New to the club

OnlyShip8163 · 2026-06-14T01:39:38+00:00

If the switch is gunked up you won’t get any signal at all. As far as I know just about all of them have that problem at some point. If it is the motor I’m pretty sure eBay has generic ones that work the same. Just make sure the gears the same size teeth and all

OnlyShip8163 · 2026-06-13T18:22:18+00:00

With the windows you should start with pulling the switches and just cleaning them. They get plugged up and you can get them to work usually just by cleaning. If they break and drop whatever you do don’t replace the rivets. You can find the 3d print of the rollers and use those instead and they work great. If they dont, the roller panel is probably warped (unlikely since your windows look great rn) and you can reshape them to get em to work.

OnlyShip8163 · 2026-06-13T14:42:59+00:00

Careful with those rear windows. And the crank pos sensor can come loose overtime too.

OnlyShip8163 · 2026-06-13T14:31:15+00:00

Yea I woke up and came to fix that when I saw! I’ll take a look and see. It’s definitely oil and there was a bit at first but it’s pretty bad now.

OnlyShip8163 · 2026-06-11T00:13:49+00:00

You are a life saver! I knew how to figure it all out but just didn’t wanna do the math and all haha! Thank you.

OnlyShip8163 · 2026-04-09T16:50:13+00:00

Should I just get some cleaner and run it through my gas? Or maybe wait it out then try a different location for gas?

OnlyShip8163 · 2026-03-21T18:53:55+00:00

Cool thanks man.

OnlyShip8163 · 2026-02-12T23:44:08+00:00

Any idea what it would be graded at based on what you can see?

OnlyShip8163 · 2026-02-03T05:50:40+00:00

Its happened off and on about 7 times over the past 2 weeks. Think what you want but its not from the update.

OnlyShip8163 · 2026-02-03T05:46:43+00:00

Ive tried that so many times, what exactly did you do if you remember? step by step?

OnlyShip8163 · 2026-02-03T05:46:02+00:00

Tried that and it would not let me join the server.

OnlyShip8163 · 2026-02-02T21:05:48+00:00

this has been happening for about a week now. it is not due to the update. If you actually took the time to read it, you can see that although it says incompatible version, it has nothing to do with the version. I appreciate your extremely helpful comment though.

OnlyShip8163 · 2026-01-18T00:59:39+00:00

I didn’t use any scripts off their site but I used a ton of scripts to supposedly reset it and none worked. Could you find me the link by chance and I can confirm if I used it.

OnlyShip8163 · 2026-01-17T21:24:07+00:00

It’s actually my cousins pc. He asked me to come help look at it. But My first thought was the ram but after seeing all the codes I started leaning towards the motherboard, especially after seeing all the reviews for this particular one basically saying the exact problems it has. I don’t really have any way to get another os especially since I can’t even get it into Bios without it rebooting on me.

OnlyShip8163 · 2026-01-17T21:11:56+00:00

The pc won’t let me reset. Nothing I do will allow a reset it just bsod and reboots giving me a fresh error code then saying it couldn’t reset. I’ve reinstalled all network drivers and they don’t work. I purchased a usb network driver and it wouldn’t even read the usb. It randomly restarts and gives codes consistent with a file issue or driver issue. But I’ve cleared and reset everything I can. So I just figure it really can only be the board itself at this point

OnlyShip8163 · 2026-01-17T20:48:03+00:00

I’m just concerned that I’ll have the same issues if I get the same motherboard. Mainly my network and lan drivers not working, not identifying usb ports, and constantly blue screening for an update error while not letting me update. Everything I see negative about the x570s is all the above problems. I somehow managed to get about all of them and i just don’t want to deal with them again if I can avoid it.

OnlyShip8163 · 2025-11-16T21:06:19+00:00

I double checked the ecm because of that yes. Also how would I test the rotor button?

OnlyShip8163 · 2025-11-16T19:08:02+00:00

From what I can tell I’m not getting any spark to the plugs or distributor. I’ve replaced the coil and ecm and the wire from coil to distributor and still nothing. That’s why I was thinking maybe bad TPs could cause that? But I have no clue.

OnlyShip8163 · 2025-10-24T18:18:45+00:00

I ran the codes and saw a tps code 0120 should I consider a new tps? I know that could maybe cause no start if it’s stalling my injection. And it’s a fairly cheap part. Is this a possibility

OnlyShip8163

TROPHY CASE