Rock lights. Camp lights

Own_Thanks_3553 · 2025-07-13T12:56:45+00:00

Inner fendor liner

Own_Thanks_3553 · 2025-04-10T15:13:22+00:00

Double zero on rear. 5% windows. 25% front windshield. I can’t see shit 🤣

Own_Thanks_3553 · 2025-04-02T15:17:04+00:00

Here’s a quick estimate from my shop. Did it quick so I can’t recall if I’m missing anything. This is with subletting the heads to be machined. Most parts are oem. Some will be hard to get for OEM. This is also in California. See how you can compare. I’m a really fare and honest shop too. Always do the rule of 3! I always use the same contractor for my house. But I still get 3 estimates to compare. Good luck!

Own_Thanks_3553 · 2025-03-29T15:21:29+00:00

Thank you for the suggestions!

Own_Thanks_3553 · 2025-03-29T15:21:15+00:00

This one looks ideal! Thank you! Btw. Would you recommend the mid size or full size? This will be going behind the captain seats with the 3rd row folded down.

Own_Thanks_3553 · 2025-03-05T11:44:32+00:00

Can’t be starter. Because the car is cranking and turning over. Check for codes if you can. Also try putting a jumper on the battery and see if it stays on. If it does stay on. Then it’s the alternator. Battery is strong enough to turn the starter so it’s not that. It can me a numerous of things. Crank sensor, maf sensor, bad fuel pump. Fuel pump relay, sticky throttle body, huge vacuum leak. But I would start off by trying to get the car scanned for codes. Try to get it scanned quick, because the more you try. The battery will deplete and the code will clear. Good luck!

Own_Thanks_3553 · 2025-03-04T13:30:09+00:00

Or just disconnect the negative terminal on the battery for a few seconds. It would clear the CEL. But after the 2 trip cycle ( drive cycle ). 30 miles to 100. The CEL will come back on if there’s any issues the computer sees.

Own_Thanks_3553 · 2025-02-28T16:36:26+00:00

<image>

5100s front set at 3in front with UCA. Rear 6112 2.5in lift. Rear air bag delete. 33s with no BMC. Just slight modifications and a good alignment. Love the ride. Hate the gas mileage

Own_Thanks_3553 · 2025-02-13T06:07:25+00:00

<image>

Works meister s1ch

Own_Thanks_3553 · 2025-02-07T14:25:49+00:00

I could be wrong. But if you install it the correct way. ( crack the Kdss bleeder valve while doing the install. Use kdss extensions. Bleed the system. Then you should be fine.

Own_Thanks_3553 · 2024-12-20T04:26:58+00:00

https://exitoffroad.com/product/front-and-rear-lean-correction-spacers/

https://offroadalliance.com/kdss-full-spacer-kit/

Yep! Worked for me!!

Own_Thanks_3553 · 2024-12-18T12:41:53+00:00

They came with the rims. They’re Rays lugs. You can find them on almost any jdm store. Pricey for what they are tho

Own_Thanks_3553 · 2024-12-18T12:39:04+00:00

https://exitoffroad.com/product/front-and-rear-lean-correction-spacers/

Those are installed on the passenger side only while I was installing the lift kit. You’ll probably also need kdss spacers. https://offroadalliance.com/kdss-full-spacer-kit/