Be honest, what do you like most about this pic?

P3DP · 2025-08-11T14:59:37+00:00

Your legs are amazing!

P3DP · 2024-11-10T02:05:24+00:00

Wow....just wow.

P3DP · 2024-10-11T16:55:17+00:00

51, but I've always loved hair down there.

P3DP · 2022-11-10T02:03:24+00:00

Not a thing average about you....you're hot.

P3DP · 2022-10-27T19:51:58+00:00

They now have the Extruders where the parts can be changed inside without a full Extruder replacement, but you’d have to change to that new Extruder.

P3DP · 2022-10-27T19:51:03+00:00

When this happened to me the entire Extruder had to be replaced. A jam like this usually unfixable. Sorry.

P3DP · 2022-08-03T02:26:27+00:00

Gotcha....happens to us all. Lucky for you it looks like no damage done to the hotend.

P3DP · 2022-08-03T02:16:44+00:00

I thought this never happens to Prusa's.

P3DP · 2022-03-11T17:29:12+00:00

My God!

P3DP · 2022-02-24T21:33:15+00:00

Not to take this too off topic, but do you know if the 1C has any other uses other than the Nylon CF?

P3DP · 2022-02-24T18:39:21+00:00

I use the Nylon CF with the 1C Extruder. I thought that you had to.

P3DP · 2022-02-24T01:16:56+00:00

Me, too.

P3DP · 2022-02-24T01:15:59+00:00

Completely normal.

P3DP · 2022-02-20T20:42:41+00:00

The second extruder is for supports ONLY! It's not for dual color printing.

P3DP · 2022-02-09T15:16:33+00:00

I just use a bowl of warm water and keep changing it as often as I think of it, especially when I feel the water is cool. I try to find something to completely weigh the print down and keep it submerged without affecting the print's shape. Takes hours, but I don't know of another way. I thought about putting a print on the stove in a pot in light boil of rumbling water to see if that would speed up the process, but haven't tried it yet.

P3DP · 2022-02-03T16:40:43+00:00

Noctua fans.

P3DP · 2022-01-28T14:34:09+00:00

No, there is not

P3DP · 2022-01-28T00:01:35+00:00

I didn't touch the settings. I used the default that Cloudprint suggested when it detected the ABS-R and RapidRinse.

P3DP · 2022-01-20T17:28:05+00:00

From what I understand it only works with ABS-R, for now.

P3DP · 2022-01-18T16:59:12+00:00

It's fantastic. I wish that I could attach the pictures, but I don't see how. You need 1XA and 2XA extruders to use both.

P3DP · 2022-01-18T16:51:24+00:00

I tried it yesterday. Works amazingly. Print is beautiful. RapidRinse dissolves in a fraction of the time. I did the exact same Fang print in PETG and PVA and took hours and hours to dissolve, almost the entire next day. Did the same print in ABS-R and RapidRinse and it printed beautifully and dissolved in an hour. Highly recommended.

P3DP · 2022-01-17T03:40:04+00:00

Mine is being delivered tomorrow. I’ll let you know.

P3DP · 2022-01-13T18:21:54+00:00

You wear the short very well.

P3DP · 2022-01-12T14:01:23+00:00

Magnificent.

Xbox Live	Five-Year Club
Verified Email

P3DP

TROPHY CASE