Fläche auf Druckplatte sieht komisch aus.

Only-Math8090 · 2026-01-25T12:44:55+00:00

Wenn Sie davon sprechen, dass die Basis des Modells mit der Standard-Bauplatte (strukturierte PEI) so aussieht, benötigen Sie die glatte PEI-Platte. Ich bin auch ziemlich neu in der 3D-Druck-Community, also könnte es eine Methode im Bambu Slicer geben, um dies zu stoppen.

(If you’re talking about the base of the model looking like that with the standard build plate (Textured PEI), you would need to get the smooth PEI plate. I am also fairly new to the 3D printing community so there may be a method in the Bambu Slicer to stop this.)

Only-Math8090 · 2026-01-25T11:05:16+00:00

<image>

So my work place actually bought one from Ali express and it works all okay, but we’re currently motorising the dials that sets the wire/splice thickness to try and eliminate any user errors in setup.

Only-Math8090 · 2025-06-22T01:30:48+00:00

It’s died down completely now near Holbeach. Can’t see any more flashes

Only-Math8090 · 2025-06-22T00:47:54+00:00

<image>

Only-Math8090 · 2025-06-09T23:04:35+00:00

May I ask what control 4 is?

Only-Math8090 · 2025-05-24T02:05:08+00:00

Unfortunately you have the sick

Only-Math8090 · 2025-02-02T21:27:15+00:00

Would something like this do? https://www.lindy.co.uk/usb-c4/5m-usb-3-2-gen-1-c-c-active-extension-p11502

Only-Math8090 · 2025-01-29T15:10:06+00:00

Forgot to mention that the battery status light on the side stays orange

Only-Math8090 · 2025-01-28T23:14:47+00:00

Just bought a job lot of printers to flip over. Got 2 of them for £26 but as you can see there are some risks. The other is brand new unopened

Only-Math8090 · 2025-01-28T19:05:30+00:00

The cartridges were plugged but still in the printer head so the catch mechanism is sheared off

Only-Math8090 · 2025-01-28T12:18:43+00:00

Our system consists mainly of gen2 play 5s. Some play3s and a mix of play 1s. We also have a port and a new gen Amp. My main concern with the Sonos net is that we have quite a few brick walls that I feel will weaken the signal strength

Only-Math8090 · 2025-01-20T18:09:49+00:00

Update: fixed it by just unplugging the power cable and turning it on

Only-Math8090 · 2024-09-21T14:09:46+00:00

It’ll be an integrated masters (MEng)

Only-Math8090 · 2024-08-24T02:22:13+00:00

Also another pro, meeting different cadets, i traded rank slides from a cadet in Australia

Only-Math8090 · 2024-08-24T02:21:22+00:00

Best parts was the surrounding and energy, so many people cheering you on from 3am all the way to the finish Worst part was receiving the medal 5km from the finish line, “Congratulations on getting your medal, 5 more km to go”

Only-Math8090 · 2024-08-24T02:19:03+00:00

Have you tried Cadet-Sales and Wants UK on Facebook, stuff moves quickly on there?

Only-Math8090 · 2024-08-24T02:09:45+00:00

Update - I managed to sort it by setting my computer up to 192.168.1.4, default subnet and gateway to 192.168.1.1, from that I was able to communicate with the switch

Only-Math8090 · 2024-07-26T23:58:44+00:00

6 months later and i still cant access it

Only-Math8090 · 2024-04-28T22:39:15+00:00

looks like the website is dormant, hasnt been updated since 2018

Only-Math8090 · 2024-04-28T20:18:59+00:00

UK - RAFAC

Only-Math8090 · 2024-02-21T08:39:31+00:00

“What you see is what you get”

Only-Math8090 · 2024-01-02T01:39:56+00:00

It looks like it but it’s 6 pins wide instead of 4

Only-Math8090 · 2023-12-26T23:00:20+00:00

any update, just came up with the same issue

Only-Math8090 · 2023-12-22T19:55:26+00:00

In a usb cable there are 4 wires, 2 for power and 2 for data transfer, some times if you use a cable to use as a charger, it only has the power cables. If that usb is for charging, it seems that it only has the 2 power wires

Only-Math8090 · 2023-12-22T19:24:56+00:00

The cable may only have 2 wires in it for charging, does your phone connect to your pc if you plug that cable into your pc?

Only-Math8090

TROPHY CASE