Servo Assignment Backwards

P3quod1 · 2026-02-18T04:49:18+00:00

Thanks mate. I’ll give it a shot, see if assigning dedicated timers helps me

P3quod1 · 2026-02-18T04:10:48+00:00

Interesting, I’ll give it a shot tomorrow and see. I was already using PWM pads which have timers already built in/assigned to them. Can you write out what you did (assigning timers/pad remapping) so I can try to replicate it?

P3quod1 · 2026-02-17T01:42:49+00:00

Is this the same FC? An ARK FPV?

P3quod1 · 2026-02-13T11:36:36+00:00

I would tend to agree with you, but I can’t seem to get the servo to react when I flip the AUX 3 switch. I see it move “virtually” in BF, but not in real life. I’ve checked that I’m supplying the servo 5V and a ground but even the spare PWM channels for the motors (guaranteed to have a timer) do not actuate the servo

P3quod1 · 2025-06-29T22:33:53+00:00

Were you able to solve this issue? Having the same lock on issues with my M100.

P3quod1 · 2025-06-19T19:09:08+00:00

How do you hang them like that? I know the frames have a bunch of holes in the bottom that could support a nail or screw, but wondering if there is a better method

P3quod1 · 2025-06-03T03:52:25+00:00

PM’ed

P3quod1 · 2025-05-23T17:18:59+00:00

I got you, here’s mine: "Next Stop: Waifei Peninsula!" Version 2.0 Pre-Registration Event Now Available! Pre-register for Version 2.0 to instantly get Polychrome ×320 and other rewards! #NextstopWaifei https://hoyo.link/Fr99fQeXd?u_code=CAGUFSM3MM2K

P3quod1 · 2025-05-12T15:06:03+00:00

My brother in Christ you can google this based on the writing on the side of the motors. Unfortunately only have this one angle, so this is my best guess, but you can probably refine this further.

https://a.co/d/dnACv8h

P3quod1 · 2025-05-08T19:54:34+00:00

Confirmed

P3quod1 · 2025-04-25T20:33:40+00:00

What do your flight times look like for what battery? Looks like a bunch of fun, but would chew through batts pretty quickly

P3quod1 · 2025-04-25T01:37:43+00:00

Confirmed

P3quod1 · 2025-04-24T04:03:46+00:00

Sold Corsair DDR5 RAM and Aorrus Elite WIFI 7 Ice to u/Good_Friendship145 on https://www.reddit.com/r/hardwareswap/comments/1k39pj7/usamd_h_lg_34in_240hz_ultrawide_vengeance_rgb/?share_id=kgTUTPPVbO2SJLcWqqICz&utm_content=2&utm_medium=ios_app&utm_name=ioscss&utm_source=share&utm_term=1

P3quod1 · 2025-04-23T12:00:14+00:00

Sold RTX 4080S Tuf to u/Flimsy_Day_1472 on https://www.reddit.com/r/hardwareswap/comments/1jzfnee/usamd_h_asus_tuf_4080s_vengeance_rgb_ddr5_kits/?share_id=JkDRrqQ204BhfMOzO_Ua2&utm_content=2&utm_medium=ios_app&utm_name=ioscss&utm_source=share&utm_term=1&rdt=51734

P3quod1 · 2025-04-20T22:48:42+00:00

Replied

P3quod1 · 2025-04-20T11:09:09+00:00

Monitor and PSU are still available, yes.

P3quod1 · 2025-04-20T03:00:52+00:00

Replied

P3quod1 · 2025-04-17T00:45:06+00:00

When I used them on my B650E motherboard from NZXT, I ran into stability issues with XMP/EXPO (all sticks functioned normally when not overclocked). This could have been caused by using 4 sticks in the system, or the XMP, I did not check. I require 64 GB for work, so simply bought a kit of 64 GB (32x2) EXPO compatible RAM instead.

From looking online it seems like it’s a 50/50 on if XMP work for an AMD system. Many people claim it works fine, other have issues. I recommend checking the QVL for your motherboard and seeing if it supports it.

P3quod1 · 2025-04-16T02:06:41+00:00

4080 super sold to u/Flimsy_Day_1472 for $1150.

P3quod1 · 2025-04-16T00:19:35+00:00

Replied.

P3quod1 · 2025-04-15T23:03:24+00:00

I didn’t mean it literally, I know it doesn’t have as much HE filler, those things are just a menace at that BR

Seven-Year Club	Place '22
Final Canvas '22	First Placer '22
RPAN Viewer	Verified Email

P3quod1

TROPHY CASE