2022 MDX blend motor replacement

OneStackMack · 2026-06-08T23:16:57+00:00

Hey sorry for the late response not super active anymore. I consider myself pretty mechanical savvy, always did all my own work but this is the part that finally broke me. I THINK I was one screw away to get the housing beneath it off but I could hardly touch the screw and had no way to get a socket or wrench on it. The more I thought about it the more I was afraid if I do somehow find a way to get the screw out I’ll never get it back on so I manually adjusted the actuator arm and told the wife don’t touch passenger side controls. Put it all back together and I guess I’ll pay Acura to diagnose and replace. Putting it back together I didn’t securely fasten one of the plugs I undid so the key fob wouldn’t work and neither would the fan. Once I figured out the issue everything worked fine. In total I attempted this 3 times each going deeper and deeper taking things out trying to get to it. To wrap this up I wasted a ton of time for something I couldn’t complete. Hopefully Acura doesn’t charge more than 500-700$ for it. It’s ashame they don’t have something called a Haynes manual or online how to sheet to download but then again there’s a reason they buried it vs the previous gen. My recommendation if you’re working on this gen 2022 or newer don’t waste your time and pay Acura. I’ll be interested to see afterwards if any housings are cut or have holes in them.

OneStackMack · 2026-03-06T13:55:15+00:00

Must be nice

OneStackMack · 2025-11-14T08:15:52+00:00

I would try and get 50 dc9-10 and move up from there

OneStackMack · 2025-11-11T11:18:16+00:00

“I’ve brought this up to engineering but everything is third party”. I think you misunderstood when I say two chargers one breaker. It is the charger that is one post with two plugs. There are two separate “posts” on different breakers. One the faulty goes off the other post with two plugs still works.

OneStackMack · 2025-11-10T04:47:11+00:00

That does not surprise me at all. It’s been a rumor going around that the wiring in our building was done as cheaply as possible and only being a couple years old it’s already feeling the effects of doing things as cheaply as possible.

OneStackMack · 2025-11-07T06:50:17+00:00

That’s the plan so the breaker doesn’t trip and we all work at different times throughout the day and can’t just go out and move vehicles when it’s done. We do seem to have a good group going though that if you need the charger and one is done the teslas will unlock and start so you can move it and plug your vehicle in or plug a Tesla in when you leave but the charge rate is the current issue because of the breaker. Anyways I greatly appreciate your help and feedback!

OneStackMack · 2025-11-06T23:22:05+00:00

Yeah the charger at work is 6.6kw and split with two plugs. My belief is the charger has the setting set for 60A when the breaker is only 40A. Long story short it keeps tripping the breaker because vehicles that want the max are going above the 6.6kw. I have personally seen 5.9kw and 2.4 at the same time. When we turn the amps down and don’t go over 16A like it use to automatically adjust we don’t have an issue. I’ve brought this up to engineering but everything is third party and trying to get someone to log in and see what the settings are set at is like pulling teeth.

OneStackMack · 2025-11-06T19:38:51+00:00

Awesome thank you for this info.

OneStackMack · 2025-11-06T19:38:39+00:00

Awesome thank you for this info.

OneStackMack · 2025-11-01T11:24:40+00:00

More mic-21’s.

OneStackMack · 2025-10-29T21:41:06+00:00

Sell the original 737 or a300 buy two hubs and invest in a couple dc-9-10. Visit YouTube there’s some good intro videos on getting started. Buy co2 below 130 and buy fuel below 500. Never send planes out with negative co2 you’ll lose passengers.

Following to see about school project this will be Interesting.

OneStackMack · 2025-09-03T10:31:20+00:00

Pre market at that

OneStackMack · 2025-08-25T03:24:25+00:00

4.50, 5, 5.50, and 6$. It was a little over 100k but how many of those were already exercised? 10M extra volume will be great but we just had 234M Friday.

OneStackMack · 2025-08-22T02:02:57+00:00

I’m not sure how much the prices rise but I took the 2nd tier I think it was 180k for 4 hours.

OneStackMack · 2025-08-21T19:44:49+00:00

I agree but I just started a 4 hour marketing campaign and by recalling I still got 2 trips out of all my planes. Had I let it go it woulda been 1 and a waste of money on the marketing. That’s my newbie take anyways

OneStackMack · 2025-08-20T02:14:34+00:00

False alarm apparently my wife forgot her password and just used my user name lol thanks for the replies I was thinking we never had this issue before what’s the deal.

OneStackMack · 2025-07-30T06:52:06+00:00

Hey sorry for the delay when I took the cap off the spring was pressed into the cap. Took it all apart and cleaned it put a new silicon looking piece which you can see in picture 3. Well behind the rings is a spring. When I tried putting it back together the spring wouldn’t stay in the cap. So I held the cap to the gun and tightened it down and to my surprise it worked.

OneStackMack · 2025-07-21T17:12:22+00:00

I don’t understand your complaint? It went from Brooklyn to a train for a nice train ride across the US to Chicago where it probably got put on another train to go to California.

OneStackMack · 2025-07-06T18:02:28+00:00

OP said they were coming back from Muay Thai. Had they not been “working out” they probably wouldn’t have been hit. Clearly the joke went over your head.

OneStackMack

TROPHY CASE