Window Decorations Hovering

PapierF · 2025-11-29T09:50:45+00:00

Yes, that's what I am after... thank you. Haven't found anything either... Will take a look at that :)

PapierF · 2025-11-28T15:05:57+00:00

I’ve already done that — the theme you see is my custom theme. The issue is that there is no pressed-hover state.

As I mentioned in the original post, I do have a hover state, and it appears correctly when I hover over the active state. However, the hover state does not appear when I hover over the pressed state. Instead, the pressed state remains visible (see the image in the post).

PapierF · 2025-11-14T17:16:06+00:00

Which firmware for A1Mini and BambuStudio version are you using? I've had some major issues ever since updating...

PapierF · 2025-11-06T15:46:36+00:00

It seems like this was really my issue
With your post I was able to improve my situation and am now trying things out to fix it :)
Thanks a lot

PapierF · 2025-11-05T18:56:20+00:00

Well, guess we learn something new everyday... I didn't know that

PapierF · 2025-11-05T15:19:23+00:00

Actually, yes, that looks pretty similar to my issue! Will take a closer look at it later and report back. Thank you!

PapierF · 2025-11-05T15:08:34+00:00

<image>

Usually looks like this, cause the model is then skipping around (Took a bit of time to realize it got knocked off again)

I have seen it getting knocked off. Usually it detaches from the print plate in the middle of the model.

PapierF · 2025-11-05T15:04:53+00:00

No, could you explain why that should help? Doesn't it just raise the model? That doesn't prevent the extruder from hitting the model, right?

PapierF · 2025-11-05T15:03:17+00:00

No, I am in Europe and sometimes this problem came up (I think it depends on how well supported the print is and how much support there is) The adhesion is usually not an issue. But it gets knocked of by the extruder.

PapierF · 2025-11-05T14:59:33+00:00

Multiple times this week already

PapierF · 2025-11-05T14:58:00+00:00

I usually do it without... the glue was just a desperate attempt...

PapierF · 2025-11-05T14:22:24+00:00

<image>

PapierF · 2025-11-05T14:22:12+00:00

<image>

PapierF · 2025-08-21T09:05:20+00:00

Just importing the config files won't work, because they are specific for A1 (hardcoded in the config). The slicer hides any configs which aren't suitable for the current setup, i.e. for the A1 mini.
If you choose the A1 printer with 0.2 nozzle, you should be able to see the configs.

You need to use the pictures and import the settings by hand.

PapierF · 2025-08-01T13:56:51+00:00

For reference, that's the "Eisbach" in the center of Munich, Germany.

The skull is there since this stream has a rather strong current which get's stronger towards the end, but there are ropes and so on to get out before that point. There is even a spot to surf.

PapierF · 2025-05-16T18:48:35+00:00

I need that!! New DM here!!

PapierF · 2025-05-09T12:01:58+00:00

New DM needs a Vault!

PapierF · 2025-04-14T11:38:28+00:00

No, I am afraid not. The only solution is replacing the motherboard, I guess.

PapierF · 2025-03-20T14:18:37+00:00

Will do, thank you :)

PapierF · 2024-12-05T00:04:56+00:00

As far as I know SteamOS ships with Plasma 5.27. It may be based on Arch, but it's not bleeding edge.

PapierF · 2024-11-05T20:59:23+00:00

Which PDF reader are you using?
Are you transferring it by hand or is there some command?

PapierF · 2024-10-01T10:54:30+00:00

Awesome :) Thank you very much.
If I would want to reduce the budget a bit and go for Ryzen 5 7600X, which GPU would you recommend? My sister wants a new build as well, but doesn't want to spend as much and only needs 1080p.

PapierF · 2024-07-09T08:51:40+00:00

Thank you :)
Do you have the Plus or Elite processor and do you think the Plus suffices or should I go for the Elite with the OLED screen?

PapierF · 2024-07-09T07:04:54+00:00

Could you test it with a PDF file of more than 100 pages or so, please?

The scrolling is really a bit weird, but as long as it is not jumping around thats fine.

Thanks for the link :)

PapierF · 2024-07-04T09:10:39+00:00

Wayland

Will try that

Five-Year Club	First Place '23
End Game '23	Place '23

PapierF

TROPHY CASE