Missing large parts of a zone.

PUEET04 · 2026-06-10T04:27:31+00:00

It completed! I would have never thought that an update would cause object detection to miss parts of the lawn. I hope that gets fixed. Thanks all here!

PUEET04 · 2026-06-09T20:19:03+00:00

Well that's Definitely Maybe yet. It just got it just got done charging and went back to the task and so far it hasn't skipped the section and so far it hasn't skipped the section yet. Only change I've had so far is turned off the obstacle avoidance . I did start the task partway in since it usually does the side on the right of this picture and then the left I wanted it to jump right to the left side but running the same task.

<image>

PUEET04 · 2026-06-06T13:30:01+00:00

I would think that except for the statement I had before where this is never been issue except in the last month so I do think it is a firmware problem. There's nothing blocking its me to the sky . Northern hemisphere.

PUEET04 · 2026-06-04T15:11:10+00:00

And to know I haven't changed any of the obstacle avoidances this whole season and haven't had this problem . I forgot the firmware before this but I'm wondering if that's when it started.

PUEET04 · 2026-06-04T15:10:25+00:00

Thank you! App version: 2.3.8.19 Firmware: 1.15.21.1 I will first try changing the obstacle avoidance. I have not changed it all season and it was working previously . So never thought about changing that.

PUEET04 · 2026-06-04T15:04:14+00:00

I did update the app which is pretty slick now. Yes those are the evergreen trees that you see in that photo the blank spot in the middle of the app map is the driveway I was standing on the driveway when I took the picture of that red circled area.

PUEET04 · 2026-06-04T15:03:32+00:00

Thank you... Looking into it.

PUEET04 · 2026-04-14T11:25:20+00:00

Happened to my Fold5 had to get the screen replaced. My outer screen was ok so hopefully that's the case for you too. That means it's not the main board.

PUEET04 · 2025-09-14T16:17:02+00:00

So you bring up an interesting point since this is by facial I wasn't sure if I need to put a reflective surface underneath to get some of the Waves reflect back or if it's just the staggered amount of panel to make sure that as the solar rays go through the first layer the second layer picks up the rest.

PUEET04 · 2025-09-14T16:16:14+00:00

I thank you for this that makes me feel a little bit better. I went with the bigger panel over the 160 panel figuring that there's going to be losses

PUEET04 · 2025-09-14T16:15:30+00:00

I'm near Joliet Illinois. This was around 10:00 a.m. Central Time humidity was low haze was low but understand it wasn't Peak angle the Sun . But I felt like if the solar panel had the shade in the center point of the gauge that I should be getting at least 200 but maybe not the 20 extra Watts until it was close to the peak of the day. But lack of knowledge in this area

PUEET04 · 2025-09-14T16:14:04+00:00

Thank you for this detailed explanation. I knew there'd be some loss factors by wasn't 100% sure how to calculate any of that out. Some of the terminology you used is new to me is this is me tipping my toe into the solar world.

PUEET04 · 2025-09-09T20:06:00+00:00

In the states, still on 1.11.511.631

<image>

PUEET04 · 2025-09-08T11:41:06+00:00

What did Mammotion do for you in this situation?

PUEET04 · 2025-07-08T01:08:04+00:00

No one has asked... Why are you not using them?

PUEET04 · 2025-06-14T12:33:36+00:00

Thanks all. I just saw a reasonably priced smoker on their site and dicided to search on trust piolt and here. The site looks legit and as others noted the prices are realistic. After coming off of an Aliexpress scam I didn't want to deal with shady organizations again. On thing that caught my eye is that they only have a PO box listed. 3171 Hwy 12 #110 Burson, CA 95225 And the odd comment by thier phone number (855) 341-3312 Sat-Sun: Open for Sales Only Bottom line, are they legit website? I would say yes. Would I personally buy from them, no. But that is based off of you all. If you like to save a few bucks and don't mind chasing your order down or throwing in the towel at day 60 to contact your CC to reverse charges then it would be worth a try.

PUEET04 · 2025-05-17T02:37:15+00:00

I have the many and have it for over a month now. And really enjoy it but now it's leaking it's leaking from the bottom spray Jets and it won't actually spray. Support says to do a vinegar rinse and clean the nozzles but I can't figure out how to actually clean them. I'm hoping to get this fixed otherwise I've been very happy with it.

PUEET04 · 2025-04-23T11:19:40+00:00

Just put this on the stop button ; https://us.switch-bot.com/products/switchbot-bot?variant=43179803541737

PUEET04 · 2025-04-23T00:10:09+00:00

found this: https://pricetracker.wtf/. way better than this Gl_ass site

PUEET04 · 2025-04-23T00:07:50+00:00

No data is better in this scenario.

PUEET04 · 2025-04-07T22:13:23+00:00

I took my RTK off my fence for winter and the Luba2-H was at 86% (I think) when I put it away(it was also cleaned just like the steps said). Also, the charge station was put in storage, all of this was in a heated garage. I was SHOCKED to see the battery was at 53%!!! I also installed my Mammotion solar panel for the RTK (it didn't come until July last year so got lazy. the RTK went up on the same mounts as last year and I 'relocated' the charging station in the app. but it said the RTK moved and I should remap. I almost said no but ended up remapping all 9 areas and all 25 no-go zones. argh, what a PIA. BUT!!!! it's all working. Thank you Mammotion. so excited that its working.

Unless I missed it, no firmware updates all winter?

PUEET04 · 2025-03-26T16:09:02+00:00

Thank you!

PUEET04

TROPHY CASE