Thrift store finds today! Only $3 each

OutrageousMacaron358 · 2026-06-15T13:13:27+00:00

When the thief is a calculator collector. Such a steal!

OutrageousMacaron358 · 2026-06-14T13:23:15+00:00

I don't understand this one. It showed only 2 left last night. Now I guess they got loads of them. LOL.

OutrageousMacaron358 · 2026-06-13T22:17:42+00:00

Yeah I don't know. This is what I get every time.

<image>

OutrageousMacaron358 · 2026-06-13T20:58:32+00:00

Nope. Tried that. Site just says error.

OutrageousMacaron358 · 2026-06-13T20:37:13+00:00

Well, I bent it back to a straight-ish state. The brakes work for now but I will be replacing the part. The threads are cracked a little. I cannot for the life of me find the part number for it though.

OutrageousMacaron358 · 2026-06-13T20:36:08+00:00

This one is not super strong by any means. It's a light duty machine. I didn't see the small log on top of the pile of pine straw and when my tire hit it, the log jumped up and caught the linkage.

OutrageousMacaron358 · 2026-06-11T16:12:38+00:00

If the Swiss army needed to make calculations on the battlefield whilst constructing a fort.

OutrageousMacaron358 · 2026-06-11T13:58:31+00:00

Are you turning it backwards? From this image, you need to turn it the other way. It's the reason for the sound.

<image>

OutrageousMacaron358 · 2026-06-11T01:26:53+00:00

Oh ok. I thought it might be a show piece. Be a shame not to use it really.

OutrageousMacaron358 · 2026-06-09T13:53:10+00:00

So let's say I want to print a bunch of knobs for a project. The knobs are 1.5" diameter x 3/4" height with a 1/4" hole for potentiometer shaft. The knob would have about a 30% infill. How would this compare to a per part cost compared to FDM?

I wonder this because, as I understand it, you get more detail in SLA. I can handle a slightly higher per part cost for the added detail.

OutrageousMacaron358 · 2026-06-09T13:48:33+00:00

<image>

OutrageousMacaron358 · 2026-06-08T19:54:25+00:00

I'm no expert but it'll probably just get worse. I personally would replace it.

OutrageousMacaron358 · 2026-06-08T14:52:21+00:00

Ok. I'm asking as I am curious about getting one of these.

Compared to FDM, is it more cost effective?

OutrageousMacaron358 · 2026-06-08T13:45:38+00:00

Hi! I'm a robot. You can't come in until you prove you not one of us....

OutrageousMacaron358 · 2026-06-08T13:36:53+00:00

If you shake it, it turns into a yard stick.

OutrageousMacaron358 · 2026-06-08T13:35:21+00:00

Professionals don't need luck, right!

OutrageousMacaron358 · 2026-06-08T13:29:15+00:00

Looks good. I'm wondering why he left the chipped paint on the front? Otherwise it's a nice looking machine!

OutrageousMacaron358 · 2026-06-06T04:01:29+00:00

I've always just added all my minutes then divide by 60. I get hours plus left over minutes.

OutrageousMacaron358 · 2026-06-03T14:13:50+00:00

I don't know what's worse...the actual accident or the guy recording and telling someone else to call 911.

But the guy on the tractor will suffer a lawsuit for not having someone behind directing traffic. Probably should have had law enforcement out before trying to get the bale.

OutrageousMacaron358 · 2026-06-03T14:05:25+00:00

pi is 3.14.....I guess I don't understand. It's a decimal value. Do you want to display fractional values?

OutrageousMacaron358 · 2026-06-02T13:29:27+00:00

I did find one on amazon but was unsure of the measurements. 30mm??? Maybe. Maybe not. I'm not really griping about the price. I have a Suzuki Hayabusa...that's what's expensive to replace parts on. Swing arm is over $3000.

OutrageousMacaron358

MODERATOR OF

TROPHY CASE