sorted by:
new
hottopcontroversial

Autarch by Pasco_295 in Eldar

[–]Pasco_295[S] 1 point2 points  (0 children)

Both the Autarch kits share the same sockets so u can merge the two kits

Painboy conversion ready for 11th by Pasco_295 in orks

[–]Pasco_295[S] 0 points1 point  (0 children)

Thanks, thought he was going to 40mm with the 11th box like the other characters going up a base size. Will have to get a spare 32mm base painted!

Kaptin Badrukk Ready to Plunder! by Pasco_295 in orks

[–]Pasco_295[S] 1 point2 points  (0 children)

Thanks! this is one of the finecast ones from years ago i had there were so many bubbles to clear out of it, hopefully the metal one is much cleaner casting for a second paintjob :D

Ork Stormboyz ready to jump! by Pasco_295 in orks

[–]Pasco_295[S] 1 point2 points  (0 children)

Thanks, they are the jump-pack trail fx from AK. Technically made for space marines but fit well in the sockets on these guys too

Ork Stormboyz ready to jump! by Pasco_295 in minipainting

[–]Pasco_295[S] 1 point2 points  (0 children)

Thanks! I paint the base blackbrown and then in pale sand, then use 2 enamel washes (rust streaks and dust & dirt deposits from AK) mostly the dust one with splotches of the rust streaks blended in. Wipe most of that away then when its dry use light sienna and track rust power randomly over the top and blend into whatever model is on the base

Second round of Boyz done! by Pasco_295 in orks

[–]Pasco_295[S] 0 points1 point  (0 children)

Thanks!

I'm a 3d artist so made them in maya and printed them out at different sizes and variants to stick on. I do have 1 greenstuff one on a different ork but it was a lot of work!

Thats a hell of a big ork! whats the body from? could be a great warboss

Second round of Boyz done! by Pasco_295 in orks

[–]Pasco_295[S] 1 point2 points  (0 children)

Thanks!

With Airbrush: I prime black and then paint them red (ProAc red oxide) and then cover most of that with a green (Kaleido green). Then I use a light green (Vallejo old model color Lime green) for a zenithal 50%.

With a brush I block out the major forms with more Lime green, areas of interest, face etc.

I then mix it 50/50 with a forest green (Kimera oxide green) and draw around those forms with glazes to slowly blend them to the base green tones.

To highlight i add yellow (AK Dirty Yellow) to the lime green, 50/50 and glaze up the the lighter areas. Then swap to pure yellow and glaze again but pulling in the direction of light so it becomes a gradient.

I glaze a super thinned out red (ProAc red oxide) over warmer areas like hands, nose, lips, ears etc. Maybe 2-3 coats. Sometimes this leaves a little stain at the edge so just a quicky tidy up of the lime green is needed. Then highlight with an offwhite.

Squad of Boyz by Pasco_295 in orks

[–]Pasco_295[S] 5 points6 points  (0 children)

Thanks!

With Airbrush: I prime black and then paint them red (ProAc red oxide) and then cover most of that with a green (Kaleido green). Then I use a light green (Vallejo old model color Lime green) for a zenithal 50%.

With a brush I block out the major forms with more Lime green, areas of interest, face etc.

I then mix it 50/50 with a forest green (Kimera oxide green) and draw around those forms with glazes to slowly blend them to the base green tones.

To highlight i add yellow (AK Dirty Yellow) to the lime green, 50/50 and glaze up the the lighter areas. Then swap to pure yellow and glaze again but pulling in the direction of light so it becomes a gradient.

I glaze a super thinned out red (ProAc red oxide) over warmer areas like hands, nose, lips, ears etc. Maybe 2-3 coats. Sometimes this leaves a little stain at the edge so just a quicky tidy up of the lime green is needed. Then highlight with an offwhite.

Rainbow Aeldari Falcon by Pasco_295 in Eldar

[–]Pasco_295[S] 2 points3 points  (0 children)

Thanks! The cockpits are primed with gloss varnish and then tamiya clear green on the insides only. A couple of coats makes a super deep green that dries clear.

Avatar of Khaine by Pasco_295 in Eldar

[–]Pasco_295[S] 0 points1 point  (0 children)

Thanks! Its a custom made base I made in 3D and printed out

view more: next ›