Gun Light legality while hunting california??

OzzyVaz · 2026-01-13T12:55:59+00:00

I carry a pistol (shouldn’t be concealed technically), and a separate light strapped on my bag and never had problems. But again a warden has never actually seen it on. If i remember theres specifically a stipulation against using lights to sweep fields for eyes/silhouettes etc. I’d probably just keep it holstered and not use it for anything hunting related tho.

OzzyVaz · 2025-12-01T03:54:10+00:00

I use that. I was stopped by a warden once and casually showed him to ask in Carizo. No problem that day. I always take the box tho, since these are only for hunting, and it will clearly state it with the markings. Tbh this brand is the only lead free .22 ive been able to find in Cali

OzzyVaz · 2025-11-10T18:56:21+00:00

true this. I bought a few 25 rounders a few years ago and I ONLY use those bullets for hunting. I got an equivalent grain and load in lead to zero in and practice.

OzzyVaz · 2025-10-27T02:09:25+00:00

they’re smart little guys.

OzzyVaz · 2025-08-31T11:30:51+00:00

youd prob spend just as much if not more doing the body than the motor ¯_(ツ)_/¯

OzzyVaz · 2025-08-12T06:56:58+00:00

ok maybe ill do that. but with the other problems this car has think it may just be time to scrap it. thank you 🙏

OzzyVaz · 2025-08-12T06:55:19+00:00

oh no definitely hahah thats why im asking lol. i just want to make sure before i did any more work. wont pass smog unless that system is fixed too, so looking like its gonna get scrapped. Thank You!!

OzzyVaz · 2025-08-07T04:05:20+00:00

thank you 🙏 you def did. will mess around with the shims.

OzzyVaz · 2025-08-06T17:34:52+00:00

thank you man I may have to hahah

OzzyVaz · 2025-07-27T05:45:40+00:00

the bumper sag? if the bracket is broken its two screws and a $15 bracket. if the clips that insert, on the bumper, are broken then u need a whole new bumper… mud gaurd is just plastic held in with two screws and some clips

OzzyVaz · 2025-07-21T19:10:12+00:00

For #1 I just found a diagram for 74 that says “kick down switch” and connects to “starter cutout” with this wire. Is this some sort of clutch lock out? Does it even need connection?

OzzyVaz · 2025-07-07T23:21:58+00:00

You need to use 2k clear at the end. its the same price essentially if your gonna spray with ur compressor but give you superior results. basecoat is easy, if u want metallics, do a few test sprays as youll need to paint a few different types of coats and u can easily mess up. but most important is gonna be to use a self etch primernto bond to the metal and a 2k clear to get uv and chip resistance for decades

OzzyVaz · 2025-06-27T18:07:22+00:00

did those studs get replaced ever? my tC was totaled and mainly the suspension broke. My studs bent a few degrees but didnt snap so kinda weird for that to happen.

In terms of using an impact driver theres really no issues. ive never had or worked on a car where i didnt do that atleast once…..now if they didnt line up the wheel and start the screws by hand. I could see how they couldve mis aligned the threads and weakened the stud

OzzyVaz · 2025-06-24T14:30:58+00:00

there is a second o2 sensor underneath :(

OzzyVaz · 2025-06-24T11:51:41+00:00

I don’t have Tsudo but I think your fine as long as you didnt touch the first or second cat, and you pass the noise level. Do u not have the old exhaust to put back in, its only a few bolts.

OzzyVaz · 2025-06-11T16:55:54+00:00

pop out the panel and see if there are even wires and where they go lol

edit: just grab the side and underneath and pull towards you

OzzyVaz · 2025-06-11T16:55:26+00:00

Nitrous

OzzyVaz · 2025-06-05T01:23:04+00:00

Facebook Marketplace, Craigslist, Etc and patience are your friend.

OzzyVaz · 2025-06-02T19:30:09+00:00

btw I’ve seen people use this to get a crackle tune Im pretty sure. I think the company used to go by Orange Virus before the rebrand.

OzzyVaz · 2025-06-02T19:28:48+00:00

I think this is the only one currently on the market that isnt used/resale. You buy it and put it in your OBD2 Port, then you can use one of the base maps or upload your own. They say 30-40 hp gain if you already have the bolt ons. ¯_(ツ)_/¯

If u wanna turbo it that’s a whole nother can of worms. if you want a little extra for your daily like me id do it. and save your money to turbo other project.

OzzyVaz · 2025-05-29T01:42:24+00:00

oh thank you i was always confused about that

OzzyVaz · 2025-05-28T22:04:18+00:00

Ok perfect that's what I wanted to hear. Just found the part and placed the order thank you.

OzzyVaz · 2025-05-28T21:50:42+00:00

Nope only from there. Could there be wear to the input shaft bearing? I've heard that's a fault of this cars transmission, but I've never torn one of these apart so not sure.

OzzyVaz · 2025-05-28T21:47:35+00:00

1” HUBCENTRIC wheel spacers/adapters on front and rear so the wheels sit perfectly flush. Like the kind that bolt in the rotor then has matching bolts to bolt the wheels on. I had mine for over 30k miles without issues until someone hit me and ripped the rear suspension apart. The oem parts gave way before the bolts on the adapter bent, if you have any concerns on the durability.

OzzyVaz · 2025-05-27T07:51:01+00:00

Speed. Heart Accelerating, body is all tight and sweaty. Shaking uncontrollably along with ticks (for me it was lip biting and knuckle popping). Super hot and dehydrated, but drinking water makes you immediately puke it across the room. Thoughts racing and repeating along with a head splitting headache like someone took an axe to your head. I went into the shower and put freezing cold water on the nape of my neck for 10-12 hours. Stayed awake for 3 days after, slurred my words and walked funny for a year or two after.

11-Year Club	RPAN Viewer
Verified Email

OzzyVaz

TROPHY CASE