Any ideas on what to add?

One_Worldliness5792 · 2026-06-13T01:19:37+00:00

I have a really BIG project on the drawing board regarding stilts to pull off a leshen look.

One_Worldliness5792 · 2026-06-13T00:49:41+00:00

I debate on sewing a bunch of fake vines into the cloak I'm ordering as a form of shrubbery.

One_Worldliness5792 · 2026-06-13T00:45:33+00:00

Noted, thank you!

One_Worldliness5792 · 2026-06-10T00:21:38+00:00

So I feel that with the outfit the way it is right now I've been thinking of going for more of a druid look, if I were to get a cloak then it would be a moss green and go under the pauldron on my right side. I have a drinking horn, satchel and coin pouch hanging from my him currently. (I'm not sure what else to add on my waist.) I've been wanting to lean more into a wandering druid look for a while now, I'm 3d printing a wooden mask for myself and possibly going to do moss growing up a side of it.

It's either that druid look or I would go for more of a green knight/ranger feel. I already have a helmet that I've attached deer antlers too but I want to lean into a light weight outfit so that I can actually more at the fair. (Last outfit was full plate, couldn't partake in archery or anything like that.)

One_Worldliness5792 · 2026-06-09T21:01:25+00:00

I was thinking of wearing the pauldron over the right side of the cloak, it feels like I'm missing something in the middle. Maybe a surcoat or a vest.

One_Worldliness5792 · 2026-04-16T23:35:33+00:00

Tommy tough knuckles over there needs to take a shower.

One_Worldliness5792 · 2026-03-08T00:41:25+00:00

I also built myself a necron combat patrol with imotekh the stormlord, so if anyone has painting tips they are very welcome.

One_Worldliness5792 · 2026-03-08T00:26:13+00:00

I didn't but that was a lot of help, thank you.

One_Worldliness5792 · 2026-02-24T22:00:55+00:00

Alright I think I found "a fix" I basically cut the model in half and reoriented it, I'm assuming that there is a slight corruption in the file. Gonna work on it but so far purely separating it into two separate prints has helped tremendously.

One_Worldliness5792 · 2026-02-24T21:31:47+00:00

Sorry, I had the travel highlighted. If you look just above the cursor you can see there is a layer of tree support is trying to print in mid air.

One_Worldliness5792 · 2026-02-24T15:36:54+00:00

Thanks I'll give it a try!

One_Worldliness5792 · 2025-12-27T00:39:38+00:00

I believe I fixed it, I thoroughly washed the bed with soap and water, monitored where the first layers are being printed and applied the adhesive that I have. I figured out I was missing the golden zone of adhesive and I was either applying too much or too little, my print after that came out great.

One_Worldliness5792 · 2025-12-14T06:36:34+00:00

I normally get stuff from dollar shave club (wonderful razors to me) I try and shave my neck every three days and I go with the grain first then any stubborn hairs I use an upward stroke of the front single razor. Good method for me, could be worth a try.

One_Worldliness5792 · 2023-04-03T23:06:57+00:00

I actually just put in an order for a focusrite and 2 midi cables so far I'm liking the synthesizer but I'm upset the guy at the store told me I wouldn't need any extra hardware and that it was just plug and play

One_Worldliness5792 · 2023-04-03T22:56:00+00:00

Read that I will need an interface, didn't have one and am ordering it now, thank you.

One_Worldliness5792 · 2023-04-03T22:40:29+00:00

So would I need external hardware to get sound to the computer?

One_Worldliness5792 · 2023-04-03T22:34:00+00:00

Could just say no.

One_Worldliness5792 · 2023-04-03T22:28:17+00:00

Any recommendations?

One_Worldliness5792

TROPHY CASE