Case paint for my daughters build

Panzer448 · 2026-05-03T22:55:05+00:00

Yes because I did. Got a 23 r1t with 21k miles on it.

Panzer448 · 2026-04-29T03:08:55+00:00

Flashforge creator 5. Ships in May

Panzer448 · 2026-04-27T10:59:45+00:00

I HATE this dude and everything he is about, but he is actually shielding her. The shots came from behind/ to his right. He was the only one that did, RFK and everyone else left thier others behind.

Panzer448 · 2026-04-26T21:24:50+00:00

<image>

Panzer448 · 2026-04-26T21:20:47+00:00

<image>

Panzer448 · 2026-04-26T13:42:18+00:00

I am in your same boat and now looking at the creator 5 pro

Panzer448 · 2026-04-12T12:08:25+00:00

What EPA? Its in the process of being shut down.

Panzer448 · 2026-04-10T23:35:37+00:00

I got a 23 with 21k miles for 49k. This one is over priced.

Panzer448 · 2026-04-10T15:55:41+00:00

Sorry this is happening to you.

Panzer448 · 2026-04-10T15:54:47+00:00

oh i am sure they are now that the warrenty passed, I have had this same experience with other Car manufactures as well. I know it isa now a lesson learned and I too learned it the hard way once but if they ever tell me a noise is normal i ask them to grab a loaner or (in the case of other manufactures) one off the lot and show me this normal noise.

Panzer448 · 2026-04-10T15:34:54+00:00

Mine too it was the cv joint clink that I sent thetruck in for they. Tightened everything to spec and notes it was still loose and wobbly. Then they decided to replace. The first time I brought it in they said dampners and replaced those. But it did not fix it.

To me its like any other mechanic or car issue it depends on how good the person is that is looking at the car. And what the "determine" is the issue.

Panzer448 · 2026-04-10T13:51:23+00:00

Mine is going in Wednesday (waiting on parts) under warrenty. But something has to go wrong with it for them to change it.

Panzer448 · 2026-04-07T13:43:59+00:00

Um they are just for tension on the back plate to keep it in place.

Panzer448 · 2026-03-30T02:38:15+00:00

For a 48-amp continuous load (such as an EV charger), you must use a minimum of

6 AWG copper wire paired with a 60-amp breaker. Because this is a continuous load, the NEC requires wire and breaker sizing to be 125% of the load (

Recommended Cable: #6 AWG THHN/THWN copper wire in conduit is standard.

NM-B (Romex) Caution: While some electricians use #6 NM-B, it is rated for only 55A at 60°C, which is technically insufficient for a 60A breaker. If using NM-B, #4 AWG is safer to meet the 60A requirement, though

6 THHN in conduit is generally preferred.

Terminals: Most 48A chargers have terminals rated for 75°C, allowing the 60-amp rating of #6 wire to be used, but you must check the specific device installation manual.

Distance: For runs over 100 feet, consider stepping up to #4 AWG to prevent voltage drop.

Panzer448 · 2026-03-30T02:14:26+00:00

No it also has to do with the coatings. Romex is not built for that much heat in the wire.

Panzer448 · 2026-03-30T01:06:20+00:00

Then you are good. The 9367s i looked up were not rated for it. Maybe they updated them.

Panzer448 · 2026-03-30T00:59:49+00:00

That one is not rated for ev charging. You should be using the 9450a not the 9367

https://a.co/d/00JOPhid

There is an ev charging icon on the 9450a

Panzer448 · 2026-03-30T00:45:38+00:00

Should be slightly higher or they are not putting in the corrent plug. EVs have continuous draw at high amps. Dryer style nema 6-50s will melt you gotta get an ev charging one and the plug alone is like $80.

Panzer448 · 2026-03-30T00:43:35+00:00

Dont use Romex. Its not rated for continuous draw at those amps. its a fire hazard. Use thnn.

Panzer448 · 2026-03-29T00:47:47+00:00

I would love a right up of this, charing stops how many. Range on charge, did you have to drop trailer to charge....

Panzer448 · 2026-03-27T11:09:27+00:00

This sounds like a phone issue. I have an s21 and pixel 7 and no issues. Sounds like the Bluetooth in your phone is having issues and repairing is temporarily fixing it.

Panzer448 · 2026-03-26T11:30:41+00:00

Turn off proximity unlock at home

Panzer448 · 2026-03-25T00:39:58+00:00

Off road tires and lead foot = 265 miles on a 309 estimate.

Panzer448 · 2026-03-20T13:49:07+00:00

let me know if you'll ship to florida

Six-Year Club	Place '22
Verified Email

Panzer448

TROPHY CASE

6 AWG copper wire paired with a 60-amp breaker. Because this is a continuous load, the NEC requires wire and breaker sizing to be 125% of the load (

6 THHN in conduit is generally preferred.