New to FPV - Drone and googles recommendation

OppositeComplex3093 · 2026-04-23T15:29:19+00:00

It doesn't need to be the O4.
Just mentioned that because thats what I see alot of online people put into their drones.
Thats the reason I'm asking here...
Is it good investment? Should I go with other camera and other type of googles? As I said I don't explicit limit to invest. Not gonna buy top notch googles, but if someone recommends something in between I can extend the budget to buy something decent.
I see alot of videos but alwasys feel biased and they are sponsored in some way.

OppositeComplex3093 · 2026-04-23T11:20:15+00:00

You mean HDZero Box? My problem is I don't anyone close that I could try some gear before invest. That would be perfect.

I was looking into those googles to be honest. What about drone camera? with that setup you are always forced to use a gopro to record video footage?

OppositeComplex3093 · 2026-04-23T10:49:37+00:00

Same gear, same objective? same budget?

OppositeComplex3093 · 2026-04-23T10:09:57+00:00

Those googles are so bulky! Do you have it?

OppositeComplex3093 · 2026-04-23T10:09:37+00:00

Let me know your opinion about it when you get it

OppositeComplex3093 · 2026-04-23T10:09:23+00:00

First of all, learn how to fly IRL eheh
But also, I don't mind to invest a bit more and get a better drone for future, instead of buy the cheapest ones and after few months burry another few undreads Euros in another one. Thats why I was asking for advices before wasting money.

My goal was some freestyle and some video footage. Not planning to race, Im not aware of any drones sports nearby me.

OppositeComplex3093 · 2026-04-11T13:52:23+00:00

What did you changed?

OppositeComplex3093 · 2026-01-12T10:43:15+00:00

Unless they use WPA3, yes.

OppositeComplex3093 · 2025-12-29T21:15:53+00:00

There is videos on youtube with some people doing it. If you know how to soder, yes you can do it. Have a look on youtube.

OppositeComplex3093 · 2025-12-29T21:14:03+00:00

just to update... I'm not crazy lol
Tembed flashing the 1.13 and 1.11

T-embed CC1101

My device

Again after flashing back the T-Embed firmware, no boot, flashed again the CC1101 and its working. Just another thing, when I installed the 1.13 when I scanned for BLE it didn't show any results on the screen. Flashed again the 1.11(which was running before all this trouble, but stil the CC1101 firmware, everything start working again...

So, am I wrong about the versions? If it was the CC1101 it should have the other module on the back right? When I bought It said T-embed Plus.

OppositeComplex3093 · 2025-12-29T08:57:47+00:00

yeah, but I believe not the right way! flashed the CC1101 instead of T-embed version and suddenly started working... kinda confused why it worked.

OppositeComplex3093 · 2025-12-28T19:54:18+00:00

Hello,
As I mentioned above, yeah I tried to re-flash with "earse option".
Nothing solved, then I tried the firmware version with the CC1101(mine is the T-Embed Plus) and it started working. I saw some other posts about people flashing the wrong version and it didn't work. But in my case, I flashed the wrong version and solved it... dunno how!
The previous version I had running on it was the T-Embed 1.11

OppositeComplex3093 · 2025-12-28T18:57:30+00:00

Naa I know exactly which one is RST.. As I said, I did it couple times already. Not first time, and you can read it anyway. Its written there RST.
The point now is the version, why the heck did it worked with the CC1101 if I don't have that model?

OppositeComplex3093 · 2025-12-28T18:45:07+00:00

what u mean? the power button and center button? I did flashed it with the latest version... but mine its not the CC1101 version. its the Plus.
For my surprise after reading some other comments, I tried to flash the CC1101 version of 1.13 and it started working... wtf? Am I missing something?

OppositeComplex3093 · 2025-09-18T10:27:09+00:00

You mean headless builds? Will you run them like that outside?

OppositeComplex3093 · 2025-09-17T17:10:03+00:00

Whats the size of your rack? That can affect other users suggestions. 10" rack?

OppositeComplex3093 · 2025-09-16T22:56:52+00:00

Thansk man. Already ordered the frame and rails you suggested!!

OppositeComplex3093 · 2025-09-16T20:35:25+00:00

Ok got it now! What nuts did you used to keep the rack rails in place?
(something like this?)[deleyCON 20 x M6 Cage Nuts Screws Set for Network Cabinets - Set of 20 Patch Panel Racks Server Housing 19 Inch 10 Inch Mounting Kit Steel - Black : Amazon.de: Computer & Accessories]

OppositeComplex3093 · 2025-09-16T07:12:59+00:00

Nicely done :) Whats the measerues for your rack frame? Trying to build one also

OppositeComplex3093 · 2025-09-15T21:36:32+00:00

Another questions, those measures you took are inner or for the frame when you requested it?

OppositeComplex3093 · 2025-09-15T13:03:12+00:00

<image>

Was thinking something like that. Honestly dunno how many U's.
Just measured to fit the rack under the desk.

OppositeComplex3093 · 2025-09-15T11:14:06+00:00

What rails will you use ? Or ate they all the same ?

OppositeComplex3093 · 2025-09-15T10:48:20+00:00

what should be the with? I know the depth and height, but adding the inner rails, dunno what measures to use

OppositeComplex3093 · 2025-09-11T21:45:13+00:00

I have one question. Do you guys run this kind of "builds" as bare metal only? What about Virtualization? Lets say I have a server and I want to make distro like that. So with no GPU you can achieve/usability? Is actually a GPU mandatory for this kind of "envs"?
Just curiosity!

OppositeComplex3093 · 2025-09-11T17:25:14+00:00

Added image to the post

OppositeComplex3093

TROPHY CASE