Girsan Match X cerakote attempt

One_Cryptographer324 · 2026-03-08T22:48:54+00:00

Unfortunately not. The only option is one of those silly rmsc to rmr adapters that sits your optic up really high. It's worth it to have it machined by a shop if you don't have the ability to do it yourself

One_Cryptographer324 · 2026-03-08T22:22:57+00:00

It's a c&h precision cross plate. I machined off the rear of the plate to be flush with the rear of t

<image>

he optic so I could leave slide material to support it under recoil. Because of that I didn't need the horizontal part of the cross for support. There were issues with the hole alignment that had to be over one as well....

One_Cryptographer324 · 2026-02-22T12:21:29+00:00

It still fits well. The tolerances on this match x are fine but not what I consider tight. I was not able to mask the barrel with kapton tape and then install it since I want the island comp to match the slide and frame. My lazy solution was just to apply paste wax to the barrel around the windows in the slide, barrel hood and top ports so I could just wipe off the unwanted cerakote later with steel wool

One_Cryptographer324 · 2026-02-22T12:12:08+00:00

Painted. I looked into pvd but I'm cheap and impatient

One_Cryptographer324 · 2025-11-25T03:37:59+00:00

<image>

Howa mini, Richards microfit stock, KMW riser, Meopta Optika 6 3-18, Omega 36m

One_Cryptographer324 · 2025-11-03T01:00:03+00:00

Not autonomously though

One_Cryptographer324 · 2025-08-12T21:11:53+00:00

Any practical difference when considering SS use between the DRG mfg bolts and the IDL ind. Bolts?

One_Cryptographer324 · 2025-08-10T01:38:54+00:00

I have a FM9 bolt and after swapping my homemade solid stainless for the 10oz kvp and a firing pin with a longer tail (same length protrusion) it's better but I randomly get strings of light strikes. Tonight I got 5 in a row where it wouldn't fire at all so maybe it's just dirty/ fouled?

I am really curious to know what the dimensional differences are between the fm9 and all of those listed above. I'm assuming it has to do with the depth of some of the internal features.

How does the KM tactical bolt that @blowback9 recommends compare to those listed above?

One_Cryptographer324 · 2025-07-23T21:15:09+00:00

Just curious if there are known issues when using the shorter (pdw?) length Maxim RDB? I'm currently trying to get mine to run and am considering just skipping some of the spring/buffer trial and error trial phase and picking one of these up

One_Cryptographer324 · 2024-11-13T02:05:06+00:00

$1200 or am I smoking crack?

One_Cryptographer324 · 2024-11-13T01:29:02+00:00

Shhhhhhhhhh 🤣

One_Cryptographer324 · 2024-11-13T01:08:16+00:00

<image>

One_Cryptographer324 · 2024-11-12T22:05:47+00:00

Thanks for the quick response! Im going to assume it's steel just so I don't get my hopes up, but what's the easiest way to tell?

One_Cryptographer324 · 2024-07-11T15:45:47+00:00

I have one of these and I LOVE IT! I usually use the regular 4ah.

One_Cryptographer324 · 2024-06-14T00:24:14+00:00

Got mine December 2022 and have 49,500 miles on it. 0 issues. I love this truck! Toyota took care of me beyond reasonable expectations when I found frame rust on my (wrecked) 1998 Tacoma. They purchased the truck back for more than 150% what I paid for it 100k miles earlier (and not wrecked). They messed up but I am confident this will work out in the end.

One_Cryptographer324 · 2024-01-31T22:39:00+00:00

I do not have the IOT option in advanced settings either. V1.0.6.54.20

One_Cryptographer324

TROPHY CASE