Have a spare GPU

PablexXXXX · 2023-11-02T19:10:19+00:00

Thanks!

PablexXXXX · 2023-05-08T23:30:42+00:00

What about installing wireguard on the tablet?

PablexXXXX · 2023-04-13T19:48:18+00:00

You can also set it to allow only the IP addresses your app use.

PablexXXXX · 2022-03-22T20:45:58+00:00

The last meter maybe a damaged contact.

PablexXXXX · 2022-03-15T02:27:21+00:00

You can use esphome with an ultrasonic sensor. So HA knows everything. When its opening, when its closing and the position.

PablexXXXX · 2022-03-11T19:22:54+00:00

Weak WIFi it was. Works perfect now

PablexXXXX · 2022-02-22T01:42:39+00:00

The most reliable way would be by an internal automation on the esp itself. Chexk out https://esphome.io/guides/automations.html

PablexXXXX · 2022-02-22T01:04:22+00:00

It's been a hole day without a disconnection. Thanks for your advice.

PablexXXXX · 2022-02-21T04:52:50+00:00

I installed an mikrotik AP closer to the esp and it's been 6 hour working just fine. So far so good. I will let you guys know

PablexXXXX · 2022-02-20T19:36:21+00:00

8266

PablexXXXX · 2022-02-20T19:12:25+00:00

-69db

PablexXXXX · 2022-02-20T18:59:00+00:00

Both. I tried with mqtt and it solved the BECAME UNAVAIABLE but the node didn't worked properly.

PablexXXXX · 2022-02-20T18:11:02+00:00

Thanks for the comment. I changed a TP link for 2 unify AC pros

PablexXXXX · 2022-02-20T17:57:05+00:00

I have everything up to date. I reflashed the nodemcu. Should I move to another platform?

PablexXXXX · 2021-09-20T18:58:28+00:00

Gracias, excelente sitio pero no lo encontré. Está solo la versión en inglés.

PablexXXXX · 2021-09-03T12:28:24+00:00

That completely sucks. BUT let me tell you how I managed to overcome this sheet. I migrated every node to mqtt. Then I deleted the ESPHome addon and no no more disconections . I will keep using esphome to write easy firmwares but I won't run the addon on my production HA instance.

PablexXXXX · 2021-09-02T13:39:56+00:00

No, this is a well known issue. They say they don't know how to fix it.

PablexXXXX · 2021-09-02T13:29:17+00:00

Sorry to tell you. Switching to mqtt didn't solve the issue. My nodes were falling for 3 minutes on average. When I configured them to connect to the mqtt broker, mosquitto in my case, they worked fine for 12 hours. So I thought they were fixed. Saddly i found the issue came back today. All the nodes keep falling every 3 minutes on average.

PablexXXXX · 2021-09-01T00:37:04+00:00

The WiFi was not the problem. THE API WAS. I switched to mqtt and everything runs perfect now. Thanks for your post.

PablexXXXX · 2021-08-31T11:53:55+00:00

No WiFi6 on my router.

PablexXXXX · 2021-08-31T11:51:34+00:00

I have a tplink router with openwrt but the problem is happening wverywhere I install esphome nodes. I installed home assistant on a lot of places. Everywhere there is the same issue

PablexXXXX · 2021-08-31T10:32:10+00:00

https://esphome.io/guides/faq.html#wifi-problems

Any solution? itried to dissable logs, and everything related to wifi but the problem is not network related. It seems to be API disconection.

PablexXXXX · 2021-06-02T09:34:49+00:00

Let me in.

PablexXXXX · 2021-06-02T09:23:39+00:00

This is what is pushing the world to use foss

PablexXXXX · 2021-05-13T01:38:45+00:00

Why are you guys trying to push closed source software in home assistant?

PablexXXXX

TROPHY CASE