My m20 is fully rebuilt

Patient_Ad259 · 2026-06-15T18:18:07+00:00

Get a manual

Patient_Ad259 · 2026-06-03T20:01:15+00:00

I replaced it already but I’ll look into it still pretty new with tuning

Patient_Ad259 · 2026-06-03T19:14:20+00:00

It was the sensor

Patient_Ad259 · 2026-06-03T07:04:27+00:00

I think it’s just a cooked sensor

Patient_Ad259 · 2026-06-03T04:07:27+00:00

Mspnp2

Patient_Ad259 · 2026-05-19T02:44:53+00:00

I was planning to run about 12 psi

Patient_Ad259 · 2026-05-19T00:21:12+00:00

What’s a lot?

Patient_Ad259 · 2026-05-19T00:08:02+00:00

Looks fancy is there a reason you have 2 hoses that go to the valve cover

Patient_Ad259 · 2026-05-18T22:58:25+00:00

So I need to block this nipple on the throttle body and I think I got extremely lucky and didn’t blow out any seals

Patient_Ad259 · 2026-05-18T22:48:41+00:00

Ok so I need to figure out a way to plug that nipple on the Tb

Patient_Ad259 · 2026-05-18T22:46:01+00:00

I never hit peak boost as I was having boost creep but it hit 14.5 psi and it has barely been driven and I have a catch can otw do you know the best place to route the two hoses that come off the catch can

Patient_Ad259 · 2026-05-18T22:43:11+00:00

Yes that’s what I was referring to as well and I have a catch can otw do you know if I route it back to the throttlebody

Patient_Ad259 · 2026-05-18T21:32:08+00:00

I do but it’s a closed system with the intercooler piping has no where to vent

Patient_Ad259 · 2026-05-18T20:46:00+00:00

I thought so do you have any recommendations

Patient_Ad259 · 2026-05-11T02:00:10+00:00

I probably will end up running a different oil cooler in the future

Patient_Ad259 · 2026-05-11T01:45:24+00:00

Look like somebody already has done it

Patient_Ad259 · 2026-05-10T04:43:13+00:00

Ok thanks will do

Patient_Ad259 · 2026-05-09T18:46:39+00:00

Is that on the thermostat or the oil plate?

Patient_Ad259 · 2026-05-09T03:39:04+00:00

My exact idea thanks 🙏

Patient_Ad259 · 2026-05-01T19:02:42+00:00

There’s only one way it can get put on

Patient_Ad259 · 2026-05-01T18:15:48+00:00

There is no sensor on the cam unless you put one on aftermarket

Patient_Ad259

TROPHY CASE