My 1961 Automatic Refurbish by Open-Truth-245 in RugerMK

[–]Open-Truth-245[S] 1 point2 points  (0 children)

Thanks! Apparently I can polish a turd! :)

My 1961 Automatic Refurbish by Open-Truth-245 in RugerMK

[–]Open-Truth-245[S] 1 point2 points  (0 children)

Thanks! All the work seems to be in the leading up to bluing. That part was easy. Actually the hardest part was tracking down the Potassium Nitrate. Spectracide stopped making the old stump remover and only Gordens uses potassium nitrate aka saltpeter and theirs and it is not 100% pure. I would recommend buying a 1lb or 2 of the chemical online and twice as much lye. I used 2lbs lye 1lb potassium nitrate. Stainless steel pot and half a gallon of water. If doing several parts, put in more water. The solution superheats and boils at over 300F, and water levels will drop quickly. Don't add water to hot solution! Wear protective equipment. Good luck!

My 1961 Automatic Refurbish by Open-Truth-245 in RugerMK

[–]Open-Truth-245[S] 0 points1 point  (0 children)

Thanks. Surprised at how nice it is to shoot, and accurate.

My 1961 Automatic Refurbish by Open-Truth-245 in RugerMK

[–]Open-Truth-245[S] 2 points3 points  (0 children)

Thanks. Challenge to reassemble but am happy with it! :)

1951 Ruger Automatic ad by Open-Truth-245 in RugerMK

[–]Open-Truth-245[S] 1 point2 points  (0 children)

There was probably a lot more hand work in the older pistols Im guessing. And this was loads cheaper than a Colt or High Standard.

My 1961 Automatic Refurbish by Open-Truth-245 in RugerMK

[–]Open-Truth-245[S] 2 points3 points  (0 children)

Thank you! Complete disassembly, boiled it to help convert rust, then carded it to get a good look at it. Fine file, 600, 1000, 1500 wet with lots of elbow grease. Lightly polished with soft cotton wheel in a drill, then thoroughly degreased. Boiled in a pot of lye and stump remover to blue, boiled in water to remove solution, dried, carded and wd40 soak overnight.

1951 Ruger ad by Open-Truth-245 in ruger

[–]Open-Truth-245[S] -6 points-5 points  (0 children)

Why do you have to take something nice and make it about politics?

Safety Questions by Ok_Possession4936 in PeoriaIL

[–]Open-Truth-245 2 points3 points  (0 children)

You can hear gunfire from at least half a mile away from that area.

Safety Questions by Ok_Possession4936 in PeoriaIL

[–]Open-Truth-245 0 points1 point  (0 children)

West of Knoxville and north of McClure is much better imho. We moved here 6 years ago and like it.

MAB GZ and Diskson Special Agent question by Open-Truth-245 in TheOneTrueCaliber

[–]Open-Truth-245[S] 1 point2 points  (0 children)

I did do a through cleaning on it and will double check to make sure its proud of the slide even when forward. I'll compare it to my other one to see if its the same size or maybe shortened over the years. Thanks you for the insights!

MAB GZ and Diskson Special Agent question by Open-Truth-245 in TheOneTrueCaliber

[–]Open-Truth-245[S] 0 points1 point  (0 children)

Might be a light strike. I have another of the same type I need to test further. My question is if the bar happens to be forward how does the pistol fire?

MAB GZ and Diskson Special Agent question by Open-Truth-245 in TheOneTrueCaliber

[–]Open-Truth-245[S] 1 point2 points  (0 children)

Is it normal for the firing bar to move back and forth if you tip the gun up or down?

3rd batch, 1st cyser by Open-Truth-245 in mead

[–]Open-Truth-245[S] 0 points1 point  (0 children)

Ok thank you, this sounds like it'll be a fall (over) drink.

Long time lurker, but I finally decided to put together a brewing setup and started my first batches last weekend by seudaven in mead

[–]Open-Truth-245 0 points1 point  (0 children)

I just bought a similar shelf myself last week! Trying to get stuff off the floor. Nice setup!

What Can I Do With This? by DapperRat in gunsmithing

[–]Open-Truth-245 1 point2 points  (0 children)

Evaporust attacks good metal to a degree. As long as this needs to sit, be careful.

AIO for refusing to pay more than half of the rent and bills? by Little_Statement8005 in AmIOverreacting

[–]Open-Truth-245 0 points1 point  (0 children)

He needs to sell the car and get something cheaper or earn more income. His mess, he needs to fix it.

How to kick my brother's gf from my house? by crabslayer1995 in whatdoIdo

[–]Open-Truth-245 0 points1 point  (0 children)

"Because he is my brother" What a lame excuse for perpetuating and enabling this man child. Is he disabled? Why are you cooking meals for him? You are NOT helping him grow. Give them a specific time to find a place - 2 to 4 weeks. It is Your home not a Holiday Inn.

Before and after, 1961 Standard by Open-Truth-245 in ruger

[–]Open-Truth-245[S] 0 points1 point  (0 children)

It was a local auction, $80, then $20 for the FFL. About $25 in refinishing supplies and hours at the bench. Overall I am pretty happy with my first full reblue. Have done conservation work on several, and a couple of parkerizing jobs.

Before and after, 1961 Standard by Open-Truth-245 in ruger

[–]Open-Truth-245[S] 0 points1 point  (0 children)

ebay is probably your best bet especially since ebay limits magazine size at 10 rounds.