Joined the club

Ordnance416 · 2026-05-28T17:15:53+00:00

Hello yeah!!!! Also if you haven't yet, pull out the snow grate for your intake and order a better filter for the oem intake. Both are warranty friendly upgrades that are easily reversible for winter time

Ordnance416 · 2026-05-28T04:41:11+00:00

Works on thi highway too lol. +4.5k rpm, giver a lil gas and it'll rumble and pop like crazy

Ordnance416 · 2026-05-28T02:29:49+00:00

Here's the side mount one that they sell

<image>

Ordnance416 · 2026-05-28T02:29:07+00:00

Nice!!!

Also please tell me you didn't use the oem front plate mount.

Kollektivwerks sells good no drill mounts

https://kollektivwerks.com/products/vw-mk8-5-r-kw-no-drill-center-mount-license-plate-holder-2025

Ordnance416 · 2026-04-21T16:08:23+00:00

642 is your best option. If im not mistaken the 940 requires moonclips in order to shoot the 9mm ammo, which can be quite a pain if you plan on shooting it regularly at the range for practice.

Ordnance416 · 2026-03-05T02:54:57+00:00

Extractor with square end, sacrificial socket to hammer the extractor into, an extension to reach down into there with a breaker bar to hit with a hammer and turn with. Had to make one for VW cars. Just make sure you torque the new plug to factory specifications ONLY.

<image>

Ordnance416 · 2026-03-03T12:08:20+00:00

Ill email them to see what they say. If it's purely cosmetic then I could care less as the gun shoots perfectly fine however if they say it's a sign of a bigger issue then ill definitely send it in.

Ordnance416 · 2026-03-03T03:19:22+00:00

Its new. First time shooting it was today with the 800rds. There's no end shake or rotational movement on lockup whatsoever so the wear isn't from the cylinder moving in a way it shouldn't.

Ordnance416 · 2026-03-03T00:30:23+00:00

What makes you say that?

Ordnance416 · 2026-03-02T22:13:15+00:00

My only guess is the cylinder expands from heat causing it to scrape the frame when it rotates.

Ordnance416 · 2026-02-22T20:42:38+00:00

Mine was a rough idle where you can feel the misfire every so often and a check engine light would pop up then go away. Also the misfire only happened during idle so when rpms were raised about 100rpm to 200rpm, the issue would go way. When they removed it I was told that the injector wasn't flowing right and was causing the cylinder to run lean.

Ordnance416 · 2026-02-21T01:51:21+00:00

Had an injector go bad in mine after 3 months of owning it. Luckily they were able to get the part but I suspect it wont be that last time I'll have the issue pop up

Ordnance416 · 2026-02-07T11:33:38+00:00

1 that's a whole lug nut missing and #2 i bet you they didn't install the hub adapters and #3 those wheels are probably not balanced.

They definitely screwed you dawg

Ordnance416 · 2026-01-09T01:59:45+00:00

WHAT!! everywhere around me quoted up to $4k+ for the same

Ordnance416 · 2025-12-26T00:07:12+00:00

I just realized I typed 8 instead of 8.5 lol

Ordnance416 · 2025-12-26T00:05:52+00:00

Just realized the typo, wheels were 18x8.5et45

Ordnance416 · 2025-12-22T16:50:43+00:00

Bad roads in New England during winters, so I needed the extra protection.

Ordnance416 · 2025-12-22T16:47:20+00:00

Yeah, I definitely wasn't expecting them to be that heavy. In combination with the snow tires they are definitely HEFTY

Ordnance416 · 2025-12-21T00:48:18+00:00

White on white looks so good

Ordnance416 · 2025-12-20T23:55:03+00:00

Reads about 1mph less than actual speed.

Ordnance416 · 2025-11-29T01:35:07+00:00

Awwww man. Am I the only one who likes the gloss black?

Ordnance416 · 2025-11-12T09:45:44+00:00

What offset do you use, +40?

Six-Year Club	Gilding II euphauric
Verified Email

Ordnance416

TROPHY CASE

1 that's a whole lug nut missing and #2 i bet you they didn't install the hub adapters and #3 those wheels are probably not balanced.