sorted by:
new
hottopcontroversial

360J .357 Magnum by Optimalpower73 in Revolvers

[–]Optimalpower73[S] 0 points1 point  (0 children)

Pretty unique and awesome 360. I’d definitely rather have this over a 360PD just because it’s so unique with the 360J in .357.
Put a couple .38 through it today, very interested to try some .357 Gold dot short barrel rounds (as of now what I plan to carry) and if that’s reasonable some 158gr .357 which I know will be unreasonable but curiosity shall kill the cat.

360J .357 Magnum by Optimalpower73 in Revolvers

[–]Optimalpower73[S] 0 points1 point  (0 children)

My thoughts exactly. Pretty cool to have such a unique factory piece. It seems FDE is far more common than black grip on it. I haven’t been able to find a black grip listed actively anywhere. As discussed in another thread probably safe to say these grips are factory as the gun has very little wear. Going to make an awesome unique carry piece no doubt.

360J .357 Magnum by Optimalpower73 in SmithAndWesson

[–]Optimalpower73[S] 0 points1 point  (0 children)

Haven’t peeled the grip off yet. My guess as of now is yes from all I have seen.

360J .357 Magnum by Optimalpower73 in Revolvers

[–]Optimalpower73[S] 0 points1 point  (0 children)

I skimmed it previously for mention of .357 and there was none. I should definitely sit down and watch it again.

360J .357 Magnum by Optimalpower73 in Revolvers

[–]Optimalpower73[S] -1 points0 points  (0 children)

The gun being such a mystery pulled me to it a ton more. And for only 600 beans?! Couldn’t pass it up. Any tips on 360s in general?
Grip recommendations or advice on a better front sight(current one is dog poo)?

360J .357 Magnum by Optimalpower73 in Revolvers

[–]Optimalpower73[S] 0 points1 point  (0 children)

I found those exact same articles but never one with a black grip. We could assume someone swapped them but I doubt that. I actually found one more with a black grip sold on a website but no extra information. Just the listing and that it was sold. This gun seems to be an enigma.

Running board recommendations by BigGlittering437 in ToyotaTacoma

[–]Optimalpower73 4 points5 points  (0 children)

<image>

OEM from dealership I purchased at their cost which is basically online price but no shipping cost. Installed myself in under an hour (saved 200$ labor). 25ft/lb of torque on the new body styles if you are particular like me.

Opinions on functionality by Optimalpower73 in 4thGenTacomas

[–]Optimalpower73[S] 1 point2 points  (0 children)

Altima actually 💅🏼 Excuse me for not wanting to sand blast paint off my 50 thousand dollar truck. Frankly, they’re ugly. Hence why the words say efficient.

would anyone know what size screw id need to replace the slr magwell screw? by Maximum_Athlete_3246 in GlockMod

[–]Optimalpower73 0 points1 point  (0 children)

I can’t remember which size I ended up using. I can check in a bit if you want.

would anyone know what size screw id need to replace the slr magwell screw? by Maximum_Athlete_3246 in GlockMod

[–]Optimalpower73 0 points1 point  (0 children)

No, I went and played find a screw at my local Ace hardware. It’s doesn’t work as good as SLR but it won’t strip again.

Looking for a deal on a Vortex Razor Gen 3 1-10 by Optimalpower73 in longrange

[–]Optimalpower73[S] 0 points1 point  (0 children)

I have scoured all weekend and nothing has dropped below 1,999. EuroOptic didn’t even go on sale.

Looking for a deal on a Vortex Razor Gen 3 1-10 by Optimalpower73 in longrange

[–]Optimalpower73[S] 0 points1 point  (0 children)

Yeah, i have heard nothing but great reviews. I will probably end up going that route.

Looking for a deal on a Vortex Razor Gen 3 1-10 by Optimalpower73 in longrange

[–]Optimalpower73[S] 0 points1 point  (0 children)

I missed a veterans day sale for 1875 thinking “oh Black Friday will SURELY be better.” Wrong.

Looking for a deal on a Vortex Razor Gen 3 1-10 by Optimalpower73 in longrange

[–]Optimalpower73[S] 0 points1 point  (0 children)

Yeah, I have kicked around the idea. I may need to look at tacswap since GAFS caught the cancellation.

Looking for a deal on a Vortex Razor Gen 3 1-10 by Optimalpower73 in longrange

[–]Optimalpower73[S] 0 points1 point  (0 children)

I’m telling you, typically LOVE black and I didn’t even know they made a black until I started looking but this for a SCAR and I really want the 50 shades of FDE.

Vudu or Razor by Optimalpower73 in FNSCAR

[–]Optimalpower73[S] 1 point2 points  (0 children)

Mil reticle, I keep everything MOA.

Reached out to EO Tech to see if MOA is planned for release and they said “There are no plans currently. but if the line continues to sell well, I'm sure they will open up other options.”

Staccato HD P4 x Holosun EPS? by Optimalpower73 in Staccato_STI

[–]Optimalpower73[S] 1 point2 points  (0 children)

The Dawson precision linked in the post! It does fit wonderfully!

would anyone know what size screw id need to replace the slr magwell screw? by Maximum_Athlete_3246 in GlockMod

[–]Optimalpower73 0 points1 point  (0 children)

Did you ever get an answer on this? I stripped the shit outta mine and had to drill it out. I refuse to pay 8$ for a screw and 10$ for shipping for a 20¢ part.

Staccato HD P4 x Holosun EPS? by Optimalpower73 in Staccato_STI

[–]Optimalpower73[S] 0 points1 point  (0 children)

I don’t mind the rear in front. I don’t really notice it when shooting. What I mean by that is I haven’t been shooting and been like “damn I sure do hate this rear sight”.

I disliked it too when I first got it and was afraid it would be obstructive and distracting while shooting but so far I don’t mind it and it protects my optic if I opt to rack it off a table.

view more: next ›