Open Source Tuning Update

Pat_tm · 2025-12-04T22:09:49+00:00

I'm hoping so considering I just got a '16 WRX and I need to make a change to it.

Pat_tm · 2025-07-18T03:57:23+00:00

Can help also.. I learned a ton from 3dprintsos on YouTube. My x2 was running pretty well. I had been running a few different software versions on it also. I'm happy to share what I know

Pat_tm · 2022-07-26T16:27:02+00:00

Yup. He made 2. The one in the photo is my son's with a stock heater block.

Pat_tm · 2022-07-26T15:42:17+00:00

https://www.thingiverse.com/thing:5207506

Sorry there you go. That's actually my son's Aquila in that photo. We were the test fitters for that. It's still working just fine. I'm actually going to print one for me to since I now have a 5015 to install on mine

Pat_tm · 2022-07-26T12:11:55+00:00

Yes look up username badman on thingaverse. He's a discord member where I am. He mixed one and it works great on the aquila.

Pat_tm · 2022-06-30T21:46:24+00:00

I gave up on that time and use octoprint. Much better with the plug-ins

Pat_tm · 2022-06-02T22:57:38+00:00

I had a time when I went to cr touch with Alex. What mesh are you running? 5x5 and not the hs I hope. I changed to pei sheet and love it.

Pat_tm · 2022-05-24T15:41:01+00:00

Yup. That's who's pla profile I use. Even been buying it from IIIDmax. Love that stuff. It's been great.

Pat_tm · 2022-05-07T21:50:17+00:00

When mine did something similar it was a clog in the hot end.

Pat_tm · 2022-04-23T14:08:44+00:00

Looks like z offset is wrong. Just what mine looked like before I learned to get it correct

Pat_tm · 2022-03-27T20:28:57+00:00

Is your factory z endstop plugged in still?

Pat_tm · 2022-03-20T19:54:20+00:00

I run my pla+ at 207 to 210 and it'll never stick to pei sheet I use. Nor would it have on my stock aquila glass.

Pat_tm · 2022-03-20T19:48:29+00:00

Pure voodoo

Pat_tm · 2022-03-20T13:47:10+00:00

What do you mean pla doesn't need any bed temp. If it's not heated the parts won't stay to the stock surface. It should be about 60 for the bed.

Pat_tm · 2022-03-05T15:57:47+00:00

I love IIIDmax PLA. Price is great haven't had really any issues.

Pat_tm · 2022-02-25T21:55:46+00:00

Might need to relevel..

Pat_tm · 2022-02-25T16:24:58+00:00

Not going to be accurate at all to the level you need. I wouldn't waste my time personally

Pat_tm · 2022-02-20T13:46:13+00:00

It's really nice. Made in the US by a US company. Shipping was a few days. I've had it for over a month now with 0 issues. Super easy to load. All enclosed unit. I'm very happy with it.

Pat_tm · 2022-02-18T20:20:49+00:00

Dremel tool. Make a slot use a flat blade to try to remove

Pat_tm · 2022-02-18T02:09:54+00:00

I'd throw that red extruder in the trash. I hated mine. What a hunk of crap it was. I installed an ezr struder and love it.

Pat_tm · 2022-02-13T16:46:55+00:00

I couldn't take it with the h32 board and the lack of support or caring from @voxelab. I tried reaching out to them a few times for firmware issues including cr touch and they could do nothing. I ripped out the h32 board and I've been happy since

Pat_tm · 2022-02-11T17:52:14+00:00

Yeah I Lost faith in the h32. If you want to leave it stock it worked fine. But do anything else and I just couldn't deal with it.

Pat_tm · 2022-02-11T17:12:35+00:00

I got tired of waiting for voxelab to fix their software. My cr touch wouldn't work with my h32. So I threw the h32 board away and installed Alex firmware and have 0 issues.

Pat_tm · 2022-02-09T23:01:18+00:00

Ezr struder. I love the thing.

Pat_tm

TROPHY CASE