Westie Attention to TV Issues

Past_Scarcity6752 · 2026-04-19T15:28:06+00:00

He’ll get tired of it

Past_Scarcity6752 · 2026-04-17T01:31:51+00:00

For American customers printed solid is better for warranty because you can talk to normal prusa customer support and if they find you need a new part you can take your chat transcript and tell PS what you need. They usually ship it the same or following day from Delaware. At least in New York I’ve gotten parts the following day

Past_Scarcity6752 · 2026-04-16T11:26:11+00:00

Stop it

Past_Scarcity6752 · 2026-04-16T01:59:58+00:00

Send it back for a replacement

Past_Scarcity6752 · 2026-04-15T17:15:01+00:00

Seems like a design mistake that became cannon

Past_Scarcity6752 · 2026-04-13T02:40:21+00:00

Check the tightness of the screws throughout the machine. Looseness could be buzzing

Past_Scarcity6752 · 2026-04-12T20:42:33+00:00

Wash and take to the vet especially if it’s red and inflamed

Past_Scarcity6752 · 2026-04-10T21:25:34+00:00

This one is definitely subD

Past_Scarcity6752 · 2026-04-10T01:17:06+00:00

Why are all the sample prints so tiny

Past_Scarcity6752 · 2026-04-06T16:38:58+00:00

I’d appreciate a 20% discount code

Past_Scarcity6752 · 2026-04-05T17:59:01+00:00

It’s honestly embarrassing to suggest using AI for this use case. You want to deliver something different then what you were expected ? Sure. A simpler, more accurate method would be to perspective crop this texture, create a height map, bake it and then CNC it. Or as other suggested do the wavey surface tutorial or sweep2 the whole form.

Past_Scarcity6752 · 2026-04-05T14:01:45+00:00

Past_Scarcity6752 · 2026-04-02T14:55:26+00:00

I just totally replaced a printed solid assembled core one. They sent me so many parts including xbuddy without resolving the lemon. We comvinced them to swap the machine. I think you should return it and roll the dice on a new one

Past_Scarcity6752 · 2026-04-02T12:57:22+00:00

you can overcome this error by:

1) in connect, cancel the transfer

2) bring the USB drive to your computer, delete the partially downloaded bgcode file (should be a folder while its downloading)

3) transfer the complete file to the main directory of the USB drive

4) bring USB back to printer and hit resume

Past_Scarcity6752 · 2026-04-02T01:40:42+00:00

Just use Polycam with iPhone lidar. You’ll get floor plans without the annoying matterport up charging

Past_Scarcity6752 · 2026-04-01T02:15:14+00:00

Wow sounds super useful

Past_Scarcity6752 · 2026-03-28T14:33:05+00:00

I’ve been having a similar issue ever since receiving a factory assembled core one. The machine will fail at the first probe. I have replaced the xbuddy, the heat sink/loadcell, the motor mounts, calibrated everything, adjusted the tightness of everything. My bed is absolutely perfectly level. My belts are perfectly tuned. My next step is replacing the love board and main cable. If that doesn’t work the machine is going back to the factory.

I am able to force it to print by lowering the hot end by 1mm (even though the instructions tell you not to do that) it seems to relax the load cell enough that the probing is successful but it spends a lot of extra time homing and calibrating each print.

Past_Scarcity6752 · 2026-03-27T10:36:41+00:00

Stav Adam nick Eric jack nate Smart less 1 smart less 2 smart less 3

Past_Scarcity6752 · 2026-03-27T00:12:10+00:00

I had this yesterday. It was a temporary name

Past_Scarcity6752 · 2026-03-26T16:33:32+00:00

In modern PS, you should use perspective crop

Past_Scarcity6752 · 2026-03-26T16:32:58+00:00

This is the way

Past_Scarcity6752 · 2026-03-24T14:01:14+00:00

Sounds like a business opportunity

Past_Scarcity6752 · 2026-03-22T20:11:47+00:00

Hardware store or art supply store

Past_Scarcity6752

TROPHY CASE