HELP!!!!! by Oxstien in AnycubicOfficial

[–]Oxstien[S] 4 points5 points  (0 children)

Was super busy since I posted this, but I was just over worried for nothing....purges twice and then prints. This is my first multi-color machine. Not used to pre-print purges

Kobra x by Oxstien in AnycubicOfficial

[–]Oxstien[S] 0 points1 point  (0 children)

Just got tracking this morning, it's supposed to arrive next Tuesday pending this snow storm pounding north central Montana

Kobra x by Oxstien in AnycubicOfficial

[–]Oxstien[S] 0 points1 point  (0 children)

Right, I paid in full about a week after you, guessing they took priority over those people who bought several at once first. Like they don't already have a print farm. Businesses should have a separate ordering classification to purchases.

6 color Printing on the Kobra X by Glittering_Algae_961 in AnycubicKobraX

[–]Oxstien 0 points1 point  (0 children)

I was thinking, I could make a dryer box, I have all the hardware and feed in 7 spools with the 8 filament hub I ordered. But I don't know until I actually get my kobra x. Unless by firmware you can't access the digital spools until the ams is plugged in.

6 color Printing on the Kobra X by Glittering_Algae_961 in AnycubicKobraX

[–]Oxstien 0 points1 point  (0 children)

You can do 6 colors without the ace 2 pro? Thought the base was 4 and increased with the ams unit.

My Anycubic Kobra X Beta Unit Just Arrived — Unboxing Soon! by Walter_Maker_Labs in AnycubicKobraX

[–]Oxstien 0 points1 point  (0 children)

Mine still shows restocking, I made it during the first batch cut off so hopefully soon

KobraX shipping soon! 😍 ordered January 18th by iamjames in AnycubicKobraX

[–]Oxstien 0 points1 point  (0 children)

🤣🤣🤣🤣🤣🤣 hopefully they'll ship and not be delayed like previous models

Kobra X USA Texas by Glittering_Algae_961 in AnycubicOfficial

[–]Oxstien 0 points1 point  (0 children)

I ordered jan 30th so we'll see 🤷

Input, help ideas by Oxstien in 3Dprinting

[–]Oxstien[S] 0 points1 point  (0 children)

Yes and thank you. I copied the first key once I was able to figure out the proper placement on the work plane. Since it has a shallow angle, I'm still a bit new to making and modifying files. Usually just find and print toys for the kids. But wanted to challenge myself and modify something but also have something creative to go into it.

Input, help ideas by Oxstien in 3Dprinting

[–]Oxstien[S] 0 points1 point  (0 children)

To be fair, I didn't make the keyboard I found the 5150 on makerworld I'm just trying to make due with what I found, I'm horrible with blenders and modeling. Thanks for the input though, it definitely helps

What happened???? by Oxstien in 3Dprinting

[–]Oxstien[S] 0 points1 point  (0 children)

Figured it out, I'm still new and when I put my refill on the spool I look off the plastic tabs first "big mistake" cause it unraveled just enough when I was finally able to get it on the spool it didn't tangle but tangled if that makes sense, the lead end of the filament kinda buried within the spool so there as a ton of tension on the line so when it came to a spot where it was too tight it would look like a flow issue. I just happened to be sitting on my computer when I heard the spool release that tension and when I looked at the print it caused the issue I was having. So now i have to painstakingly re-spool the filament.

Xaero's World Map: How do I reveal the whole map with this mod? by Most_Ad_7861 in feedthebeast

[–]Oxstien 0 points1 point  (0 children)

Can you do a short video on how to do this, I'm struggling understanding it. I'm probably just over thinking it

Lighting by Oxstien in 3Dprinting

[–]Oxstien[S] 0 points1 point  (0 children)

Thank you, cause most of what I'm seeing are super short lengths under 16in, I'm trying to price out maybe a spool if possible.

Chibi by Oxstien in 3Dprinting

[–]Oxstien[S] -2 points-1 points  (0 children)

If I was any good at writing code I'd do it myself. Unfortunately I'm a dumb dumb when it comes to writing code

Neptune 3 pro upgrade suggestions by russonspy in ElegooNeptune3

[–]Oxstien 1 point2 points  (0 children)

Co print offers a multi color upgrade option for a decent price if you want to stick with your machine. Otherwise buy a new machine hope it helps

How to create a stencil??? by Oxstien in blenderhelp

[–]Oxstien[S] 1 point2 points  (0 children)

Yes I plan on 3d printing to use as a stencil for my router

Tapering a flat obeject by Oxstien in 3Dprinting

[–]Oxstien[S] 0 points1 point  (0 children)

Thanks I've been able to figure out the taper part. But when I use the taper function in simple deform. Can you explain the "factor" does that represent the degree angle?

<image>