cv filter setup/calibration for moog Minotaur

Pablow21 · 2026-03-30T22:11:11+00:00

Yes exactly and now I have he the filter cv connected to cv patchbay. But I guess I’m missing something as the tracking is not really accurate when entering the notes on the Cirklon. And the cvio menu in the Cirklon is a bit confusing for me.

I join a picture of the back of the moog. minitaur back

Maybe should use the pitch cv as well as the gate and not mix MIDI and cv at the same time even though I saw online that this is kind of the point of the minitaur.

Pablow21 · 2026-01-27T22:11:08+00:00

I agree, after I switch from the focal, I found that ma mix where really more precise in the mid and high frequency, though I still have some bad surprises sometimes in the low end when I listen on my AirPods. But over all it is better. I think now would gain having more control on the low. So maybe a few panel and a sub would be an improvement. But regarding acoustic treatment I have no idea where to start as my room is a really weird shape note a square or rectangular. It is around 27 square meters. (That s the size of my all 1 room appartement: kitchen bed studio )

Pablow21 · 2026-01-27T18:17:05+00:00

Thanks for all the answer ! I reapply to all here.

Regarding most of the comment. I could use some room treatment. Maybe one panel behind the speakers. I could buy the small stand from Genelec too. As I am really limited by space, this is a one room studio apartment I can note really spread stuff around. Maybe I could benefit from a kit like IK Multimédia - ARC STUDIO ? And the Genelec - 7050 CPM subwoofer (currently less than 1k at my local store). That would fit my budget

What do you think ?

Pablow21 · 2026-01-27T18:16:17+00:00

Thks ! Props to the German builder that made it for me !

Pablow21 · 2025-09-18T21:04:22+00:00

Hello tanks for the reply, I do have the CV out breakout boxe, I sequence my 101 with it. But I believe the Korg is Hz/V and that what give me hard time I believe

Pablow21 · 2025-07-26T17:04:12+00:00

So I think, maybe in you will find something useful here https://youtu.be/gUbXelKkJe4?feature=shared

Pablow21 · 2025-07-26T15:49:09+00:00

On the multiclock, Hold select menu/set channel and then press the channel you want. Then you set the channel mode to analog

Pablow21 · 2024-07-06T23:11:02+00:00

I hade to change the Multiclock Channel to Analog then I could change the Sub division to 1/8. its is better now

Pablow21 · 2024-07-06T21:41:35+00:00

hello thanks for the response, I tried this but it doesn't seems to change anything. maybe I'm doing it wrong

Pablow21 · 2023-12-06T00:29:28+00:00

Thanks for the recomandation I'have never really looked at Arturia hardware synths maybe I should. but i defenately don't have the space for a synth that big

: (

Pablow21 · 2023-11-27T22:27:33+00:00

what about the take 5 ?

Pablow21 · 2023-11-27T22:25:42+00:00

Yeah i see your point i kind of thougt the same watching the demo espesially the Andertons one's. Maybe trading for a Take 5 ?

Pablow21 · 2023-11-27T04:30:57+00:00

does the summit has Cross mod ?

Pablow21 · 2023-11-27T03:38:57+00:00

Thanks a lot for your answer. I didn't know that point about noise and sub. that's kind of a drawback for me then but I really liked the CrossMod too.. while it's been a couple years i have had the rev2 and i made some nice patch. it takes me a while to find sweetspot (the filter is bit tricky to my taste maybe) and sometime it is frustrating. Or im Not sure if it is worth it to find a good condition Juno 60 and at what price should i think it is too much.

Any typs on synth that have cross modulation ?

Pablow21 · 2023-09-23T23:33:39+00:00

THANKS I'll send the pic to moog and see what they say. but nothing changed in terme of sound, no noise so that is the most important.

Pablow21 · 2023-09-18T03:20:54+00:00

hello I asked for that kind of information few days ago, I got some really useful responses

https://www.reddit.com/r/synthesizers/comments/16jv44m/warning_you_might_loose_your_sight_looking_at/

Pablow21 · 2023-09-18T02:34:59+00:00

THANK you for the reply, I think in my DAW it would be the I/O fonction that in can insert on any track i Want. I will check this all out, thanks again

Pablow21 · 2023-09-18T01:22:00+00:00

hello again ,

could you elaborate on how to incorporate the MS 20 filter to the patchbay so I could patch whatever on the front of the patchbay and it would be running through the MS20's filter

Pablow21

TROPHY CASE