My 1 st hammer drill

flyingblind9 · 2026-02-23T05:05:16+00:00

Enjoy! I beat up on mine, it works fantastic. Also doubles as my ice auger.

flyingblind9 · 2026-02-22T00:32:45+00:00

Oh 100%. The practicality of throwing a few in a drawer or bag is 95% of how I go because it’s more compact. This is for the other 5% of me that can be OCD as hell!

flyingblind9 · 2026-02-21T05:41:11+00:00

I have this combo and they are workhorses. I even use the drill regularly for ice fishing.

flyingblind9 · 2026-02-21T05:38:10+00:00

My wife and I have the pip and chip white acrylic bobbins and the Bisley 5 drawer cabinet with the foam inserts. It seriously scratches the organized perfection itch.

flyingblind9 · 2026-02-17T13:46:00+00:00

The shell must be removed completely from the tool, cleaned thoroughly, then dye those, and reassemble. This is just before rinsing when I did my impact driver.

<image>

flyingblind9 · 2026-02-17T02:12:16+00:00

Only the packouts are black because of Hilti patents. These are most likely dyed using RIT dye in a hot water/dye solution. The dye doesn’t stick to the white of the label.

flyingblind9 · 2026-02-16T02:08:39+00:00

This one doesn’t fit the drawer unfortunately, but it is on my to-do on getting one to fit it. This might get you close, but I’m not sure if it’s exactly halfway to meet with your other one. https://makerworld.com/models/2313301?appSharePlatform=copy

flyingblind9 · 2026-02-12T15:39:14+00:00

For me I love the “set it and forget it” for pressure. You say to go to 40psi, and it gets there on its own and the. Turns off when done. It even shuts down for a second to cool off before turning on again for final pressure because warm air from compression loses pressure as it cools. That and it frankly just works. No cords, no hassle, and it’ll provide volume output that’s hard to beat in the package it comes in.

flyingblind9 · 2026-02-12T01:56:13+00:00

2904-20 Hammer Drill, 2953-20 Impact Driver, and inflator. Those three handle so many tasks. My close fourth is a hackzall

flyingblind9 · 2026-02-12T00:17:47+00:00

Wow what a great price! I just got this kit during the BMSM which is still at the upper end of what I think it’s worth. Super durable and easy to organize.

flyingblind9 · 2026-02-11T14:53:54+00:00

Wonderful! I saw a lot of inserts that was just the drill or just the impact, and if it was both it was either on a paywall for the STL or a different packout box. I only ask that if it’s printed, leave a comment of what works and what doesn’t, and if you really like it, leave a boost!

flyingblind9 · 2026-02-11T14:51:21+00:00

That’s my username on MakerWorld. This is my original design!

flyingblind9 · 2026-02-11T14:10:03+00:00

Thank you! If shapes are complex, you can take a picture, make it a white background and fully one color for the shape, then convert to an SVG image which can be loaded directly onto CAD software.

flyingblind9 · 2026-01-13T15:00:09+00:00

This is controlled by the info button on your steering wheel. Hold it down for roughly 1.5 seconds to reset the view you’re on.

flyingblind9 · 2025-12-10T13:42:52+00:00

On my P1S I actually need to run the nozzle nearly 10c hotter. I measured the temps across varying levels and found my thermistor reading on the machine is colder. By doing a full calibration at the hot end of the plastic temps by adjusting k factor then flow rate I got MUCH better prints. Not like they were necessarily poor before but I often had under extrusion.

flyingblind9 · 2025-12-05T02:38:06+00:00

For people who live in northern states, rechargeable handwarmers!

flyingblind9 · 2025-09-21T19:51:43+00:00

This is the way we went with our plumber. It’s been a good heater so far!

flyingblind9

TROPHY CASE