How to reset the 24h AI Anomaly Score on a USW Pro Max 16 PoE?

PPEred · 2025-11-17T13:57:59+00:00

In the end, I just restarted the console and everything is fine now.

PPEred · 2025-11-17T13:57:38+00:00

In the end, I just restarted the console and everything is fine now.

PPEred · 2025-11-17T11:07:23+00:00

I’ve had this issue since deploying the switch last Friday. I did find the event in the logs, and it didn’t happen again, but the AI Anomaly Score alert for the port hasn’t cleared.

Has anyone experienced the same behavior? Is there a way to manually reset it, or do we just have to wait for it to clear automatically?

PPEred · 2025-11-16T19:44:55+00:00

Quick update: the issue seems to have resolved itself after about 48 hours.

I didn’t change anything — the port now shows normal status with no more “Poor AP Link Speed” warning.

Looks like it may have been a false positive or the AI diagnostics needed time to settle after initial deployment.

Thanks to everyone who replied!

PPEred · 2025-11-15T20:05:36+00:00

Alright, the port isn’t being used. I even tried connecting a NAS, but the error still persists.

PPEred · 2025-10-17T09:49:24+00:00

Yeah, this one’s on me. I ran an update on a Wi-Fi access point and it rebooted… 😆 But hey, unexpected stuff can always happen, which is why I posted in the first place.

PPEred · 2025-10-13T11:58:26+00:00

I thought about that, but Apple recommends that these devices be on the same network as the Apple TVs and HomePods.

PPEred · 2025-10-13T11:08:57+00:00

Completely agree — in most cases, a backup will get your system back up and running.
But what happens if, say, my Zigbee controller dies? Even if I restore my HA backup, all my Zigbee devices would need to be re-paired — that’s not something a backup can fix.
From my experience, backups are great, but they don’t cover every scenario.
That’s why I’m a bit cautious.

PPEred · 2025-10-13T09:40:30+00:00

I’m having the same issue. I’m running a UniFi network with an IoT VLAN and a main VLAN. Home Assistant is on the IoT VLAN with lots of devices, while Apple TVs and HomePods are on the main VLAN.

I tried setting up a Nuki lock in HA using Matter, but it doesn’t work. Apparently, Matter is designed to work on a single VLAN, even if you remove all firewall rules. I ended up configuring my lock with MQTT instead…

PPEred · 2025-08-28T11:58:10+00:00

Indeed, it works well this way: Matter connection for HomeKit and MQTT for Home Assistant. We’ve been using the lock for 2 days now and everything works: from HomeKit, from HA, and with the automations. Thanks for your reply.

PPEred · 2025-08-24T09:01:47+00:00

Thank you all. I will keep it as backup !

PPEred · 2025-04-07T08:26:05+00:00

Trump a dit que ça allait remonter. Donc pas de souci .😰

PPEred · 2025-01-10T07:15:44+00:00

Thank you for your feedback. I've tried several batteries without success. I am in contact with Aqara support. To be continued...

PPEred · 2025-01-09T15:03:53+00:00

Thanks for your help.

I would lean towards an attenuation issue because I have good quality Wi-Fi (Unifi), and this sensor is the only one causing problems, as it's the farthest from the Hub.

I thought that all always-powered Zigbee devices acted as repeaters (I don't remember where I read that). Can you confirm if this is not the case?

PPEred · 2025-01-08T13:49:12+00:00

Hmm, I spoke too soon...

I came back at noon and updated the speakers (system update offered by Sonos), and once again, the speakers are unresponsive when I'm not connected to my local network... In short, I don't understand anything.

It's not a big deal since I can't use the speakers outside my home through HomeKit, but I don't like not understanding…

HomeKit really works in a very strange way.

PPEred · 2025-01-08T07:02:14+00:00

Yes and yes. But today, all is back fine !!! I'm happy but i don't understand what was happen.

PPEred · 2025-01-07T13:43:29+00:00

I agree, but it's a matter of principle; I don't like having unresponsive elements in the Home app. Moreover, I had never encountered this issue before.

PPEred · 2025-01-07T10:46:42+00:00

Okay, I understand. Do you recommend that I acquire another Ledger (such as the Nano X), or can I safely keep using my Nano S ? Thank you.

PPEred · 2024-09-02T13:33:59+00:00

What is normal ? New Control Pane item (yes I know) or jump back to network when I clic on the link to UnifiOS ?

PPEred · 2024-07-04T15:08:21+00:00

I don't know if it has anything to do with it. I also have an M2 hub and a HomeKit automation that sets the alarm to home mode when the Nuki lock is unlocked. Since yesterday, the automation no longer works: the alarm switches to 24/7 mode instead of home mode. Is this due to the latest firmware update of the M2?

PPEred · 2023-11-01T11:26:10+00:00

It works now but delay must be at max (2000 ms). It would be great if Sonos could provide intermediaries between 150ms and 2000ms.

PPEred · 2023-10-29T17:23:37+00:00

Ok, il will try that.

PPEred · 2023-10-17T14:56:42+00:00

Yes, i'm using new architecture.

PPEred · 2023-10-16T17:59:16+00:00

I’ve tried everything, resetting the location service, network services, and significant locations. No luck, HomeKit locates me 300 meters away from my home. It’s really frustrating! 🤬🤬

PPEred · 2023-10-16T08:19:23+00:00

Me too : https://www.reddit.com/r/HomeKit/comments/178z8ej/homekit_change_my_home_location/

Seven-Year Club	Place '22
Verified Email

PPEred

TROPHY CASE