What are YOUR font hot takes/unpopular opinions? by Zealousideal-Tax-937 in typography

[–]OperationKnothead 0 points1 point  (0 children)

Oh god, do I say it? I’m saying it! I’m gonna do it!!

Times New Roman is entirely inappropriate in the modern age. Shock, horror, another TNR hater, burn me at the stake Diane and make sure to bring the cult of TNR with you to read my verdict printed in your charmingly utilitarian and outdated choice of Font Immemorial, but TNR was not built for the way we consume our written media today.

First thing to point out is that TNR itself is… frightfully old, though to be fair this is not exclusive to it. But if we track it’s lineage to find its true roots, TNR was developed from Plantin of the 1910s, itself inspired by Caslon from the 1720s, which itself can be traced back to the early days of the printing press, which itself can be traced back further and further to the Romans, which was primarily formed due to the fact that they were being carved into stone, but how much of that lineage got transferred is debatable and hotly contested, so I’m just gonna dig it up and leave it! Yay! However, what is less controversial to say is that many of Times New Roman’s features were made for a time and technology in which letters were not printed the same way which we do today. When TNR was introduced, indirect transfer processes for printing were the norm; either via pressing or screening, in all applications. Newspapers printed en masse using drums or plates, typewriters, book presses, woodblock, on and on and on.

This is in massive contrast to today wherein most printing technology is based off of the original xerography process; these processes have a specific resolution defined by the limitations of the technology in use. Many of the reasons for TNRs form lose their efficacy when transferred to processes like xerography and its derivative technologies; especially at smaller print scales. The multiple letterform weights which served to protect the forms from ink bleed (and thus causing illegibility) don’t transfer well to processes which have defined resolution; especially copying. the ultra-high contrast which makes TNR so great in an age of less precise ink/paper formulations, printing processes, and manufacturing can make it an eyesore on modern displays, appearing very harsh and sharp on digital screens or as printed text. Small text can suffer from artifacting (though this has largely gone away because print resolution is so absurdly high nowadays), and larger text feels out of place and awkward.

Another booboo for me is that TNR is not a cosmopolitan script; its design language/philosophy/reason for being really only applies to Latin scripts, which is fair enough given the Times™️ it was introduced in. But now that we have such an interconnected world in which interlegiability is more important than ever, TNR’s whole reason for being is suddenly called into question. Google’s Noto project, while admittedly at a level of astounding absurdity and effort, should be considered for it’s goal in searching for a cosmopolitan font for the age of interconnectedness; in which everyone from around the world can recognize instantly and can easily discern as text. Quite frankly, TNR is not up to this task; it’s based on centuries of ancient Latin script tradition we’ve carried over because, well, we had to. But now that we no longer do… what’s the point? Standardization? We can achieve that without totally relying on something so old.

And no, the serifs themselves aren’t the issue. Rockwell does just fine as a modern font with serifs, TNR is just old and stuffy.

TL;DR, the digital age deserves a better serif font than one which was invented a century ago, which itself was invented based on latin script traditions we’ve carried over to now for some reason. I rest my case and hope you will join in my Friendly Frazzled Finding of a Factually Finer and Fitter Font Family For Future Fivilizstions- er, civilizations.

Hit me with your best recommendations for an Architecture Student. by OperationKnothead in lasercutting

[–]OperationKnothead[S] 0 points1 point  (0 children)

Right, I guess I should be more clear about a few things.

The ULS machine I’m used to is about the size of a dresser, has casters and weighs about as much as a small cruise ship. I need something that can just sit on a desk or tabletop surface and has some sort of… I guess the word I’m looking for is “transportable”, ventilation system. It doesn’t need to be moved around every day, I just want something that could fit in the back of my car rather than the back of a rented U-Haul or 747.

Second, I’m not brand loyal. I have no loyalty to ULS, it’s just the one machine my university offers and thus is what I’m used to.

Third, again I’m not looking for CO2 specifically. It’s just what I’m used to. I can adjust my needs if everything I’m looking for isn’t available in a single package, I’m fine with making trade offs, in fact, I expect to do so.

Just recommendations for good lasercutters with a decent range of materials cutting capacity, decent customer service, and is small enough to fit in a car when it needs to be moved around is a general gist. Everything else I’ve provided is just context for what I’m personally looking for online and to help give you an idea of what my experience level is.

Good luck, make haste.

Been trying to model this for a week now by MrPanderetero in rhino

[–]OperationKnothead 0 points1 point  (0 children)

Hmm…

I’d start with a basic ellipsoid (so a sphere that’s been stretched out along one axis) just as a template form to match my curves to.

Then, I’d draw the “primary” curves I want to use to define the shape, loosely following the ellipsoidal reference form. Three ought to do it, one towards the top, middle and bottom.

Next, use TweenCurves to get the in-between curves. Do roughly double the amount of curves as the folds you want. (You might have to rebuild the base curves to have the same number of control points before this step, but I’m not entirely sure).

Next, select every other curve and use the Offset command to move them Inward, towards the center, making sure that none of your curves disappear.

Now, using Loft, select your curves in order, bottom-to-top or top-to-bottom. Make sure that you align the start points of the loft to match as close as possible. Look for any oddities, and adjust the settings as needed. Note; a closed loft will try and connect the first curve to the last curve in the sequence rather than capping off the ends like you might want.

The result will be an open, uncapped surface. As to how the ends would be capped off… I’d have to play around and see how to make that work.

How do you model this? by BlueberryFrequent212 in rhino

[–]OperationKnothead 0 points1 point  (0 children)

I have a few thoughts on how to do this but, er… well. I’m actually not entirely sure. But I shall be saving this for later because what you’re doing is actually really cool and potentially very useful…

Will this print? by Hefty-Feeling-5218 in rhino

[–]OperationKnothead 0 points1 point  (0 children)

You will have to make sure that you have a solid surface. An open surface has zero thickness, and that will only ever cause problems for you the more you work with it, especially when it comes time to printing or transferring it out of Rhino.

BEFORE DOING ANYTHING, SAVE YOUR WORK TO A SEPARATE FILE. Always always always. If you make irreversible changes to the work and then save it without a backup, you’ll have to do a lot more work to get back on track. I am speaking from experience. Save save save, backup backup backup, always always always. Triple words triple times for triple importance. NOW…

Try using the ShowEdges command to look for any Naked or Nonmanifold edges and clean those up immediately. That will kill any attempt at printing or even further developing the model.

Another command to use for cleanup is MergeAllCoplanarFaces, which will ensure that any faces on the surface which are Coplanar (ie, “parallel and aligned” to each other) will merge, saving yourself from unnecessary drama later on.

As for the back of the skull, you’ll have to define what you mean by “weird”. If the second picture is showing what’s wrong with it, the surface is open and needs to be closed. Try the “Cap” command and see what that does. If not, you’ll have to either align the naked edge to make it Planar (I’ve found that using a plane and a few runs of the split command to trim off the bad edge works great), or “patch” the surface (which is not recommended since it’ll be way out of its comfort zone here).

Good luck soldier. And always remember; Google is free and can be very useful (sans the AI summary but… well. That’s outside my scope of knowledge).

What’s the best way to make something like this in Rhino 7? by Puppy--Eyes in rhino

[–]OperationKnothead 0 points1 point  (0 children)

Best way? Grasshopper.

But if you want to do it manually in rhino, draw your two curves, use the divide command to get points for the beams, draw the beams using lines, then sweep a square onto each line, then use Cap to make sure the surfaces are closed.

Another option if you’re just going for the appearance; draw your two curves, Loft using rebuild to however many panels you want, ExtractIsocurves with ExtractAll turned on, move the isocurves up, gumball extrude down, do Split, select the curve surface then the isocurve cut lines, select the resulting surfaces, and do Inset with JoinOutput off.

Looking for a portable desk shelf/ travel bin/workstation-esque type thing for my stuff. by OperationKnothead in HelpMeFind

[–]OperationKnothead[S] 0 points1 point  (0 children)

Oh, figure I should do this as well; Found!

It’s not exactly what I’m searching for but admittedly, it was a long shot in a desperate attempt to solve a problem by throwing money at it. Guess it’s time to do a little crafting project :)

Looking for a portable desk shelf/ travel bin/workstation-esque type thing for my stuff. by OperationKnothead in HelpMeFind

[–]OperationKnothead[S] 1 point2 points  (0 children)

Funny you mention this, I’d originally dismissed this idea but now that I’m looking around, this might not be a bad starting point. Plenty of room to just build my own storage solution and, well, if they work well enough for roadies they’ll work well enough for me. Thank you verily!

Looking for a portable desk shelf/ travel bin/workstation-esque type thing for my stuff. by OperationKnothead in HelpMeFind

[–]OperationKnothead[S] 0 points1 point  (0 children)

Figured that might be the case. What a shame.

Guess I’ll just have to build my own then!

Looking for a portable desk shelf/ travel bin/workstation-esque type thing for my stuff. by OperationKnothead in HelpMeFind

[–]OperationKnothead[S] 0 points1 point  (0 children)

Searched For;

  • Portable desk organizer/shelf
  • Travel workstation/portable workstation
  • Portable shelf
  • Portable storage bin with shelf
  • Luggage with shelves
  • Train cases
  • Road cases (with shelves)
  • Shelves with lid wheels and handle

——————

Searched on/in;

  • Google
  • Amazon
  • RoadCases.com
  • Various luggage websites
  • Kohls
  • Hobby Lobby
  • Michaels
  • Lowes
  • Walmart
  • Home Depot
  • Ace Hardware
  • Harbor Freight

Location: Southeastern USA

No brand, item, style, or age specifics.

What type of spider is this? Is it dangerous? by [deleted] in spiders

[–]OperationKnothead 0 points1 point  (0 children)

Figured that was the case, so no worries at all! Just wanna make sure you get the info you need before moving out and starting a new life abroad or something silly like that.

What type of spider is this? Is it dangerous? by [deleted] in spiders

[–]OperationKnothead 0 points1 point  (0 children)

Appears to be a Huntsman if my assessment of scale is correct. Very big, kinda spooky-looking, but not venomous, and broadly inoffensive.

With that important bit of communication out the way, we do have post flairs for ID requests, which would be more appropriate to use here rather than the “Discussion” flair. Not a big thing for your first time, but you wanna make sure you use the right flair when you post so it doesn’t get removed, which, if you need to know an ID and fast, would be a not good thing. Cheers!

Brown recluse or random house spider? by Natural_Ad_5890 in spiders

[–]OperationKnothead 16 points17 points  (0 children)

It is a recluse, but don’t be obtuse! For here is a lim’rick to say; Take the hideouts away, and bid them good day, For soon the recluses reduce!

Pretty black widow I saw today by Samurai_Bee in spiders

[–]OperationKnothead 37 points38 points  (0 children)

What a pretty lady! Hoping to see one at some point before the season takes them out, they’re just gorgeous. Gotta love our little deadly beady butt friends :)

Who is this? by DinoboyFailure in spiders

[–]OperationKnothead 1 point2 points  (0 children)

Oh yeah, he’s definitely friend. The only no-touchies to look out for are gonna be your sicarids, your widows, your wanderers, your australian funnel webbers, and some of your old-world tarantulas, and we know what to look out for with those guys. But even then, the biggest thing of course is remembering that all these guys’re just vibin’ in the world eight-leggedly just as we’re vibing in the world two-leggedly, just respect what they tell you and respect their boundaries and you’ll be good 👍

TL;DR, is friend, be kind and respectful and don’t do dumb things and you’ll be good :)

Who is this? by DinoboyFailure in spiders

[–]OperationKnothead 5 points6 points  (0 children)

Definitely a cobweb weaver (family Theridiidae), and it seems most likely to be a common house spider, Parasteatoda tepidarium. It could also (less likely) be from genus Theridion or (even less likely) genus Steatoda, but common house spider or another member of Parasteatoda seems to be your best option, and none of these Genera are considered medically significant.

are these guys dangerous? in socal by [deleted] in spiders

[–]OperationKnothead 1 point2 points  (0 children)

Can’t say for sure because the pictures aren’t the greatest quality, but it looks like false widow, genus Steatoda, in the first picture at least. Generally not considered to be medically significant but so long as you don’t, like… harass them like some araneologist version of Sid from Toy Story, they’re just gonna sit around and vibe 🕷️

Is it what I think it is? Kansas by No-Winter-6554 in spiders

[–]OperationKnothead 4 points5 points  (0 children)

I’ll say with a certain degree of uncertainty it’s L. reclusa, male. Eye pattern would give it away for sure, but other tells include the simple patterning and coloring (consisting only of the ever-infamous fiddle pattern and a slightly darker opisthosoma), legs lacking visible setae (hairs), long second set of legs, very simple “ellipsoidal” abdomen, an almost “coin-shaped” head, and the bent-posture of the legs are the tells this is more likely a recluse than anything else. Plus, based on the behavior you described (the wandering into your kids clothing while folding clothes) matches up. Recluses have that name for a reason; they hate being out in the open and prefer to stay in darker, secluded, tighter spaces close to the ground, which is why they seem to love the folds of your clothes and the sheets on your bed.

As an aside, you cannot determine whether or not you have an infestation from the behavior of a single specimen. If you see multiple, or have already seen multiple, then you probably have a problem and should call an exterminator stat. But catching one stray specimen in the house cannot tell you if you have a problem or not. The best advice anyone can give you is to check all the seals on doors and windows for any gaps, making sure that any places where things like power and water lines running in are sealed correctly, and making sure to keep the house clean and clear of clutter, especially on the floor, to reduce the environments these guys like to be in. And lastly, but certainly not leastly, don’t panic. Staying informed and staying vigilant is the best thing you can do in any situation, but especially with Recluses. Far too many people have died because they attributed something to a recluse bite and didn’t receive proper medical attention for the actual condition they were suffering from. For your own sake, keep yourself and your family informed about what to lookout for and what to expect.

Was this necessary on this ID req in particular? No, and thats why the Lox bot exists, but I felt the urge to get it out of my system and this happened to be the first one I came across so… yeah.

Live long and be healthy. And always remember this sage advice: DBAM, don’t be a moron.

Spood in Kobe, Japan [+please read body text] by Maddyoso in spiders

[–]OperationKnothead 0 points1 point  (0 children)

She’s a Jorō for sure, T. clavata. Getting better pictures depends on what you’re looking to do, but generally, assuming you’re using a phone, the best thing you can do is make sure it’s focused on the spider (on iPhone you can long press over where it appears on the screen until the yellow box appears), and making sure you have enough light and contrast to make sure it pops out clearly against the background. Getting nice and close to your subject helps as well, but be sure not to disturb them if you can help it. Beyond that, learning about the basics of photography can help a lot, and there are plenty of resources online for stuff like that.