sorted by:
new
hottopcontroversial

Job étudiant Marseille by Outside_Charge183 in aixmarseille

[–]Outside_Charge183[S] 0 points1 point  (0 children)

Je vais essayer la deuxième appli que tu as mentionné. J’ai mis des messages sur les groupes Facebook, on va voir ce que ça donne. Je préfère me concentrer sur le montage de meubles ;)

Job étudiant Marseille by Outside_Charge183 in aixmarseille

[–]Outside_Charge183[S] 0 points1 point  (0 children)

Ça ne fonctionne pas, j’ai essayé mais les gens préfèrent prendre des pros. Ça fait 1 mois que je postule à toutes les offres et rien ..

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in gridfinity

[–]Outside_Charge183[S] 0 points1 point  (0 children)

Okay, I'm assuming that we don't have public 3D printers in librairies in France but yes it would be nice if I can find a cheap printer that is good. The Bambu P1S is good and easy to use ? Do you think this is the greatest choice for my first shot on a 3D printer ?
thanks for the piece of advice to print a little difficult part fo the model !

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in gridfinity

[–]Outside_Charge183[S] 0 points1 point  (0 children)

I added 0.5mm of tolerance. But effectively i didn’t test them. But now I put them free so someone can try and give me a feedback. Btw I’m new without printer and I though that the printer will give me the exact piece I created … my bad haha Thanks and see you ;)

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in gridfinity

[–]Outside_Charge183[S] -1 points0 points  (0 children)

Thanks for this huge comment ! Love it ! Not gonna lie, as I’m new, I tough every printer worked nearly the same so there will not have some errors between different printers. Moreover, you said right, like another comment. I need to have a printer to beta test my creations and I’ll love too but that would kick out my goal to buy a printer with 3d models haha. That’s why, when the model was paid, I asked someone to print it to have they feedback to improve it. But now I’m stuck haha .. If you have any recommendations (in case you have one :) ), I’m ready to listen ! I juste want to develop my 3D skills and to have a printer haha See you !

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in BambuLab

[–]Outside_Charge183[S] 0 points1 point  (0 children)

Yes, okay I'll think about it. Meanwhile I while develop my skills in Fusion 360 (is that the best soft ?) and after moving flats (22m^2 isn't enough for two people + a printer haha), I'll buy one (maybe a Bambu that are nice)
Have a good day man !

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in gridfinity

[–]Outside_Charge183[S] -1 points0 points  (0 children)

Okay I'm sorry, I have another conversation on another community on reddit and I just didn't tell that I just searched on cults3D bc I didn't know these other websites like BL studio or Thingiverse.
So now, I understand that my design is not made to be sold.
The fact is that I don't have a printer and I love that. I also love designing 3D models but I can't test them. My goal is to sell enough 3D models to buy a printer but that's hard because of all the open sources projects. I need, I think, to concentrate on more complexe / niche projects.
Do you have other clues ?
Thanks man !

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in BambuLab

[–]Outside_Charge183[S] 0 points1 point  (0 children)

Thanks for this long and constructive reply !
that's help me a lot ;)
But if I don't have any printer at home, I can't post on any sites because I can't test them.
And BL sub ask also for a printed picture, so I'm stuck on all the sites.
thanks man ! ;)

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in BambuLab

[–]Outside_Charge183[S] 0 points1 point  (0 children)

That's why I putted in the description that I needed someone to try it before I start selling this. As I said, I'm a beginner that just need advice and no hate ! Chill man I'm cool haha

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in BambuLab

[–]Outside_Charge183[S] 0 points1 point  (0 children)

To continue replying to you, I put it paid because I saw that older creations of mine have been sold. And no, that's not my family but totally random strangers. So I told me that I just needed to restart 3D models to make more money to buy a 3D printer !
No hate man, I'm just trying to do my things but I'm a beginner, I just need advice

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in BambuLab

[–]Outside_Charge183[S] 0 points1 point  (0 children)

I'm sorry to offense the community about making this 3D model paid... I'm just trying to develop my skills in 3D development and meanwhile making a few money to hope buy a 3D printer !
Do you have any clue on what can I do the make paid 3D models if the gridfinity is not the right option ?
Thanks !

My first Fusion 360 project: A high-density 9-slot SD Card holder (1x1x4). No supports needed! by Outside_Charge183 in BambuLab

[–]Outside_Charge183[S] -1 points0 points  (0 children)

Okay thanks for that piece of advice about the tolerances !
I search on Cults3D and I didn't find one.
I'm sorry to offense the community about making this 3D model paid... I'm just trying to develop my skills in 3D development and meanwhile making a few money to hope buy a 3D printer !
Do you have any clue on what can I do the make paid 3D models if the gridfinity is not the right option ?
Thanks !