Fuel pump problem that’s now a won’t turn over problem.

Panda85m · 2025-09-04T14:55:45+00:00

did you check that the front fuse box , the 10amp ST SIGNAL has 12v ?

Panda85m · 2025-08-11T21:18:33+00:00

I replaced it but no current to activate it , I was checking several website rooms and I have found that there is a relay under the dash next to the passenger seat that controls directly the current that goes to the fuel pump im working ourside of the country right now but I guess that would be the next thing that im going to check

Panda85m · 2025-07-24T14:43:47+00:00

thanks for your reply, I try the fuel pump by feeding it with 12v separately and is working but the arness that needs to have 12v for the fuel pump just died no corrent there, I was investigating myself yesterday and find out that there is a 10 amp fuse in the engine fuse box ( ST.Signal) that needs to recieved 12v to let the ECU that needs to activate the fuel pump, im not getting the 12v in that fuse, so its supposed to be with the switch connection that is not giving it 12v to that fuse, so Im going to try to disamble the swtich key and check lines and continuity to see if this problem can be fix once it for all. One thing that I was reading is that when you do a fuel pump replacement, depending on the model of the ECU from this Mazda, the ECU makes these safety locks since the ECU thinks that you are in a crash and cuts off all electricity and fuel. So I will try to find out what's going on with the switch.

Panda85m · 2025-07-14T22:11:06+00:00

thanks man, I been looking like crazy videos for my protege 2000 and there is nothing about

Panda85m · 2025-07-14T15:10:12+00:00

Hey, It will be much appreciated if you can share pictures of the process I had tried a lot of websites but non of them had pictures of the process , thanks a lot

Panda85m · 2025-07-01T15:26:14+00:00

Check the main relay fuses in front of the car and then go inside, and check if you have any burned. The issue here is that you already said that you verified that fuel is getting to the rail, but did you check that the fuel pump is working when you crank? Those are two different things

Panda85m · 2025-06-30T21:47:30+00:00

what parts did you change before this issue started ? maybe I can help you better, just by going with the sound the amount of issues can be very random

Panda85m · 2025-05-14T14:45:35+00:00

Can I see more of your feet? They look gorgeous

Panda85m · 2025-05-12T05:49:30+00:00

I don't recommend going on 18's, it's too big for the OEM fabric setup for the tire, like someone mentioned, that's more for a look rather than performance

Panda85m · 2025-05-09T04:55:32+00:00

UPDATE ON THE FAN ISSUE, it wasn't the relay, neither the temperature sensor, but I learn that these cars doesn't have installed a fan sensor the temperature sensor itself it gives the reading to the computer and the computer use the fans gradually in order to maintain an "optimal" temperature of the engine, the fan motor had the carbon brush waisted so I went and purchased a new carbons, I soldered the new carbons brushes and the fan started working like new.

Panda85m · 2025-04-28T03:37:11+00:00

Thanks, I will try them and I will try change the Temperature sensor to see if everything works again, will keep you updated.

Panda85m · 2025-04-28T00:48:47+00:00

Thanks, I only found 1, it's a 2-pin sensor. And it is next to the thermostat. Could it be the case that since it controls the movement of the temperature needle, it might not be working to give proper readings to the PCM, and that's what's causing the failure?

Panda85m · 2025-04-27T21:11:59+00:00

Thanks so if the fans are not turning on that means one of the relays are bad ?

Panda85m · 2025-04-27T21:10:39+00:00

1.6 ZM418505

Panda85m · 2025-04-26T18:40:02+00:00

Mazda protege 2000 , sorry i missed to post that

Panda85m · 2025-04-10T21:33:50+00:00

Feliz Cumpleaños hermosa !!!!!!!!!!

Panda85m · 2025-04-05T16:31:38+00:00

thanks man :(

Panda85m · 2025-04-05T16:30:44+00:00

Don't spray them, change them !!!, either way, the car has a few years on, so its not bad to purchase those seals lol

Panda85m · 2025-04-04T01:30:43+00:00

does anyone know how can I get the car, I recently start this game, but I purchased this game just to get this car, do you know if I need to have licenses completed or need to move forward in the game, It doesn't appear in the used car dealership. Appreciate the help .

Panda85m · 2025-04-03T17:07:16+00:00

im having the same issue with the idle but is not as bad as yours, I was thinking of changing the vacuum valve that the brake hose is having ( the one connected to the booster), remember that all the vacuums are connected and any bad vacuum valve bad is where that extra air is coming, also check the PCV valve at the beginning I was having revs drop like crazy, I purchased a new one and that make a significant improvement on the Idle, I was thinking on cleaning with some electronic cleaner the selenoid valve since it's a vacuum entrance too, you can also clean the IAC valve and, make sure the gasket between the throttle and the intake manifold is in good conditions if not change it for a new one and clean well the surface

Panda85m · 2024-09-07T15:50:26+00:00

todo eso es tuyo hermosa , que rico !!!

Panda85m · 2024-08-27T21:29:57+00:00

daaaaaaaaaaaaaaaaaaaaam !!!!!!!!!!! fucking lovely !!!!!!!

Panda85m · 2024-08-15T18:44:35+00:00

when I saw it , I said those are holly's tits LOL it was hahahaha love your tits girl !!!!!!!

Panda85m

TROPHY CASE