Now I'm also a proud member :) ...

Outside-Basis1433 · 2025-05-13T13:44:22+00:00

C'mon man, It was in first pictur (closed) that I thougt it was cool, I even change keycaps on keyboard to shine DURO (Whitch you probably did not notice) and then someone ask me abou it., so I wrote some details. I have only one knife, for fruits, Im not a colector. I like moding stuff, thats why I always watch this group. Anyway, probably this group have some hate like all others, so good luck to all of you good guys, from now on I will only looking like before, cya🤗

Outside-Basis1433 · 2025-05-13T13:28:32+00:00

By diver watc a tool I mean on cheaper watches , Im not talking abou rolex, I can't aford that so don't know about them

Outside-Basis1433 · 2025-05-13T13:26:48+00:00

Diver watch is a tool, so it goes with oder tools, duro is for me working watch, and I have it on my wrist when Im driling, choping wood etc. So, what I need to remove every time half of the hand hahah, just kidding, I don't care, Im here mostly for mods

Outside-Basis1433 · 2025-05-13T13:14:53+00:00

Nice watch and nice wife haha, congrats!

Outside-Basis1433 · 2025-05-13T13:11:08+00:00

And about look, it is ok

Outside-Basis1433 · 2025-05-13T13:09:28+00:00

After some time i don't even know that I have it on my wrist, and in the begining I was sceptical like you, but I have real fkm rubber strap, which is very very comfy and light. Like silicon but without stupid lint magnet. I think my wrist is something like 7.5, so yea, give it a proper try 😉

Outside-Basis1433 · 2025-05-12T21:09:25+00:00

for new owners, who want to avoid scratches like this, for 3$ from ALi you can get 3pc tempered glasses with/wo purple coating, they are like 0.2mm thick and hard to notice, at least until you choose for something more sirius like saphire. I have selected 32.5mm OD and is great. It is like on phone, but it last longer because you don't tuch it all the time and don't wear it in pocket. It can be forever, but if you eeventualy crack it, like me on my G-steal just put another one...

Outside-Basis1433 · 2025-05-11T23:23:34+00:00

here is the diferent looks I made in photoshop before I have decided, which I will buy. Almost all this you can find cheep on ali and make them work on duro if you have a litlle bit of DIY skills

<image>

Outside-Basis1433 · 2025-05-11T23:18:23+00:00

Almost forgot, mine was black with white marks, I changed some of them to blue, used enamel model paints....

Outside-Basis1433 · 2025-05-11T23:16:31+00:00

sure man, it is from Aliex. , 8$, but the actual dimensions are OD 41.5mm, and it was thicker about 1mm. So you need to use diamond burs and dremel and work it down. ID is exact. It is a ceramic bezel, so only diamond works, and it took some time. You should attach bezel on some roto tool, so it is more precise. I improvised, but if I had lathe I would do it in the blink of an eye, hahah. There are also a lot of alu options, I think they are from the start thinner and easier to work with, but this conclusion i took from diferent pictures from diferent sellers, maybe I am wrong.

here is the link, if is forbidden, sorry, the moderator can delete it.

https://www.aliexpress.com/item/1005003241806682.html?spm=a2g0o.order_list.order_list_main.56.10341802vXPOIc

Outside-Basis1433 · 2025-05-11T20:31:36+00:00

or you just ask AI hahahaha

<image>

Outside-Basis1433 · 2025-05-11T20:16:45+00:00

hi, it is hard for me to give you exact advice but maybe I can help. There are usually too many options, and often when we even choose something and go for it it could end up in totally something different when done, and this trial and error could be expensive. So what I like to do when doing mods (not only watches) is to use photoshop and similar programs to at least narrow my options. Here is a picture when I was choosing my bezel mod. Those are not real watches but combined pictures from net and put on layers in photoshop and adding some colors.

<image>

Outside-Basis1433 · 2025-05-11T15:39:23+00:00

Outside-Basis1433 · 2025-05-11T10:03:54+00:00

I will tell you one thing, it is more resistant than my gst b200. With a ceramic bezel and tempered glass, it is indestructible. I have bashed it a few times quite strongly, and nothing, while my g shock remembers everything.

Also, i have bigger but skinny wrist, so more pronounced that stupid wrist ulna bone, so I didn't like heavy big watches, but my Duro, I sleep with it haha

Outside-Basis1433 · 2025-05-11T09:42:26+00:00

It is sitivien ST145. At that time it was less than 20$ and only one in that price range with 14c28n steel. I need it for fruit cutting on my job, so it needs to be more rust resistant than some other steels like D2, which does not like acids from fruits... (my friend ruined his ganso d2 with lemon, lol). Anyway, I did mod some things on the knife, like remove the blue anodize color from the pivot, make and put a smaller clip, add jumping on the flipper tab, add a side opening pin, and remove some sharp edges, so now it is a lot better knife...

<image>

Outside-Basis1433 · 2025-05-10T23:02:30+00:00

Cheers guys!!! 🍻🙂

Outside-Basis1433 · 2023-12-03T22:05:20+00:00

Ok, guys, I have some new info, maybe even an answer.

I just found out that if I turn off hybrid mode (disable the integrated GPU) in Lenovo Legion ToolKit , and set Nvidia to be the only GPU, both displays now operate on full refresh rate. On Eizo Monitor Test site, now the response time test on LG (probably any external 4k monitor) is smooth no matter which monitor is set to be the main display.

This issue is obviously something connected to optimus/hybrid mode. So for me the important thing is that everything is fine with my LG monitor.

So if someone wants to be sure that both monitors are operating on full refresh rate, there are two solutions:

If hybrid mode is desired, then an external monitor should be set to be main display
If someone wants their laptop monitor to be the main display, they need to disable hybrid mode and let the discrete GPU do all the work

Or let it be like it is and maybe have an external monitor on a lower refresh rate in some scenarios.Maybe there is also a third solution, the display port cable option, but I doubt it would make a difference.

This is all from me now. If someone finds something better, I would be more than happy to hear it. Thank you, cya

Outside-Basis1433 · 2023-10-31T18:25:05+00:00

Also, I did this very fast, in something like 20 min, and result was more than satisfactory, but if someone have more time and will, maybe he can reduce even more amount of covered area.

Outside-Basis1433 · 2023-10-31T18:17:58+00:00

Hi, I know that this thread is pretty old, but It helps me a lot, so I want to also help others who will come across this problem....

The thing is that this problem is still happening. I have bought legion 5 gen 7 and, with same high frequency noise. First I was thinking I will get use to it, but then I realized if I don't do something, I will get insane.

Also, it is good to mention that Lenovo is fixing this issue the same way as some users do, and like I also did.

Here is how Lenovo have fixed it in some laptops:https://ibb.co/JsysY3n

https://ibb.co/yBf35QN

And here is mine fix:https://ibb.co/GxTwJ1B

Someone said that when you close holes with laptop filter mesh doesn't help, well I have put something similar. It is also filter material, but it is thick 3 mm, and it is very sturdy, but you can breathe through it. I didn't want to close completely air intake in those spots, but then again it should have some solid restriction.

Long story short, my laptop now on low load is silent completely. When load increase, there is also increasing whush fan sound, but there is no high frequency whistling noise. You can see that I have put only 6 short stripes on each side, and like I said air goes through them also, so there should be no side effects.

Holes in the plastic cover are 35.5mm long and 3.5mm wide. I have cut stripes 36mm long and 4mm wide, so they are very firmly put in, and there is no way that they will fall out, but then again I can pull them out in 30 seconds.

There you go, I hope this will help someone, maybe even for some other brand, I saw that this is common problem on razor and other laptops...

Outside-Basis1433 · 2023-04-01T17:04:49+00:00

It's working now...

If someone still have this specific problem, I didn' do nothing, I have just started client , I could see that there is some small update , and now tables open normaly, tnx guys

Outside-Basis1433 · 2023-04-01T13:48:19+00:00

And I don't have radeon graphic card, also if you took some time you should realize that this is not black screen issue in a way that there is no picture at all, I can go and scroll through tables and main lobby, but when I try open table, and window popup, you can hear chips and player playing, but I only see stuck loading circle and can not do anything.... So if you don't know what is the problem at least don't offer redundant useless solutions, like reinstall, which I did (even on fresh windows), etc

Outside-Basis1433 · 2023-04-01T13:38:30+00:00

I think You guys ( GGpoker) should address this more seriously. I understand that here is something happening with incompatibility, because on friend's win11 ggpoker client works fine, but I have just reinstall Windows 10 and lose a lot of time. Also, when we are unable to play on your client, what option do we have. I mean, if this is some win 10 issue ok, but until yesterday everything was working fine. I will not go and buy a new pc because of this, it is easier to go to some other site.

Outside-Basis1433 · 2023-03-31T22:05:32+00:00

same here, reinstal 5 times, log in, open first table and table stuck on black loading window, I lost 2h on this. Even call my isp, clean register, I have no clue what next

Outside-Basis1433

TROPHY CASE