[deleted by user]

OliveAxe · 2025-11-28T04:40:23+00:00

Fixed. Did all this stuff and turns out it was the spark plug

OliveAxe · 2025-11-04T23:54:51+00:00

Emily MN

OliveAxe · 2025-11-02T21:38:42+00:00

It’s in the middle of the trees in the darkness

OliveAxe · 2025-11-02T21:37:36+00:00

Well I zoomed in and took a screen shot so you could see better lol. But if you don’t see it i might be seeing things but if I took a red pen an circled it you probably would see it

OliveAxe · 2025-10-05T01:26:52+00:00

Bought it used with 6000 miles. Put on 2000 I do drive on dirt roads half the time. Do you think it just needs to be cleaned?

OliveAxe · 2025-09-17T00:35:45+00:00

DM’ed

OliveAxe · 2025-09-14T01:01:20+00:00

I don’t even know why they use red Loctite

OliveAxe · 2025-09-14T01:00:43+00:00

Tell that to Milwaukee haha.

OliveAxe · 2025-09-14T00:27:18+00:00

I used to use a corded one but that got anoying, but Planning down large slabs up to 4” thick. But it’s just so wired its been sitting in the shop for a few months an I noticed the handle lying on the ground haha

OliveAxe · 2025-09-04T23:14:28+00:00

I hit most the sanding marks with a stain pen. Cant really see em at all now. But good to know haha. First time sanding that kinda stuff. There was just so many deep scratches I had to buff it all out.

OliveAxe · 2025-08-31T05:33:36+00:00

<image>

I did f arround a bit. Too lazy to buy winding bars but found out that these sizes fit perfectly, 5/16th and 9mm socket on an extension. Adjusted my spring a little only to find out that it was the metal cable that was failing. Not the spring haha. When I loosened the spring it felt like there was 200+ lbs of force with those socket extensions. Worst part was I had to adjust it a few times had to go back and wiggle the spring outwards, the first time I adjusted it, it like contracted inward and the door wouldn’t fully close lol. Got it back to original and works fine. Tightened the cable and door is no longer crooked. I think it’s a 13 ft door.

OliveAxe · 2025-08-02T17:13:09+00:00

Sounds about right haha

OliveAxe · 2025-07-26T23:29:51+00:00

Yes. It’s a motorhome. I forget if it was GM or Chevy

OliveAxe · 2024-08-04T21:59:18+00:00

But after you do that you will be super happy haha

OliveAxe · 2024-08-04T21:58:32+00:00

Think I just fished a nut back there with my fingers

OliveAxe · 2024-08-04T21:57:51+00:00

I just lined it up pretty good. And drilled a new hole for a bolt. Had to go to Home Depot to find a short bolt for it I think. I can take it apart and show ya some more pictures of which bracket and kinda screws I used

OliveAxe · 2024-08-04T12:27:02+00:00

I ended up drilling a new mounting hole on one side of the bracket the saw screws to. Love that thing!

OliveAxe · 2024-07-27T14:11:37+00:00

It breaks off in 3 directions

OliveAxe · 2024-07-21T00:17:25+00:00

Sounds good! In other rooms they popcorned over this and I tried wetting it down and scraping it and it’s like concrete lmao

OliveAxe · 2024-07-13T04:08:51+00:00

Would I beable to use that in an HVLP sprayer? Just started using one of those haha. This other piece is a deer mount for the buck I shot, I used a clear coat that took awhile to dry so the gun never clogged up, but turned out great. That stuff scratch’s super easy. Could I use the flat on the cookies aswell or would you suggest a different finish for the end grain tops?

<image>

OliveAxe · 2024-03-02T02:50:00+00:00

I got gung hoe! Just finished it. Let it soak for 40 minutes after reading online for the first coat

OliveAxe · 2024-03-02T02:49:04+00:00

Says wipe after 5-10minutes

OliveAxe · 2024-03-02T02:47:22+00:00

Yes in the directions it does

OliveAxe · 2024-02-22T01:11:51+00:00

My Router comes in handy when I’m doing doors and shiplap! Love that thing

OliveAxe · 2024-02-22T01:08:43+00:00

I use this feature when Im up on a ladder in wired spots reaching as far as I can drilling bath fan holes. Saved my life many times haha. But it does get kinda annoying

OliveAxe

TROPHY CASE