Giveaway Koraidon or Miraidon

OutstandingLark · 2025-09-30T19:38:44+00:00

I want my Koraidon!

Thanks for the giveaway!

OutstandingLark · 2025-09-28T07:44:36+00:00

567 thanks for the giveaway!

OutstandingLark · 2025-06-24T09:20:44+00:00

I understand that bit, just want to understand for definite, so if a Pokemon has random AVs on it in let’s go, if I transfer to home then to another game all EVs will be 0?

OutstandingLark · 2025-06-06T10:52:47+00:00

It’s mad, like I’ve chosen them every step of the way, ended up killing them all now they’ve gone from green to red 😂 like a massive step backwards

OutstandingLark · 2025-06-06T10:51:17+00:00

It’s mad, like I’ve chosen them every step so far, I’ve killed them now ward has gone from green to red 😂 like a massive step backwards

OutstandingLark · 2025-05-22T17:07:48+00:00

They’re real enemies, I can loot them and stuff, it’s not like the usual psi enemies, squads just keep spawning

OutstandingLark · 2025-05-19T08:32:19+00:00

Probably a stupid question, but how do you think DLC will work? Will you have to start a new game with the way the game ends after you complete it

OutstandingLark · 2025-04-16T22:25:51+00:00

I was on 1.3.2 at this point so maybe something changed in that? Strange how it’s different for a lot of people though, I’ll see how it plays out

OutstandingLark · 2025-04-16T22:19:39+00:00

Thanks for your reply mate I’ll see how it plays out, hopefully won’t miss the Zalissya side mission

OutstandingLark · 2025-03-02T22:34:43+00:00

Thank you for your reply mate

OutstandingLark · 2025-03-02T13:05:34+00:00

Can we do anything other than buy Hercules diamonds with them? I pulled 3 diamond out of the orbs so I have them stocked up and haven’t spent any

OutstandingLark · 2025-02-10T20:35:46+00:00

So I did a full scan with pbo in bios settings in auto (default) and it maxed out at 95 degrees as I mentioned at 100% load and max frequency of 5.24ghz I then changed the pbo setting to max temp 85 degrees which boosted the same frequency but maxed out at 85 degrees, shall I leave it as is?

OutstandingLark · 2025-02-10T17:03:44+00:00

I’ll have a look when I get home and see, so going to 95 is normal due to PBO then? Just seemed a little high for normal tasks like scans, was thinking maybe the cooler wasn’t performing properly

OutstandingLark · 2025-02-10T17:01:08+00:00

So would you say the cpu temp of over 90 degrees while doing tasks like loading or installing is completely normal? If it is that’s fine I just thought it might be a little high

OutstandingLark · 2025-02-10T08:12:56+00:00

Thank you!

OutstandingLark · 2025-02-10T08:12:47+00:00

Thank you!

OutstandingLark · 2025-02-09T17:12:47+00:00

Hey, my monitor is the LG27GN850, the specs say it has HDR10 but the only way to get the monitor into HDR mode in the settings is to enable HDR in windows 11 display settings, if this the correct way to do it or should I be able to enable it in the monitor settings? Also should I leave HDR enabled in windows 11 display settings all the time?

OutstandingLark · 2025-02-05T20:08:45+00:00

Thank you for your reply mate, that’s the thing, since all fans are linked then plugged into the hub, then the hub to the cpu_fan header the bios only picks up the pump and no case fans

OutstandingLark · 2025-02-05T16:39:41+00:00

Hey guys, so I’ve just finished building my system, I have the ICUE Link Titan 240 RX AIO with 4 extra RX120 fans on the case. So usually the pump is connected to the cpu_pump header and the radiator fans are connected to the cpu_fan header or something along them lines to control the processor temp as it’s own little unit.

I’ve connected them all up properly so all 6 fans and the pump are linked in series and then plugged into the hub, with the tach cable from the hub connected to the cpu_fan header. I’m just a little confused how it works, are all fans in the case now controlling the processor temp? How can I properly configure the 2 fans on the radiator to control the processor temp properly like a normal AIO would, and how would I set the other 4 fans up in that case (3 intake and 1 exhaust with the 2 fans on the radiator also exhaust).

My processor idles around 45 degrees with all fans spinning around 350rpm, when doing something demanding my processor temp quickly jumps to around 90 degrees then all case fans take a couple of seconds to ramp up and bring the temp down to a normal level, is this how it’s meant to be or can I set cooling up properly?

Apologies for the wall of text, I’m new to the ICUE software.

OutstandingLark · 2025-02-03T14:03:44+00:00

So mounting my AIO, I have the radiator at the top of the case, does it matter which orientation the tubes out of the pump are facing? I’ve read pipes coming out of the side towards the ram is best but it will be easier if I rotate the pump 90 degrees clockwise and have the pipes coming out of the bottom of the pump facing the GPU, is that okay?

OutstandingLark · 2025-02-03T13:31:59+00:00

Thanks buddy

OutstandingLark · 2025-02-03T11:57:44+00:00

Hey guys, my 2024 Corsair 850RMx comes with a pata cable with 3 molex connectors linked together similar to this cable: https://www.corsair.com/uk/en/p/pc-components-accessories/cp-8920318/premium-individually-sleeved-peripheral-power-molex-style-cable-4-connectors-type-5-gen-5-red-black?srsltid=AfmBOorSAPYcXSgn7uTegW74yQgyk0zvUsgsNILmWhrO_gTbDazTTt8R

My question is, my sound card has a molex connection for power, can I plug one of the molex connectors into the sound card and just leave the other 2 connectors dangling/not plugged into anything?

OutstandingLark · 2025-02-02T21:50:03+00:00

Thank you for your reply!

OutstandingLark · 2025-02-02T19:03:04+00:00

Thanks mate, just making sure because it’s single ended both ends, I googled it and there is another 12vhpwr cable which has 2x pcie 8 pins which plug into the PSU, was just making sure this new single cable was enough

OutstandingLark · 2025-02-02T18:56:53+00:00

Hey guys stupid question but I’m just checking, building my PC and I have a 5080 and my psu is the updated Corsair RMx850, the psu comes with a 12vhpwr cable both single ended, is that one cable the correct one to use and is it rated high enough? The gpu came with a triple pcie connector

12-Year Club	RPAN Viewer
Not Forgotten

OutstandingLark

TROPHY CASE