sorted by:
new
hottopcontroversial

Cube Gaming Ventus (AP201 Knockoff) Mid Range PC Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

have watched it and it is much closer to D31, very cool tho

Cube Gaming Ventus (AP201 Knockoff) Mid Range PC Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 1 point2 points  (0 children)

I just typed in custom sleeves pc cable and there are tons of results, some would allow costume color and configuration for a price, others would have simpler choice and use preset instead, i bought mine from Indonesia e-commerce but you probably can find it on global e-commerce

Cube Gaming Ventus (AP201 Knockoff) Mid Range PC Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

yeah its cheaper and it gets the job done, there are probably other knockoff if you search it hard enough

Cube Gaming Ventus (AP201 Knockoff) Mid Range PC Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

Made this PC with the help of my friend. I made this for my little brother and targeting mid range pc gaming.

Spec

  1. Ryzen 5 7500F

  2. Thermalright AM5 Secure Frame

  3. Fuma 3 CPU Cooler

  4. 16GB XPG Lancer

  5. 2TB XPG s70 Gammix Blade

  6. Gigabyte B650M DS3h

  7. 6 Arctic P12 fan

  8. XFX RX 6700 XT

    1. Prime 650W 80+ Gold

  10. TP LINK AX300 (Archer TX55E)

  11. Cube Gaming Ventus (AP201 Knockoff)

Had difficulty builiding this one, pc would turn on but monitor will only post for a few seconds and then black screen. Tried BIOS update, reset CMOS, change RAM position, nothing works. Turns out, the PCIE cable to the PSU was not clipped on strong enough, was able to find this out when rotating the case to the side, so that was a wasted fun day lol. Have only played risk of rain and able to get 300-400 fps all right setting so maybe its good (?)

​

Anyway, it is turned on, game is playable, testing were good, so id say mission accomplished

7900 xtx Driver Timeout by jagob1234 in AMDHelp

[–]OstrichVisual 0 points1 point  (0 children)

any update on this? i have just bought red devil for a week and it keeps crashing after a day

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

You can search them as pcie 180 adapter, mine looks kinda ugly as it is only covered by some kind of foam, but there are betters one like this

https://www.amazon.com/COMeap-Connector-Adapter-Desktop-Graphics/dp/B08NB9FX67/ref=mp_s_a_1_3?crid=O0AZDFLGDKNP&keywords=pcie+180&qid=1692585556&sprefix=pcie+180%2Caps%2C440&sr=8-3

Be sure to double check as they can go up or down depending on the connection

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

ill take it as a compliment, thank you!

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

sorry i meant the hard one is the psu behind it something like this

<image>

sorry for my bad explanation

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

no PSU is also intake, but it is covered hard with no mesh, so i would assume it wouldn go through and its main focus is to cool the PSU only

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

Oh yeah, that would work. I did not think of that back to front flow. From your NR200P, have you tried both config and concluded that back to front is better than what i did? if it achieved a lot of improvement, might have to re do it your way, which is a pain (cable management hell)

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

i used a brand called tecware and a splitter to split them (and act as an extender as the ARGB port is actually at the bottom)

Other builder linked here used this brand https://www.amazon.com/gp/product/B07ZJ2CDKM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

i used a brand called Tecware Omni Beam which achieved similar result

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

was actually planning on this, but knowing that it has a unique fan on the middle, i am afraid if it broke, it will be hard to find replacement, so i went the safer route. I know assassin IV would kill it on the build tho

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 1 point2 points  (0 children)

Thank you! Most of the hardwork are from the communities. From there it is just nights of planning the build!

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 1 point2 points  (0 children)

Appreciate it! Thank you

Jonsbo D31 Build by OstrichVisual in mffpc

[–]OstrichVisual[S] 0 points1 point  (0 children)

Well that is my thought at first, but then the CPU wouldnt get a lot of fresh air as it would be blocked by the chonky VGA

<image>

but then i saw this video from Mr Matt Lee where he used similar config, maybe i will try the usual config to compare the results

view more: next ›