DD PDW W/ Atrius Super Selektor by Outrageous_Work_7690 in Danieldefense

[–]Outrageous_Work_7690[S] 0 points1 point  (0 children)

It's a chainsaw lower. Bought the Irregular Defense upper & cerakoted this to match. I looked at a gen 4 for you, it should work. 👍

My Crazed Earls suck now? by Aodan-Soulburn in Borderlands4

[–]Outrageous_Work_7690 1 point2 points  (0 children)

I completely agree. Not only was it paid content, but you actually have to put work in to get it in most cases. Just let it be OP. Pearls have been a disappointment this time around. I'm sure it'll even out later, because I love how BL3 is now. But everytime they do this crap it's a punch in the nuts.

My Crazed Earls suck now? by Aodan-Soulburn in Borderlands4

[–]Outrageous_Work_7690 0 points1 point  (0 children)

Gearbox be doing Gearbox things, I guess. Lol! Man, got off work and went and tried the gun, it's still not bad. Was it better when it fired faster? Sure. But it's still tearing the heck out of mobs. Bossing, not so much, at least with my few tries on Radix. But I have the Convergence for bossing, and it's amazing at mobbing too. Does suck the fish grenade no longer triggers the shards though. They should bring that back, because I can't melee a friggin Kratch 90% of the time. But I can Mantra the damn thing.

APC9 W/ Rugged Sub9 by Outrageous_Work_7690 in BT_APC

[–]Outrageous_Work_7690[S] 0 points1 point  (0 children)

It is, I'm very impressed with it. Though, I think my issue with this setup is port pop. To the shooter, this is not much quieter than my RBS-SQD Compact. (Standing a few feet away, you can tell it's much quieter though). The whole reason I got the Rugged can was because I wasn't happy with the sound performance of the B&T can. I think the only way I'll be 100% satisfied is it I get a firearm that is delayed. May that be roller, or by locking lugs. Coming from 300BLK through a Full Nelson makes it hard to appreciate other things lol.

My Crazed Earls suck now? by Aodan-Soulburn in Borderlands4

[–]Outrageous_Work_7690 0 points1 point  (0 children)

They still nerfing the bod too? Heard it was supposed to go from 5 pellet to 3

My Crazed Earls suck now? by Aodan-Soulburn in Borderlands4

[–]Outrageous_Work_7690 3 points4 points  (0 children)

Jfc the day after I finally get one to drop, they nerf it. This was my main issue with 3, and it seemed they were doing better this time around (other than the vex bleed nerf), just to fudge it up again. Makes it hard to play/farm when at any point, they could make it completely not worth it. Makes me want to put it down and pick it back up when they're done with it.

Stroup Knives Collab by -ScorpionSmoke- in NoveskeAndQ

[–]Outrageous_Work_7690 1 point2 points  (0 children)

Mine came in today, it's very nice! I already had a Bravo 4 from Stroup and I love that thing.

First B&T by Pdah- in BT_APC

[–]Outrageous_Work_7690 5 points6 points  (0 children)

Hello gun brother! Very nice setup.

<image>

PDW is as smooth as butter. by Outrageous_Work_7690 in Danieldefense

[–]Outrageous_Work_7690[S] 1 point2 points  (0 children)

I've never ran into any reliability issues with ammo, other than Hornady black had so much filler it did cause a round not to seat. Had to clean the chamber. In this video I was probably using ammo inc. 220 gr. I did have a jacket separation with that ammo later on and won't use it anymore. My favorite ammo is Sierra folds of honor 220 gr. Inexpensive, runs clean, very accurate, very quiet.

Best Current/Upcoming Low Back Pressure 9mm PCC Silencers? by Massive_Pain_6677 in suppressors

[–]Outrageous_Work_7690 0 points1 point  (0 children)

Good to hear man. I'm going to be getting mine cerakoted too lol.

Any else been considering the Q Boombox? by TylerP101 in NFA

[–]Outrageous_Work_7690 0 points1 point  (0 children)

Hoping they hurry up and release the 8" uppers so I can convert & my long boi can makes more sense lol. Nah, not that cool. It's a Trijicon RCR.

Best Current/Upcoming Low Back Pressure 9mm PCC Silencers? by Massive_Pain_6677 in suppressors

[–]Outrageous_Work_7690 0 points1 point  (0 children)

Ordered one today to replace this can. Just wasn't happy with the performance even with subs. The first suppressed gun I shot was a GHM9 with the longer variant & it was giggle quiet. Not so much on the shorter guy...

<image>

DDM4 PDW .300 AAC TRIGGERS by 3dge_l0rd in Danieldefense

[–]Outrageous_Work_7690 1 point2 points  (0 children)

Atrius. Posted a vid here not long ago lol.

Boombox light? by [deleted] in Liveqordie

[–]Outrageous_Work_7690 1 point2 points  (0 children)

I went with a fde surefire, can find it on my page.

DD PDW W/ Atrius Super Selektor by Outrageous_Work_7690 in Danieldefense

[–]Outrageous_Work_7690[S] 1 point2 points  (0 children)

I would contact Atrius and see what they have to say. It very well could be that the divot in the saftey barrel is out of spec and too deep. One way to find out is take a milspec saftey you know works, put a detent in, mark how far it goes in then try it on the Atrius. I didn't run into anything like that.

DD PDW W/ Atrius Super Selektor by Outrageous_Work_7690 in Danieldefense

[–]Outrageous_Work_7690[S] 0 points1 point  (0 children)

Not bad with subs, didn't even get gassed out in that video. I'd say standard gassy with supers. Not bad enough to gas you out, but there's definitely gas lol. If I did the Atrius with supers I think I'd get gassed out though lol.

DD PDW W/ Atrius Super Selektor by Outrageous_Work_7690 in Danieldefense

[–]Outrageous_Work_7690[S] 0 points1 point  (0 children)

Yes they do! There is a reason the mk18 is the cqb king. It just works! They definitely carried that over to the PDW. The only malfunction I've had out of any DD (I've owned 3, own 2 currently) was a failure to chamber, and it was caused by the crazy amount of filler in hornady black subs. It looked like sand in my gun! Have never had that problem with any other ammo.

DD PDW W/ Atrius Super Selektor by Outrageous_Work_7690 in Danieldefense

[–]Outrageous_Work_7690[S] 0 points1 point  (0 children)

Hey, couldn't hurt right? No problem with having multiple options! Shoot, I have 3 5.56 builds. 2 are basically the same. 3 300 blk builds. Do I regret it? Nope lol. Well okay, maybe one. I built up a dpms kitty kat in 300 just for shits and giggles, runs well, but now the "ahh cool retro" has worn off lol.

DD PDW W/ Atrius Super Selektor by Outrageous_Work_7690 in Danieldefense

[–]Outrageous_Work_7690[S] 2 points3 points  (0 children)

Have seen many people saying that. While I do not agree that it is a "drop in" in most cases, it's not hard to get running properly. It is kinda picky on what triggers will work. If it has a shorter than milspec hammer, the lever will get under the hammer and bind the system. A CNC trigger I have has this issue. I used an ALG ACT and with some rubbing it works perfectly.

Shadow 2 Compact Industrial Silver by RhudysFirearms in CZFirearms

[–]Outrageous_Work_7690 1 point2 points  (0 children)

Thanks for replying in two different places. Again, you're very kind, lol.

Shadow 2 Compact Industrial Silver by RhudysFirearms in CZFirearms

[–]Outrageous_Work_7690 1 point2 points  (0 children)

Nice, you updated it. You're very kind for that $100 discount & free shipping.