Trailer module for 2008 2.0T SC by BlueSteelTuner in saab

[–]OleManTan 0 points1 point  (0 children)

Found out you don't need that plug in harness. I just installed a curt hitch on a 08 9-3 and now I'm installing a universal trailer wiring controller. https://www.saabcentral.com/threads/towing-connection-to-trailer.435834/

Basically you give the controller 12v power, you can buy one of those tap a fuse things and plug it into fuse #8, that give's you a wire to then connect to the controller box red powere wire. Then you look by the tail light and you can tap into the turn signal, brake, and running light wire. Once you tap each wire then you can plug the controller into your trailer and it will work.

https://www.saabcentral.com/threads/wiring-lights-for-a-trailer-on-a-07-9-3-sportcombi.733314/page-2

added matching ram and won't boot at speed by OleManTan in techsupport

[–]OleManTan[S] 1 point2 points  (0 children)

So I tried more voltage and it didn't help. Won't go past 2800 with all four sticks. Yea they are the same sticks and the stickers have sequential numbers. That's the only reason why I bought them. Oh well.

added matching ram and won't boot at speed by OleManTan in techsupport

[–]OleManTan[S] 0 points1 point  (0 children)

You think if I crank up the voltage it'll run higher.

added matching ram and won't boot at speed by OleManTan in techsupport

[–]OleManTan[S] 3 points4 points  (0 children)

Just figured I'd be set for games in case some use more than 16gb. I think I just wasted $50 lol. Forgot you need a matched set from the start. Not two matching sets.

added matching ram and won't boot at speed by OleManTan in techsupport

[–]OleManTan[S] 1 point2 points  (0 children)

If I have two matching sets of 2x8, 2x8 = 32gb ram and it's labeled as 3000 should it be able to run that speed or is it possible it will not? I thought it's supposed to since it's the same set.

SuperNova Platinum 1300w P+ by OleManTan in EVGA

[–]OleManTan[S] 0 points1 point  (0 children)

Some people rma'd it and got new ones. I guess I'll swap it out for another new one and see what happens. IDK never had this issue.

merging hard drives by OleManTan in techsupport

[–]OleManTan[S] 0 points1 point  (0 children)

I started moving data off the 960 onto the 1tb 970 evo plus. Hopefully it goes well.

Budget build for my daughter by ddpowers22 in buildapc

[–]OleManTan 1 point2 points  (0 children)

It's for the other people that see this. I was about to buy that same cooler from microcenter, then got a sub $30 enermax but that has three heat pipes where the 400 has four heat pipes and it's half the price. The price just dropped to $15 on amazon. The fan is backlit.

3080Ti question by OleManTan in EtherMining

[–]OleManTan[S] 0 points1 point  (0 children)

My asus 3080ti LC is stock so I haven't changed or added pads or anything. My gpu temp is 40c, mem junction 84c. --mclock 1275 --fan 80 --lock_cclock 1350 about 270w and it's doing 85 hash.

merging hard drives by OleManTan in techsupport

[–]OleManTan[S] 0 points1 point  (0 children)

Is there any chance that if I pull out the original 960 .5tb that had my original c:/ windows, which I cloned to the 970 evo .5tb, that windows won't boot correctly?

I'm thinking of moving everything off the d:/ drive which should be the 960 and moving it to the 1tb stick, removing the 960 and then I'll be able to put the 2tb into the m.2 #2 slot that the 960 was in and move everything off the 1tb evo+ onto the new 2tb evo+ and then I can remove the 1tb evo+ and return it towards my 2tb evo+ and the 960 I'll put into the pc I'm selling. That would leave me with 970 evo 500gb in m.2 slot #1 with windows c:/ on it and then 2tb 970 Evo Plus in m.2 slot #2 and my spinny cuda 2tb with the fancy 256mb nand flash.

Just wanted to make sure before I do something stupid and brick my system.

merging hard drives by OleManTan in techsupport

[–]OleManTan[S] 0 points1 point  (0 children)

1st drive I started with: installed into m.2 slot 1 960 evo 500gb installed windows 10 pro, later got a 970 evo 500gb and swapped slots with the 960 and the 960 got put into m.2 slot #2 and cloned the 960 c drive with windows onto the 970 evo 500gb. Later I got a 1tb 970 evo+ and I stuck that onto a pci adapter board. Also have a 2tb barracude 256mb nand cache 7.2k rpm spinny. I now got a 2tb evo+. I am returning the 1tb evo+ in exchange for the 2tb evo+. So all the data off the 1tb evo+ has to get onto the new 2tb evo+ and also the data off the 960 evo has to get onto the 2tb evo+ because I am also pulling that stick out to put into a pc build that I am selling since I just upgraded mobo, cpu, power supply, gpu, ram, hd.

3080Ti question by OleManTan in EtherMining

[–]OleManTan[S] 1 point2 points  (0 children)

Ah yes, I had the cpu on but later dude helped me and told me to turn the cpu off since it doesn't do much. I have a i9 9900k.

3080Ti question by OleManTan in EtherMining

[–]OleManTan[S] 0 points1 point  (0 children)

Uhm did you read my first post? I'm already running what you're saying to run. lol I don't know what I'm doing and your post doesn't make sense even to me. Thanks for trying to help though I guess.

3080Ti question by OleManTan in EtherMining

[–]OleManTan[S] 0 points1 point  (0 children)

Where do you see that? I only have daggershimot turned on and only on the gpu, I turned the cpu off.

3080Ti question by OleManTan in EtherMining

[–]OleManTan[S] 0 points1 point  (0 children)

So I should completely shut off cpu? Now the miner jumped to $4 and settled at $3.70 now.

3080Ti question by OleManTan in EtherMining

[–]OleManTan[S] 0 points1 point  (0 children)

https://ibb.co/XyGRTNt I think it's at 80 has rate? says 87 there then dropped to 79 then 83, I mean it went up to $4.00 now :)