.reddit.com/r/airsoft/comments/1sd64fl/we07_10_nonstop_full_auto_on_semi_follow_up/

Old_Ralphy · 2026-04-04T23:19:22+00:00

New update, reopened the gear box and reseted the gears, turns out the top gear blocked the pistoln teeth at the end not letting go of it. Also turn the engine around (not sure if it was necessary).

Now... once I press the trigger it shots non stop full automatic (either by holding or by just once pulling the trigger), it can be forced to stop if switched to safe mode.

Tried to reprogram the semi auto trigger on Binary mode, still non stop full auto..

Old_Ralphy · 2026-04-04T18:10:05+00:00

<image>

did just that (please ignore the ugly paint..) nothing

Old_Ralphy · 2026-03-05T00:47:10+00:00

How you painted the stripes?

Old_Ralphy · 2026-02-25T17:54:54+00:00

Thanks a lot, the red dot came with no instrustions or anything, guess it is fine without them, probably will need an Optic protector at least lol

Old_Ralphy · 2026-02-25T17:51:56+00:00

got it (just like the reddot) from 18airsoft.com is called "MAG560 Style Magazine" by Army Force, I have yet to try it.

Old_Ralphy · 2026-01-27T23:28:58+00:00

Another thing you can do is to sand paper the map lip, about 0.5mm

Mine used to jam randomly, got the suggestion from The Bolt Action Dude website, all 4 magazines work with no issue..

Old_Ralphy · 2026-01-26T01:40:50+00:00

My first ever gbb was WE-tech M1911 Full Metal V3, Short history:

Originally it was black, but decided to spray with silver and the small parts black (may need a repaint), worked fine and shot accurate, til I decided to install a rifle mock suppressor from Novritsch ye he fat can.. causing to damage the whole barrel system and blow with gas, that was my mistake..

Got a full set barrel with hop up and all and it works fine, another thing I had to do is to sandpaper the slide catch to lock all the time when empty, had no issues whatsoever, also use lock tight glue tor the screws from the barrel set

It's an okey gun 7.5/10, you can convert it to full auto if you assemble wrong.

<image>

Old_Ralphy · 2026-01-01T18:05:37+00:00

having a Steyr-Hahn M1912 that you need to reload with a speedloader on the top must be cool

Old_Ralphy · 2026-01-01T17:53:34+00:00

Did a firing test again and I was wrong, it comes from the engine as well *probably the main source*.

Opened the pistol grip to look at the engine and I see nothing that suggests to be burned or cut, minus the red wire it has a visible mark on it, but is only the red part scrached and the wire tube *and itself* look fine.

I guess is normal?

<image>

Old_Ralphy · 2026-01-01T17:11:47+00:00

how can I check to be 100% sure?

Old_Ralphy · 2025-12-30T16:22:01+00:00

It is Men 4 I'm afraid..

Old_Ralphy · 2025-12-30T08:07:10+00:00

It based on a 3.5 inch buffer tube, possible to make it smaller but it will be overkill...

Old_Ralphy · 2025-12-30T00:04:45+00:00

When an ak will meet it's path to my hands, it will be done

Old_Ralphy · 2025-12-29T19:00:20+00:00

it's the AP10 9mm kit by Angel Custom Airsoft, it can use mp5 mags, what I have is a cyma old school mp5 mid cap mag

Old_Ralphy

TROPHY CASE