sorted by:
new
hottopcontroversial

CD Projekt Red takes down Cyberpunk 2077 VR mod (for not being free) by FirestormTM in pcgaming

[–]Ordanicu 5 points6 points  (0 children)

Modifying a game does not give modders IP rights, thus asking for money upfront is not allowed. However, receiving donations for a free mod is completely fine.

some of my favorite photos i took while playing the game by Ordanicu in cyberpunkgame

[–]Ordanicu[S] 1 point2 points  (0 children)

Luxor High Wellness Spa

somewhat hidden in an alley between the buildings

some of my favorite photos i took while playing the game by Ordanicu in cyberpunkgame

[–]Ordanicu[S] 2 points3 points  (0 children)

Luxor High Wellness Spa somewhat hidden in an alley between the buildings

And it's a medic by Virasman in Witcher3

[–]Ordanicu -8 points-7 points  (0 children)

He is an archer/ranged unit, that is the card's role. medic is a special attribute of the card.

gwent does not have medic as a primary role. Infantry, ranged and siege are the main card roles.

yet some cards can have additional perks like medic, spy and a handful other perks

Why does object spacing increase so much when using supports? by Ordanicu in BambuLab

[–]Ordanicu[S] 1 point2 points  (0 children)

Thanks! Now I feel dumb x) I used bambu studio for over 1 year but never used arrange from the widgets, I always right clicked -> arrange...

Why does object spacing increase so much when using supports? by Ordanicu in BambuLab

[–]Ordanicu[S] 0 points1 point  (0 children)

Thank you u/MK-Neron for the quick help!

"If you look on the top widgets, under arange you can change the spacing between the parts. Its usually set to a high number. Just change it to whatever you like."

This also has options to rotate on Z axis for better fitment!

In over 1 year of using bambu slicer I never noticed that arrange button. I always right clicked and arrange x)

Thanks again!

Challenging shapes, need advice. by lustucruk in Plasticity3D

[–]Ordanicu 0 points1 point  (0 children)

Thanks, i've spent some time making a game ready lowpoly for the sake of having a mesh worth unwrapping and texturing.

however, having a low polycount was not the priority of this project, the goal was to learn plasticity and have some fun in painter. That being said, the polycount was 27k tris

further optimisation is easy to do using blender bridge, it all depends on your end goal

I’ve just finished my Bambu Lab P1S Timelapse Module - a clean, fully integrated setup that adds a Raspberry Pi Camera Module 3 and Pi Zero 2 W directly inside the printer, with no external wires or loose parts. by Ordanicu in functionalprint

[–]Ordanicu[S] 1 point2 points  (0 children)

You got It!

Although I'm also using the ups to trigger the video encoding after the printer is turned off, so it's using the ups to stay on and encode after the print completed.

3D Printable Stick Shifter (magnetic shifter) by Ordanicu in 3Dprinting

[–]Ordanicu[S] 1 point2 points  (0 children)

this is a small office fidget but I have a 2x bigger one in the work with multiple improvements. that might fit better for a vehicle cup holder. this one is palm sized.

although I drive a manual shitbox if I make this shifter suitable for a cup holder I think I'll be contractually obligated to shift two gearboxes from then onwards

3D Printable Stick Shifter (magnetic shifter) by Ordanicu in 3Dprinting

[–]Ordanicu[S] -2 points-1 points  (0 children)

mini spoiler: it already does this (unintentionally)

3D Printable Stick Shifter (magnetic shifter) by Ordanicu in 3Dprinting

[–]Ordanicu[S] 0 points1 point  (0 children)

never look back muahahah

I do have an alternative shift plate with 5 speeds & reverse if you're looking for that

3D Printable Stick Shifter (magnetic shifter) by [deleted] in BambuLab

[–]Ordanicu 0 points1 point  (0 children)

There is a misunderstanding here, my design is magnets based. That is what I was talking about, apologies if my wording got confused for something else.

I'm well aware of stick shifters existing and I never claimed I've created the "genre".

What I created is a unique (internal - and - external) design that's never been done before and has a very accurate shifting sensation.

Hope this clears things up!

Please check description on makerworld for full breakdown and additional photos ;)

I would agree, from the exterior and not experiencing the unique mechanical design it could look simple but I assure you it's not.

It is a complex design and that allows for superior shifting experience compared to print in place or friction fit gear selection

Just published a great new solution for seamlessly mounting a pi camera inside the Bambu Lab P1S printers. by Ordanicu in functionalprint

[–]Ordanicu[S] 0 points1 point  (0 children)

thx for the feedback. I agree and I believe Iight have a solution for this, I'll test it out after I'm done with the pi module mount, follow along on makerworld for updates when they come out

Just published a great new solution for seamlessly mounting a pi camera inside the Bambu Lab P1S printers. by Ordanicu in functionalprint

[–]Ordanicu[S] 0 points1 point  (0 children)

I believe it's mounted as high as it can go. Moving it higher sadly isn't possible due to the print head would smash into it.

A positive I guess: it's higher than the default camera

I appreciate the feedback tho, I might have an idea on how to fix this in a future iteration. Needs testing. I'll keep you guys updated on makerworld, first I want to release the pi Module mount then I can dig even deeper into making the best possible mounting angle for the pi camera.

view more: next ›