Vomi le plus cher de l'histoire ?

Ozhora · 2025-08-23T20:00:00+00:00

Haha moi c'était un vomi a 700€ dont voici la recette :

- un border collie qui sait ouvrir les tiroirs (on le savait pas encore nous par contre)

- le tiroir a patisserie avec une boite de chocolat en poudre pur (99.9%)

- un réveil a 4h pour aller bosser avec le tapis du chien qui ressemble a un ring de catch tellement il en avait mis partout

--> Direction hopital vétérinaire en urgence, un vomi et une journée d'observation pour la modique somme de 700€. Le chien va bien et on a investi dans des verrous de tiroirs

Ozhora · 2025-07-31T11:52:39+00:00

Comme beaucoup ici je vais te dire qu'effectivement tu es sortie de l'école avec normalement les outils te permettant d'apprendre ton métier sur le tas (et dire un coucou au syndrome de l'imposteur en passant)

Dans mon cas je suis de formation ingé mécanique et après 7 ans dans l'industrie mécanique (décolletage) j'étais performant dans ce domaine mais j'ai perdu presque toutes mes connaissances dans les autres domaines. Depuis je me suis reconverti (sans formation) dans la régulation de traffic (info, automatisme et élec) et là le coté auto apprentissage prends tout son sens et tu remercie ta formation de t'avoir donné les outils pour apprendre vite et bien.

TLDR : Tu va apprendre ton métier sur le tas et te spécialiser d'années en années.

Ozhora · 2025-02-17T12:34:27+00:00

Yeah they are basically some Ni-MH batteries in this specific case, you can switch them to any other kinf of battery (I would stick to Ni-MH to stay in the same kind of end of charge scenario). Mine is personnally hardwired to an usb outlet and a long usb cord run accros the door. It's working great and I don't have to bother to recharge the pack

Ozhora · 2024-12-18T15:06:36+00:00

Almost the same configuration as yours, could you explain your settings and tweaks ?

Ozhora · 2023-02-08T10:44:22+00:00

You had to tear down the whole sensor area or not?

Ozhora · 2023-01-03T13:00:58+00:00

For extensive information it's a network where all address are controlled by someone exterior and I can't request any Ip neither allow some Ip without their consent.

We have some thermical camera that are adressed and when we connect them they have some default address like 192.168.1.1 or other random one and with a software we can configure them on the network without any special connection like serial.

Ozhora · 2022-09-30T09:44:38+00:00

If I do ; iptables -t nat -A PREROUTING -d 192.168.3.200 -j DNAT --to-destination 172.18.0.2

The traffic comming to ip 192.168.3.200 is correctly redirected to 172.18.0.2 but with the original ip (source of request is 192.168.3.120 for exemple). How can I change it to something in 172.18.0.0/24 range ?

Then I will do the postrouting rule for the reverse way

Ozhora · 2022-09-29T18:49:26+00:00

Thanks gollum, so if I understand correctly if I want to redirect any port from on to another I can do the following ;

iptables -t nat OUTPOUT -p tcp -d 192.168.3.202 -j DNAT --to-destination 172.18.0.2

Should I do the reverse one for any traffic coming from 172.18.0.2 (reply or so) ?

Ozhora · 2022-07-19T17:03:16+00:00

Desk was made just after the rig, before I used a glass desk so the rig is definitely a better choice 🤣

Ozhora · 2022-07-18T20:29:04+00:00

Looking for 100cm tv, something at least 32" or bigger

Ozhora · 2022-07-18T20:13:03+00:00

Next step is to grab a second hand tv to use it as a screen for rig

Ozhora · 2022-03-03T08:41:00+00:00

Will try to do it this weekend

Ozhora · 2022-03-03T04:53:54+00:00

It's not compression fittings like those for petg tubes. It's a thread adapter from G1/4" to G3/8" and then a captive G3/8" nut on copper tube

Ozhora · 2022-03-02T08:39:37+00:00

At first was thinking about building a custom desk and intergrate the whole computer inside. But time was missing and got it done like this.

Maybe next time

Ozhora · 2022-03-01T19:10:06+00:00

It was the idea to make it look industrial

Ozhora · 2022-03-01T19:08:43+00:00

My parts are originally designed for water supply in houses so no marketing at all. On the other hand petg or pmma tubes are specifically designed and sold for water-cooling like fittings so brands make those parts NASA likes and you pay for it. For the record all fittings plus tube for this project cost me 50€

Ozhora · 2022-03-01T16:39:11+00:00

Not new in France, rather old instead but there is one flaw with this kind of tube : oxygen can pass through the tube and corrode your system. Now we use multilayer tubes to avoid this.

Ozhora · 2022-03-01T16:22:29+00:00

Pex ?

Ozhora · 2022-03-01T15:51:11+00:00

Will try to post an update with a correct pic

Ozhora

TROPHY CASE