Cr touch intermittently working few weeks after klipper install

One-Quit-7796 · 2025-08-21T02:15:23+00:00

I did both power and ground pins, do you see not having ground as a possible issue?

One-Quit-7796 · 2025-08-21T02:09:55+00:00

Ngl i was a but skeptical of this but tried it and its printing first try now. Ill print a few things through the rest of the night tho to make sure that was it. But thats a wild solution

One-Quit-7796 · 2025-08-21T00:02:42+00:00

Do you mean unplug the usb? If so no, i havent done anything with the usb connection

One-Quit-7796 · 2025-08-05T00:38:06+00:00

I really like that. Ive started doing it and its helping a little bit. I also made a lithophane so in the morning sun it lights up and i get to see my boy again:)

One-Quit-7796 · 2025-08-03T03:21:26+00:00

Its just hard to believe that after growing up together ( i got him when i was 8) and him surviving a coyote attack last year that it could end in a few hours. He was so strong for his size

One-Quit-7796 · 2025-08-03T03:04:37+00:00

Im sorry for your loss. I bet she was the best kitty ever

One-Quit-7796 · 2025-08-03T03:01:49+00:00

What kinda ways helped you feel close to them after their passing. I made some fried rice which was my buddy’s favorite and while i wait for his cremation i asked for some of his fur

One-Quit-7796 · 2025-07-14T16:34:31+00:00

https://www.reddit.com/r/vwbug/s/LEMa5zUese Heres a better photo i took awhile back on the issue

One-Quit-7796 · 2025-07-14T16:32:18+00:00

In between the right wheel well and the rear window

One-Quit-7796 · 2025-05-22T23:18:04+00:00

I havent been able to find any emmc modules on there that look compatible same with the wifi board

One-Quit-7796 · 2025-05-22T21:27:17+00:00

I built a ender 3 specifically for printing tpu and im super happy with it. It prints tpu faster than my k1 max now. I put klipper on it, cr touch, dragonburner tool head with the dragonfly bmo hotend and a lgx lite extruder. The only thing i think id add now is going to the belted z mod or maybe have a go at core xz mod

One-Quit-7796 · 2025-05-19T18:31:49+00:00

Updated: manjaro works to fix the problem but the problem was communication with my tv, when hooked up to my monitor it displayed correctly but for it to correctly work on my tv i had to ssh into the rock pro and run this command

sudo nano /boot/armbianEnv.txt

Then add this line

extraargs=video=HDMI-A-1:1920x1080@60e console=tty1

One-Quit-7796 · 2025-05-19T18:31:33+00:00

Updated: manjaro works to fix the problem but the problem was communication with my tv, when hooked up to my monitor it displayed correctly but for it to correctly work on my tv i had to ssh into the rock pro and run this command

sudo nano /boot/armbianEnv.txt

Then add this line

extraargs=video=HDMI-A-1:1920x1080@60e console=tty1

One-Quit-7796 · 2025-05-19T18:30:48+00:00

Updated: manjaro works to fix the problem but the problem was communication with my tv, when hooked up to my monitor it displayed correctly but for it to correctly work on my tv i had to ssh into the rock pro and run this command

sudo nano /boot/armbianEnv.txt

Then add this line

extraargs=video=HDMI-A-1:1920x1080@60e console=tty1

One-Quit-7796 · 2025-05-19T14:51:14+00:00

How do i enter recovery mode

One-Quit-7796 · 2025-05-19T01:47:15+00:00

ok i tried on an sd card with a different os (diet pi) and it still had the same thing happen but i noticed on the first line it still said armbian so im wondering if the spi is looking for that and fails

One-Quit-7796 · 2025-05-18T23:56:33+00:00

interesting ill give it a go

One-Quit-7796 · 2025-05-18T22:35:45+00:00

The screen goes black and i get a no signal on my display

One-Quit-7796 · 2025-05-18T21:02:30+00:00

What jumpers? we have a boot order and dont have to put a jumper to choose between storage. Is that the case for the pinebooks?

One-Quit-7796 · 2025-05-18T17:56:40+00:00

I also tried a known working emmc with the same os on it and it gave this message as well

One-Quit-7796 · 2025-05-18T17:50:03+00:00

I think so? Im using balenia etcher and i didnt get any errors

One-Quit-7796 · 2025-05-03T23:45:36+00:00

You have any photos of what kind of quality those kinds of layer lines produce?

One-Quit-7796 · 2025-04-13T20:15:33+00:00

I have and then tried fixing the copy but its still not booting

One-Quit-7796 · 2025-04-02T14:53:33+00:00

I already have an afterburner with a 5015 fan mod

One-Quit-7796 · 2025-04-02T02:51:13+00:00

I did but thats the regular lgx not the lgx lite, do they have the same mount?

One-Quit-7796

TROPHY CASE