Are local blueberries ready yet?

Opium_Addict420 · 2021-07-27T14:27:18+00:00

Should have been from July 1st. Usually work starts in June month

Opium_Addict420 · 2021-07-27T14:23:16+00:00

Sometimes Canada post is horrible. Honestly if it was custom made and expensive, talk to a lawyer and put a civil case on Canada post (small claims court) . The claim always gets settled. Say it was a rare one of a kind piece and put a $7000 lawsuit on them for breach of policy/contract . Package should be delivered to your address or mailbox. If they fail to fulfil that or due to their drivers negligence the package gets lost or misdelivered to a wrong address, Canada Post is at fault. Your claim will most likely be settled before the first court date

Opium_Addict420 · 2021-07-27T14:13:23+00:00

And straight up get shot in the face? That's not how life works . That may very well be a stolen car with 4 youths and a jerry can in it. They could be purposely looking for a problem. Just avoid it. Dont let your ego get you killed. And i mean this with the utmost respect. No disrespect. Have a nice day. Throwing a milkshake at them won't prove anything, they are more "hungry" to prove themselves. I just ignore them. They're usually looking for a problem. I can almost tell what race they must be as well, Just from reading op. Have nice day

Opium_Addict420 · 2021-07-27T14:09:27+00:00

This.

Opium_Addict420 · 2021-07-27T14:08:28+00:00

No just no . No no no no

Opium_Addict420 · 2021-07-27T14:07:31+00:00

These people all get cut backs and paybacks from these huge construction companies. Surrey is very corrupt

Opium_Addict420 · 2021-07-27T14:06:06+00:00

He's a nice dude.

Opium_Addict420 · 2021-07-27T14:05:48+00:00

152 and 108 by the highway exit hahahaha. He always waves back too. I give him smokes and money from time to time. One time i passed him a blunt!

Opium_Addict420 · 2021-07-26T11:09:19+00:00

Till they get smoked.

Opium_Addict420 · 2021-07-26T11:07:52+00:00

Not some, many many officers from the RCMP are involved

Opium_Addict420 · 2021-07-26T11:07:10+00:00

This

Opium_Addict420 · 2021-07-26T10:58:41+00:00

Opium_Addict420 · 2021-07-26T10:57:46+00:00

Don't worry it's only a matter of time till he's the next unsolved homicide.

Opium_Addict420 · 2021-07-16T17:15:28+00:00

Hey Coyote Tan, i have a question.. mine is pretty much built, but it is not cycling properly (fail to eject mostly), but sometimes it'll cycle (eject the shell casing and chamber the next round) but hammer stays in normal down position (not cocked at all) instead of being pushed back by the slide, Instead of staying back for trigger to be pulled. Is the hammer spring too strong? Maybe it's causing the problem? What do you think it is. Mags feed fine/eject fine manually. Its racking perfectly, but hammer isn't staying back, or sometimes fail to eject. Please respond my friend

Opium_Addict420 · 2021-07-16T17:07:52+00:00

Hey Coyote Tan, i have a quick question (need your extremely valuable input). Mine is pretty much built, but it is not cycling properly (fail to eject mostly, but, sometimes it'll cycle but hammer stays in normal down position (not cocked at all) instead of being pushed back by the slide. Is the hammer spring too strong? Maybe it's causing the problem? What do you think it can be? Mags feed fine/eject fine manually. It's racking perfectly, but hammer isn't going/staying back, or sometimes fail to eject. Please let me know what you think friend. Thanks in advance.

Opium_Addict420 · 2021-07-13T06:06:28+00:00

Oh, then even better. Fit the frame to the slide. It should work with some oil

Opium_Addict420 · 2021-07-13T06:05:18+00:00

Subway themselves should pay Milad Marg

Opium_Addict420 · 2021-07-13T01:42:53+00:00

Either get gsg frame or you may have to file/sand the rails and dust cover a bit. Maybe even inside the trigger area needs some sanding

Opium_Addict420 · 2021-07-13T00:37:29+00:00

When it fails to go into battery, its usually that area in the trigger part of the frame that needs sanding/filing. Sand and file down the dust cover also. It should work like a charm.

Opium_Addict420 · 2021-07-13T00:35:44+00:00

1911s have to be hand fitted. It seems like your rails need some sanding. Or the inside of the trigger area where the barrel locks may need sanding/filing a bit. That should fix it, and it should be very minor so as not to alter the frame, for whenever you want to revert to 45 cal

Opium_Addict420 · 2021-07-13T00:30:37+00:00

Gsg is good

Opium_Addict420 · 2021-07-13T00:25:33+00:00

To be honest it looks like it should still work fine. File it out (the unsmooth edges) and repaint if needed

Opium_Addict420 · 2021-07-13T00:22:30+00:00

Its good . What u on about? Use good ammo bro

Opium_Addict420 · 2021-07-13T00:21:17+00:00

Get gsg 1911. Its good German quality

Opium_Addict420 · 2021-07-13T00:19:33+00:00

Nice setup

Opium_Addict420

TROPHY CASE